[DIY] 👍Fantastic Enclosure for Powerful Laser Engraver ORTUR Laser Master 2 Pro S2 / WOODWORKING✅ 

Thanks for the wonderful comment.

Thank you for your valuable comments. Your praise makes me happy. See you again with a good video.

thank you!!

Yes, very often, I make mistakes too. I review my plans sufficiently to avoid mistakes as much as possible, and keep checking them from time to time while working. Thank you for liking my video. See you again with a better video.

I wouldn't. It's pretty, but it's what's called safety theater. Extraction is insufficient to ensure fumes stay contained in the box and are properly removed through the hose, the clear plexiglass doesn't add any protection from the laser light (the shroud on the machine likely isn't high enough optical density to effectively filter the wavelength the laser is emitting) You're better off with no enclosure and putting the whole machine in an isolated shed, wearing a multigas respirator (about $30) and using a $20 sheet of high optical density acrylic as a portable eye shield for observation. If you don't have a dedicated shed or sealed room where you know people won't end up without PPE, a garage with some powerful shop fans directed to create a negative pressure with doors wide open to allow fumes to vent and don't let anyone enter the garage during use or for about half an hour after use without PPE.

I replaced the fan with a bigger one. Then it was much better than before. I chose transparent acrylic to make it easier to film the process. Therefore, color acrylic plates with a blocking function are recommended for those who make them.

I have no plans yet for a video explaining my workshop. It will be done in a while.

a.aliexpress.com/_oDYrtlt Thank you.

Thank you. The windows are just plain windows. There are no plans to add an air filter system.

Nothing special. I drilled a hole and pulled the wire out and reconnected it to the controller. thanks

This is clear acrylic. This is a window without UV blocking function. However, there is no problem because the laser head has a protector that blocks UV rays. thank you.

Yeah I didn't think of a camera mount. I didn't think I needed a camera.

@@carpentak When I had my camera mounted well, I really got a lot of use out of it for positioning things quickly and easily. But on the new machine, the case bends too easily, so I can't trust the camera.

This is to send the smoke inside the box to the outdoors.

I don't have plans. Instead, I'll show you this. instagram.com/p/ChlqPy1PVIt/?igshid=YmMyMTA2M2Y=

Your work is precise! Even your brad nails are perfectly spaced.

thank you. I used 12mm and 9mm plywood to make this. What you see as 18mm is wrong. The 12mm is difficult to assemble by tightening the pieces, and the dovetail assembly method was used to make it strong. The cost is of course less than that of a laser. I did not upgrade the head. When the next new model comes out, I'm going to replace the whole thing.

The one I used is just clear acrylic. So there is no filter function.

The wiring is not long enough. I barely managed to get the job done. Of course you can too.

I can't make plans, but I'll be seeing detailed pictures of these dimensions on my Instagram soon.

hello. There is a link to purchase this laser machine in the description below this video. thank you

I don't know that model. can't do it

thanks for the nice comment . I don't make plans.

Thanks, I bought it here in Korea. So I can't give you a link.

The grid was created using Lightburn software. This program is paid. I don't know any other way

@@carpentak ok, and you created the grid on your own or is there a template? thx😉

I made it. Lightburn is easy to use. Leave your email address, I'll send you the file if you need it

@@carpentak Hi, great job on the enclosure, love it. I might copy it 🙂. Where did you find the grid? Or can you share the file?

Thank you This is the bumper for the cabinet door. I can't give you a link because I bought this here in Korea. You can find it on sites like Amazon.

I bought this and chose the 70mm size. Of course, it would be better to use a larger one, but I am satisfied with this. a.aliexpress.com/_mPvWg6C

It's called a scissor lift. It's on Amazon, etc. Thanks.

This is the link I bought it from. a.aliexpress.com/_mO4RQ5w

The smoke is very well vented. The fire hazard of lasers is always present, even if it is not a wooden enclosure. I always watch from the side when I work.

thank you. It was created and used with my own lightburn software.