No video :(

DIY 1000W Fiber Laser Cutter Part 4: Wiring Electrical Components

Подписаться 18 тыс.

Просмотров 28 тыс.

50% 1

If you want to build your own fiber laser cutter, join our Patreon group: / diyfiberlaser
In part 4, I wire all of the electrical components and continue building out the frame.
I've been working on building this DIY 1000W fiber laser cutter for the past 6 months and I've finally reached the stage where I've begun successfully making test cuts with the machine. Because I could not find any guides on the internet to help me with the build, I am going to create a series of videos sharing what I've learned during the process. Please understand that I am a novice on the subject, and that fiber lasers can be very dangerous, if you are going to build or use a laser, please do your own research and understand the safety risks!
My website: www.id3ntitycr...
My design portfolio: www.id3ntitycr...

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@jcorrea8597 Год назад

From an Industrial Electrician, looks like you did a good job with the wiring.

@DannyBokma Год назад

Same colours for AC and DC, EMC filter wiring and mounting like this, to only name a few 🙊. It's good enough for prototyping, but its not good enough for any real standard.

@jcorrea8597 Год назад

@@DannyBokma true, but for someone who is new to it he did a good job with connection and routing. Plus this is for personal use not commercial, so he doesn't have to use iso wiring standard.

Год назад

Nide Video adn great work, keep it coming. Slight oversight in the beginning, that I saw in your other video as well, when you measure the steel square and say 20 centimeters, it is actually two centimeters or 20 millimeters.

@_Kensky Год назад

Thanks for this episode! And now I want to modernize my workshop.

@MoffTigriss Год назад

Just adding a bit of experience after building custom 3D printers : don't mix AC and DC cabling in the raceways. It's better to work on when you need to debug with the machine powered on (yeah, not a good idea, but it WILL happen), and it's a security for the improbable catastrophic mechanical failure. Also, swapping the DC PSUs with the distribution rails will reduce the length of AC, and will let you neatly separate the AC side of your cabling from the DC one. Especially when you use black/red for AC (if there is one point critical, it's this one). Nothing vital, but a clean separation can help a lot. Put a plexiglass panel in front of the AC side (with a cut for the breakers), and it's very fool proof. Overall, a great series i will follow ! ;)

@diyfiberlaser Год назад

Thanks for the feedback...I see your point and will definitely consider that in the future

@The_Foolish_Fool Год назад

Personally, I'd take off that reflective material on the walls. Lasers being lasers and all.

@diyfiberlaser Год назад

Thanks, I agree....I 'm thinking I would like to paint it all a matte black

@The_Foolish_Fool Год назад

I just thought of a question, can this machine engrave or is that not possible with such a powerful laser?

@82edje Год назад

Hallo, nice and clean job. Some tips. Mount everingthing on an metal plate. This is common for control cabinets. Use different wire colors for your mains voltage and your controls DC voltage. Your earth wirering looks likes therr missing something. Check the manuals. Normaly your emergency stop button is connected to a safety relay. The safety relay contacts switch a main relay that switch on all you devices like motor drivers, fans, ect. It also enables a mail air valve. After a emergency stop you have to reset the safety relay with a reset button Good luck with everyting

@maksimstriletskii3108 Год назад

This is awesome. A very thoughtful approach!

@pevlabs Год назад

Very clean electronics install. Nice work!

@christopherreeves6797 Год назад

Nice work!

@centurialinc Год назад

so awesome! I am impressed.

@weldchip Год назад

Love the videos really interesting build. I notice you keep saying cm instead of mm 😉 don't make that mistake In cad or your parts will come out really big 🤣

@wildniscamper7276 7 месяцев назад

0:29 20 cm... 20mm🤣 outstanding project!!!

@sonaxing Год назад

You should centrate the collimating lens, when the cut is not regular in a 4 shapes the problem is the center of the beam. Other problem that you can have is the nozzle, try to use nozzle 1.0 for 3mm 0,3 mpa of pressure 2500 3000 mm/s

@jesseservice7828 Год назад

Muito bom ! Parabéns.

@russ-techindustries Год назад

What is that machine in the background on the workbench? It looks like a small desktop cnc lathe. Maybe?

@russ-techindustries Год назад

Never mind. I just stumbled upon your video about it! 😂

@guidoherzog1777 Месяц назад

Hello Travis, I am currently setting up the same system only with CO2 tube and fiber laser. I also bought the Raycus1500 and the new RDC6563FG-LITE controller (has the same connections) You wrote that the wiring instructions from the Ruida controller to the Raycus were not correct. Do you have a wiring list that you can give me so that I don't have to test everything first. I would be very grateful. Kind regards from Switzerland Guido

@diyfiberlaser Месяц назад

The wiring diagram is on my Patreon page, the pins might be different from the F version, I don’t have the Lite user manual to check

@guidoherzog1777 Месяц назад

@@diyfiberlaser many thanks for your answer

@gamedevsa Год назад

Hi Travis, thanks for the video. Do you perhaps have a link where you bought the Fuji Servo motor? Thanks!

@diyfiberlaser Год назад

Sorry, no, I bought it used on eBay

@AGeekNamedRoss Год назад

Can you use Lightburn w/ your laser build?

@priyanto2708 Год назад

Bisakah saya minta wiring source laser ke kontroller

@theater40 Год назад

From a controls engineering stand point, the biggest issue is, that that is a lot of high voltage,and high current stuff. Really needs to be in a steel enclosure. (Electrical code) massive fire hazard...

@zoedplaser Год назад

👍👍

@chasegraff3333 9 месяцев назад

0:28 CENTIMETERS?!?

@nick066hu Год назад

About wiring the laser source wiring: What were the conclusions of those guessings? (just in case we meet that same incorrect Ruida diagram) One more thing I even more wanted to know: How does someone 'test fire' a 1000W laser ? (I hope that bruise on your left thumbnail is not a result of a test fire :-)