DIY: 981 Porsche Cayman S Brake Pads Replacement and Caliper Stud Conversion

Подписаться 50 тыс.

Просмотров 17 тыс.

50% 1

Product used in this video (affiliate links):
Front Brake Pads
OEM: bit.ly/3ee1WkO
Track: bit.ly/2Q0VvJO
Rear Brake Pads
OEM: bit.ly/3siVCNK
Brake Wear Sensors
Front: bit.ly/3uYNXWq
Rear: bit.ly/3wXtMKu
Brake Pad Lubricant: geni.us/NYhBRlX (Amazon)
Loctite: geni.us/BugKh (Amazon)
Electronic Torque Wrench: geni.us/cApzrMH (Amazon)
Wire Brush: geni.us/NdZn (Amazon)
Craftsman Tool: geni.us/4HfLk8 (Amazon)
Some of my favorite MUST HAVE products (Affiliate links below):
I custom make F8X and F3X mud flaps! Email me at got6speed@gmail.com
Best cheap BMW MOD!! LED Door Strips
Sedan F80 F30 Light Strips: geni.us/OPSDGvP (Amazon)
F36 Gran Coupe Light Strips geni.us/k4Fr (Amazon)
Headlight Trim: geni.us/hiCuH (Amazon)
My Radar Detector and Mount
• V81: Uniden R3 Hardwir...
Save 12.5% on your BlendMount: blendmount.refr.cc/tomaszl
Radat Detector Uniden R3: geni.us/xBlCN (Amazon)
Dash Cam: geni.us/7UKmcS (Amazon)
Favorite in-car wireless charger mount!: geni.us/BgHZ (Amazon)
Stick-on charger holder: geni.us/31uts (Amazon)
Coding your BMW:
• Easy BMW coding with B...
Apple Adapters:
Kiwi 3: geni.us/B5Pq9ku (Amazon)
Veepak (the one I have): geni.us/kNc8Re3 (Amazon)
VGate: geni.us/eakZxBL (Amazon)
Android Adapters:
OBDLink: geni.us/E0vbQ (Amazon)
Veepak: geni.us/kNc8Re3 (Amazon)
VGate: geni.us/eakZxBL (Amazon)
Get bootmod3 here: www.kiesmotorsports.com/produ...
Bootmod3 Cable: www.kiesmotorsports.com/produ...

Авто/Мото

Опубликовано:

15 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@reshadstv5419 3 года назад

Great video Tommy 🔥

@TommyLGarage 3 года назад

Appreciate it

@jusssy5078 3 года назад

Great video, I'm definitely going to change mine myself when the time comes. I see you found the yellow arm to hold the hood cover 😎

@TommyLGarage 3 года назад

Yes thanks!!

@AHeatedMess 3 года назад

Your garage looks great 👍🏽

@TommyLGarage 3 года назад

Thanks !

@MikeJenicCycling 2 года назад

Thanks for the video! Did you put the parking brake in to service mode or did you just leave it off? After the new pads was there any initialization of the parking brake needed?

@jklok 3 года назад

Thanks Tommy!

@TommyLGarage 3 года назад

You bet!

@palja04 3 года назад

Could you please share the brake stud kit length you chose? Thanks.

@gjhunter9326 2 года назад

Is there a link to the caliper studs that I am missing?

@DarkTouch Месяц назад

add the brake line bracket studs as well. this will help avoiding to cross thread those holes as well.

@TommyLGarage Месяц назад

Good call!

@elvisahern3474 Год назад

I found this video very useful but I would like to add some things from my own experience. 1) I had trouble getting the studs to go in smoothly. The bottom studs went in hand tight without an issue but the top studs would not. One went in about 70% and the other barely 30%. I did not use a thread chaser and I was very liberal with my use of grease to prevent galling with the bolts so I assumed that was the issue. Even the top bolts required a socket to remove. I had to replace both front knuckles because the bolts stripped so I was anxious to use studs (rears don't require that many changes but not wanting to take the chance) and I was very cautious when inserting a bolt. I was able to get the 70-80% stud using a little amount of force. I had to use the thread chaser for the more difficult case. I needed to use a wrench to get it fully into the bolt hole, and even with a dry run on the caliper stud I needed to use a wrench to get it into place, and 2) previously I had no trouble replacing my rear rotors but this time one rotor did not appear to be sitting flat against the spindle but it turned out that the screws resolved that part.

@TommyLGarage Год назад

Thanks for the input

@angelo12321 2 года назад

Thanks Tommy another helpful video. Question: I've seen in other videos that the abs sensor needs to be removed too. This was a PITA for me. Did you do this without removing the sensor?

@TommyLGarage 2 года назад

I did not remove the sensor at all. Just unbolted the bracket.

@lonniecrook1684 3 года назад

Brake caliper stud conversion link??

@DerekNYC 3 года назад

Excellent DIY. I'd be curious how you lap times in the 981CS compares to your times in the F80. Do post them after your first track day. My guess is the F80 is faster but the 981 is overall more balanced and engaging but harder to exploit given lack of turbo available torque. Any chance your at LRP 4/19?

@TommyLGarage 3 года назад

I think the f80 may indeed be faster but this will feel like a gokart

@chenzhen802 3 года назад

You should do some video for replacing belt and water pump for M3, there not much tutorial videos out there. Love all your videos ❤️

@TommyLGarage 3 года назад

Thanks!

@JPGianfortune 2 года назад

Thanks Tommy. I really enjoyed the video - very clear and concise! I'm thinking about doing the stud conversion as you demonstrated. Quick question though. Once the caliper studs on on the car, how does one compress the pistons? It would seem you no longer have the play needed to move the caliper back and forth as you did. Thanks again...

@TommyLGarage 2 года назад

Just use the hand side of the hammer to push them in. Make sure the brake fluid reservoir is open.

@JPGianfortune 2 года назад

@@TommyLGarage Hmmm... I'm thinking about the next time one changes the brake pads. Once the new studs are in place, how does one compress the pistons/pads to remove the caliper from the rotor. I'm new at this, but it would seem that the studs would prevent the back and forth movement of the caliper you demonstrated. I'm certain it's easy but I'm having a tough time visualizing it. Perhaps a new demonstration? Thanks and stay well.

@pl5778 3 года назад

Awesome video!! Was wondering if you will do a DIY on how to replace shifter cable. Its something I been wanting to do(numeric shifter cable) for a while but am no confident in doing so and theres lack of instructions online. Thanks and keep up the great content!

@TommyLGarage 3 года назад

Thanks. I will be looking into it for sure

@lonniecrook1684 3 года назад

I replaced my shifter and cables with the Numeric short throw shifter and cables in my 2016 Cayman S. I got all the support from the owner of Numeric that I needed. It's not a small job, but if you take your time, you should be able to work through it. My biggest challenge was removing all the interior trim pieces without damaging clips, tabs, etc. I think I counted about 30 pieces of trim that have to be removed to complete the job. It was sell worth the effort. The shifter is fantastic. It is so precise and tactile feedback is huge. I highly recommend installing this shifter.

@ICanReviewIt 3 года назад

Hey Tommy, a bit off topic but what car would you recommend for 30-40k? CPO S4? I am 25 and looking to finally get a sports car. Worth it to maybe save up for the F80?

@TommyLGarage 3 года назад

B8.5 is a solid car. But I would get an rs5 for that price.

@ICanReviewIt 3 года назад

@@TommyLGarage I'm guessing you're not a fan of the B9? Should I consider a 340? Wanted something with a warranty for the next 1-2 years

@loekfelten548 3 года назад

You should also do a wheel stud conversion, just like with the BMW 😉

@TommyLGarage 3 года назад

Looking into it actually :)

@revolt360 Месяц назад

Thanks for the guide, followed exactly. But I now have brake pad warning and red exclamation warning light on. Will these go out or do I need to perform a reset? Thanks.

@TommyLGarage Месяц назад

You should not have any warnings. Make sure you connected the brake pad wear wires as I showed and the message will go away.

@revolt360 Месяц назад

Thank you. Went back round the connections and found a loose one. All sorted 👍

@TommyLGarage Месяц назад

@@revolt360 happy to hear!

@palja04 3 года назад

What torque spec did you use when tightened caliper on converted studs? Also could you please share the length of stud you have purchased? Thank you in advance, Tommy!!

@neosaifamily 3 года назад

awesome video, first time seeing a caliper stud conversion. Why do you need to do a stud conversion and is the conversion expensive?

@TommyLGarage 3 года назад

It's around $300 all-in. It just saves you from having to replace the studs every time you do the brakes.

@angst1974 3 года назад

The uprights are aluminum and will eventually strip out with the steel bolts. Mine should be here tomorrow for my 718

@micraw714 3 года назад

Nice job! So you don't have to do anything regarding the electronic emergency brake when changing the rears? Wonder if I could bypass that when doing my Macan brakes 🤔

@TommyLGarage 3 года назад

Nope. Just make sure your e-brake is not engaged

@JRod2326 3 года назад

Great video! Loctite link?

@TommyLGarage 3 года назад

I just added it In the description. Thanks!

@slytherben 2 года назад

Did you like the pads? Were they awful on the street?

@TommyLGarage Год назад

They were great on the street. A bit squeaky but that’s it

@Scoobyfreak86 3 года назад

#schmear. Great video as always, sir.

@TommyLGarage 3 года назад

Thanks !!

@nycshelbygt500 3 года назад

Stainless Steel Brake Lines for both cars. Violet needs her own Mechanics Creeper Seat.

@TommyLGarage 3 года назад

I already bought new lines. Will tackle the swap soon

@Scruffy91 3 года назад

We’re those new GTS tail lights on the F80 👀👀👀👀👀

@TommyLGarage 3 года назад

Coming soon!!

@pauljoyquilter359 3 года назад

For a slightly nicer and more long term solution to your electrical tape on the wires, use some heat shrink tubing.

@TommyLGarage 3 года назад

Good call. I might do that. Thanks!

@DocHoss 2 года назад

Thanks for this suggestion, swapping pads for my 981 boxster gts today for my first track session and will do this!

@deep6thisdeep6this92 3 года назад

porche oem calipers are brembo calipers with the porsche logo on them. they are not bespoke either. you can buy the exact same calipers (and rotors) directly from brembo if you have cross-referenced the porche and brembo part numbers. same for many sports cars, (i.e. aston martin, only aston martin will jack up the price 3-400%, whereas porche only about 100%)

@TommyLGarage 3 года назад

Good to know. Thank you!

@throker 2 года назад

Are you resting the calipers on "Legos"?😁

@amdrew5667 3 года назад

Ty Tomku naprawde powinienes miec jakis warsztacik dla jakis fajnych furek!

@TommyLGarage 3 года назад

Musze najpierw prace rzucic

@amdrew5667 3 года назад

@@TommyLGarage niestety albo stety męska decyzja

@Baerchenization 3 года назад

The calliper bolts don't tend to strip, because they are stretching bolts, and therefore single use. You need a new set for every brake job. So if they are stripping, you are doing it wrong ;)

@TommyLGarage 3 года назад

Even a better reason to swap!! :)

@angst1974 3 года назад

not the caliper bolts , but the uprights they bolt into strip

@Shadowmanners 3 года назад

I thought you were talking about shmee150 at first when you kept saying shmeeer lol

@TommyLGarage 3 года назад

I love Shmeeeeeeeeeeeeee

@DarkTouch Год назад

RED LOCKTITE! you should also change the front and rear pad springs.

@TommyLGarage Год назад

Good point

@robertmassucci1 Год назад

why not replace the sensors? Doing shit like this all over the car turns it into a nightmare for future owners.

@TommyLGarage Год назад

Because I swapped for track pads before track day so dealing with sensors is a pain. Also these sensors are not needed - people who don’t know their pads are worn just by looking at them should not own a sports car.

@bldn10 Год назад

@@TommyLGarage With the sensor wires twisted together do you get the BRAKE warning light? I don't like having a bunch of "CEL"s even if they mean nothing.

@sump22 Год назад

@@bldn10 The sensor works by always having a connection when you have enough pad, so tying them together makes the car think the pads are always fine. When the pads wear and break the connection between the two wires is when you get the light. So tying permanently keeps the light off.