DIY Bed Night Table Shelf

Подписаться 61 тыс.

Просмотров 1,7 тыс.

50% 1

DIY Bed Night Table Shelf
In this video I will show you a simple project that you can adjust to your personal needs. My daughter wanted a removable night table or shelf for her bed. So here is the full process of making this project.
Kids house bed - • Easy DIY Kids Bed | Fr...
Underbed storage - • DIY Under Kids Bed Sto...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #kidsbed
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Хобби

Опубликовано:

6 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@CasualDIY 3 месяца назад

Kids house bed - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_iSmwASTimI.html Under-bed storage - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-coDOkYYupCQ.html

@MCsCreations 3 месяца назад

Stunning little shelf, Tomasz! Awesome work! 😃 The mistake now can be a place to put your fingers when taking it off the bed! Anyway, stay safe there with your family! 🖖😊

@CasualDIY 3 месяца назад

Thank you for watching mate 👍

@MrFoxLogan 3 месяца назад

id like to thank you for doing all your videos, i recently bought the rage 5 tablesaw and your channel has become my goto place.

@CasualDIY 3 месяца назад

Glad to hear it and thank you for watching 👍

@markduggan3451 3 месяца назад

Great little project.

@CasualDIY 3 месяца назад

Thank you for watching

@nanakchand2699 3 месяца назад

Nice work

@CasualDIY 3 месяца назад

Thank you

@michaelplays2449 3 месяца назад

Nice Job !!! well done

@CasualDIY 3 месяца назад

Thanks 👍

@simonr6793 3 месяца назад

Tomasz, cracking idea and nodoubt your daughter is going to be putting it to good use. Well worth the effort especially when it comes down to the item being for your little one 😅😊. As always brother 💯% 👍 🇬🇧.

@CasualDIY 3 месяца назад

Oh she loves it. It's a storing place for her Teddy bear and a drink 😅

@simonr6793 3 месяца назад

@@CasualDIY 🤣😅🥹 brilliant, you gotta keep the Teddy safe .

@AllanBlount 3 месяца назад

As usual, a very informative and good video. 👍🏼

@CasualDIY 3 месяца назад

Thank you for watching

@rarecraftsman 3 месяца назад

Mistakes happen to everyone dude. Another nice little project and video! Thanks man

@CasualDIY 3 месяца назад

Hehe thank you

@dougdavidson175 3 месяца назад

My concern is that the slots to hold the shelf are cut to deep. Will there be enough strength in the grain to hold in the long run? Brillant design. Take care and stay safe.

@CasualDIY 3 месяца назад

I was thinking the same, but the fit is snug which means no movement. I did put significant amount of pressure to test it out and it seems to be OK. Maybe 18mm ply would be a better choice for this project. But I wanted a unified look so it matches the bed. Time will tell how it will hold out.

@BasilsWorks461-uo8bq 3 месяца назад

I'm sure you considered running a dowel vertically down through the back and as overkill at the front of each brace.@@CasualDIY

@CasualDIY 3 месяца назад

@@BasilsWorks461-uo8bq you could run a dowel or even a screw however the fact is that the joint/ wood bracket would only come under significant stress if there was some play between the bed rail and the shelf. However this is a snug fit so the whole shelf is resting on the beds slats. Therefore there is no bending or flexing force going on the U shape cut out. I'm fairly confident than this will last till my daughter is ready for a new bed ;) However if this will ever break you can be assured I will report this on my channel with a relevant fix👍

@barry.w.christie 3 месяца назад

I hope you routed d another slot in the top of the other side 🤣... the only thing I'd worry about is the relatively small amount of wood on the back hanging piece, it looks like it'd snap quite easily ... but another cracking addition to your daughters bed 👍 I had a similar mishap with the bamboo speaker cabinets I'm making at the moment, I started cutting a piece to length and only realised something was off about 5mm into the material ... needless to say I then had to fill the cut with another bit of wood!

@CasualDIY 3 месяца назад

I think plywood would be a better choice as the material. But I wanted a uniformed look so went for the same pine board. When the shelf is on and resting on the bed slats there is no movement or flexing due to snug fit. But time will tell if the wood will give way. I tested it and put some weight on it and it was fine, no flex no "cracking sound"🤣 Yes mishap happen quite often in my workshop 😅

@barry.w.christie 3 месяца назад

@@CasualDIY Completely agree that plywood would have looked naff ... just thinking, if it does snap, just drill a hole down from the top and glue it all back together with a nail (or screw) glued it 👍

@CasualDIY 3 месяца назад

@@barry.w.christie True, that's a good and strong fix option.