DIY "Breadboard" UV-C EPROM Eraser for under 10$

Подписаться 4,3 тыс.

50% 1

Relatively Universal ROM Programmer shield kit REV 1 now in stock: www.imania.dk/samlesaet-hobby...
In this video I make a cheap Do-It-Yourself UV-C EPROM eraser with a 254nm lamp kit.
65uino kit (ICs BACK IN STOCK ): www.imania.dk/samlesaet-hobby...
Shipping available to 51 destinations worldwide.
Buy a ready made commercial UV-C EPROM eraser: s.click.aliexpress.com/e/_DDs...
(You support me by using this link to buy)
DIY UV-C bulb set: s.click.aliexpress.com/e/_DnF...
(You support me by using this link to buy)
The E26 socket I scaled down to use for the E17 bulb:
www.thingiverse.com/thing:592...
If need a new (and much less DIY) T48 programmer you can use with Minipro, you can buy one here: s.click.aliexpress.com/e/_DCC...
(Affiliate link)
Schematic and KiCAD project files for the programmer: github.com/AndersBNielsen/Rel...
Complete schematic, source code and everything about the 65uino (including the source code used for the programmer):
github.com/AndersBNielsen/65uino
Join the free clubhouse on Discord: / discord
Let's chat about what you like best about old chips, electronics, breadboards and hacking all sorts of things!
Check out my other 6502-inspired videos: • 6502 Computer
Join this channel to get access to perks that let you see videos early and make you stand out in comments:
/ @andersnielsenaa
Song: Arcando & Maazel - To Be Loved (feat. Salvo) [NCS Release] Music provided by NoCopyrightSounds Free Download/Stream: ncs.io/tobeloved Watch: ncs.lnk.to/tobelovedAT/youtube

Наука

Опубликовано:

12 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@AndersNielsenAA 2 месяца назад

Thanks for all your support! Relatively Universal ROM Programmer shield kit Rev1 now in stock: www.imania.dk/samlesaet-hobbyelektronik-og-ic-er-relatively-universal-rom-programmer.htm Questions? Join the free clubhouse on Discord: discord.gg/kmhbxAjQc3

@satchuck 2 месяца назад

Thank you for sharing the design and testing process. It helps us beginners understand and learn quicker.

@KallePihlajasaari 2 месяца назад

As mentioned in your other video I think your project is a great service to the DIY community. Many retro computer and reverse engineering projects are faces with older EPROMS and serial EEPROM programmers are mostly unable to read them. If you ever redesign the PCB my suggestion is to have all the jumpers and links on the exposed side.

@AndersNielsenAA 2 месяца назад

Thank you :) I like to help where I can.

@notlogan2563 Месяц назад

Love the safety considerations for the UV radiation. Also the USB-PD usage. My bodged-together setup uses a UV-C LED and a 555 timer driving a boost converter to take 5V up to 9-ish to overcome the forward voltage of the diode. This is far more elegant and less hacky :)

@AndersNielsenAA Месяц назад

I like the 555 as boost regulator - haven’t tried that.. yet :D

@Rich-can-do 2 месяца назад

Looks good. UV lamps are something you don't want to sun tan with. I have your 65uino kit. Looks great. I have been busy fixing up/ Cleaning up this room. I like it nice. I am a bit of a neat freak. I enjoyed this video, and I wont star at any UV lamps.

@KallePihlajasaari 2 месяца назад

Regularly in Finland school kids and others make bird nesting boxes. Looks line your UVC enclosure with an extra hole.

@AndersNielsenAA 2 месяца назад

I think the school children might take offence with that statement :D I'm really not proud of my box - but at least it works.

@ignesadau4793 2 месяца назад

I think it’s a great project 😊

@VVerVVurm 2 месяца назад

nice work .. I have since tested the cheap phone sterilizer and it works too .. the positioning of the chips is a bit awkward but with some blue tack it works fine

@AndersNielsenAA 2 месяца назад

That's actually surprising, since I assume they have UV LED's - which are crazy expensive in the

@VVerVVurm 2 месяца назад

@@AndersNielsenAA well mine has a U-shaped quarz gas discharge light on either end

@AndersNielsenAA 2 месяца назад

@@VVerVVurm Ah! I believe I’ve seen those tubes too, those should work just like this - but the first many results from the markets show LED versions .. which I guess are also less effective at their advertised purpose.

@H3wastooshort 2 месяца назад

Maybe adding metal foil tape onto the walls of the wooden box would make erasing faster by also reflecting light that would otherwise not hit the chip

@AndersNielsenAA 2 месяца назад

And/or the lid too. Good idea!

@levko1111 2 месяца назад

I've built my eraser using a T8 UV lamp - whatever was able to find. But now I can erase ten EPROM simultaneously 😅 Also, when you erase UV EPROMs - always short all the leads together (e.g. using a piece of foil). UV light induces a current (photoelectric effect) which may damage the chip

@AndersNielsenAA 2 месяца назад

Yup, I've noticed the T8's - actually I could've just replaced the tubes in my "UV-B" lamp with those but this was... somewhat insignificantly.. cheaper :) Wouldn't shorting all the pins make it worse - letting current flow where it doesn't belong? My logic can be very flawed. I wonder why the datasheets don't mention this.

@KallePihlajasaari 2 месяца назад

@@AndersNielsenAA All UV erasers I have ever seen had conductive foam in the tray. I think the risk of photoelectric charge build up will be low. Shorted, resistive or open pins will probably all work fine.

@AndersNielsenAA 2 месяца назад

Thanks for the insight - I didn't really have much experience to go on for this little project.