DIY Custom Built Truck Bed Drawers 2018 F150 (part 1) watch part 3 for the fully Finished!! 😀 

Thank you very much ! 🙂

Hey , Ronald Tucker , if you have any questions on anything, feel free to ask , the video was an after thought , wasn’t even originally planning on making one , so pictures is all I had , maybe I’ll do another explaining the process as the pics go by , thanks for watching !

Thanks bro ! My biggest fan haha 😆

Thank you !

Thank you ! Sorry fir the late reply , the black diamond plate is actually 1/4” thick rubber matting sourced at princess auto in Canada , the drawer pulls are from Amazon and I love them , rfid card locks are from Amazon , not very heavy duty but they do the trick and have held up so far and are reliable, dived slots I used smooth 1/4” plywood and the Chanel was some aluminum stuff in the fencing area of Home Depot the inside of the drawers and drawer fronts is black auto carpet from canadian tire , can also get at any automotive store I believe , I also found the RBP badges there and then cut the carpet out so I could inlay them to make it look factory , I left the Bed liner in the truck and it’s perfect c they have 4 square cutouts in the liner , so on my base of the box I measured exactly and added four square pieces of plywood glued and screwed so that it falls right into place , and up at the front I used eye hooks and turnbuckles to hold it in , not that it even needed them , it’s two drawers and also have a pop up for the deep cycle battery and one for the inverter , also behind each of those there is another two compartments above the wheel wells that come up . Thank you for watching-Jory watch part one to see it being built , it’s a shitty video of pics and music LOL 😂

Thank you !

Freshwater Fiend thank you very much for the kind words bro ! , I’m not much of a video maker , but I do enjoy making stuff on my time off , if you have any questions feel free to ask . Thanks for the sub

@@jorylemottee6668 well I may take you up on that offer once I get started. Headed back offshore in the morning so it'll be a few weeks before I get back.

Watch part three of you wanna see the finished product. 👍🏼

@@jorylemottee6668 yeah I watched it. I really like the inverter idea. Are those side compartments water tight?

No not water tight , I keep the tonneau cover on it basically full time until I need the deck , then I don’t mind if it gets a bit wet ,

Al Kat thank you for the kind words ! Part 3 shows a little more of the finished product , The first video was an after thought ,the handles and rfid card locks were from amazon , and very good prices , the rfid card locks are not heavy duty by any means but they do the job keeping the drawers latched, And let’s face it , they were different and cool lol 😂 , the handles are very well made and spring loaded, also the cables for the second battery are jumper cables off amazon , and the rest is from princess auto and homedepot I’ll send you some links 👍🏼

Al Kat Reliable Hardware Company... www.amazon.ca/dp/B00JQYVJNS?ref=ppx_pop_mob_ap_share Electronic Cabinet Lock Card... www.amazon.ca/dp/B07M98B19B?ref=ppx_pop_mob_ap_share Reliable Hardware Company... www.amazon.ca/dp/B00JJ192NW?ref=ppx_pop_mob_ap_share ［20 Pack］608-2RS Ball Bearings -... www.amazon.ca/dp/B07TWZ7X38?ref=ppx_pop_mob_ap_share Stick-on Anywhere Portable Little... www.amazon.ca/dp/B06XQ39PMF?ref=ppx_pop_mob_ap_share 200 Amp Mobile Audio Relay... www.amazon.ca/dp/B085WRQW72?ref=ppx_pop_mob_ap_share 2 Pack Inline 100A Circuit... www.amazon.ca/dp/B07W788KQQ?ref=ppx_pop_mob_ap_share 60PCS Terminal Connectors Cable... www.amazon.ca/dp/B07S7J6BC6?ref=ppx_pop_mob_ap_share EPAuto 4 Gauge x 20 Ft 500A Heavy... www.amazon.ca/dp/B01AXBB2VG?ref=ppx_pop_mob_ap_share Linkstyle DC 12V 24V Car... www.amazon.ca/dp/B07MJGGJFR?ref=ppx_pop_mob_ap_share

Thank you Shahab ! From the bed to the top of the box is 11” which gives about another 11” to the top of the box , I didn’t want to go to tall for a few reasons , tall drawers mean you will fill them lol and never be able to find things , and also I wanted to put things in there without having to worry about them flipping out . Thank you for watching ! -Jory

Jake Noack thank you ! I’m actually in Langley bc . Not too far from the boarder , if you have any questions let me know , glad to help !

Jory LeMottee not too far at all. Thanks for being so fast to respond. I will reach out if I have any questions.

Jake Noack no worries ! Sounds good 👍🏼

Jake Noack here’s the finished product Jake Noack ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DDZv-xkW7zE.html

Thanks Micheal , I ordered the bearings off of Amazon , they are just skateboard bearings , I believe they came in a pack of 50

Unfortunately I didn’t make templates , I just had an idea and built it , I may possibly take it apart come spring/summer it’s a bit of work , so I’ll have to see lol