DIY Guide To A Professional-Grade Epoxy Garage Floor Coating

Подписаться 951 тыс.

Просмотров 32 тыс.

50% 1

Professional-Grade Epoxy Kit: concretefloorsolutions.com/st...
10% Discount Code (Enter At checkout): ehr10
I will walk you through the full installation of a professional-grade epoxy garage floor kit. By doing this yourself you will get superior results as compared to DIY Rust-Oleum kits and save $1,000's in labor costs from hiring a professional. There are many critical steps in this process and I will walk you through start to finish including anything I did wrong and what the finished product looks like.
Free Home Maintenance Checklist:
everydayhomerepairs.com/home-...
Chapters
0:00 DIY vs Pro Epoxy Garage Flooring
1:59 How To Grind A Garage Concrete Floor
5:53 Filling Concrete Floor Cracks, Chips, and Spalls
8:08 Final Cleaning and Temperature Ranges While Applying Epoxy Coating
9:14 Supplies Needed For Professional-Grade Epoxy Garage Floor Coating
12:40 Applying The Epoxy Primer (Layer 1 of 3)
15:14 Applying The Intermediate Epoxy Coating and Flake (Layer 2 of 3)
18:42 Applying Anti-Skid and Clear Coating (Layer 3 of 3)
21:23 Final Results And Product Impressions (Also What Not To Do)
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Хобби

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 121

@wg8304 25 дней назад

I have no reason to watch this video, but yet I’m intrigued.

@EverydayHomeRepairs 25 дней назад

It is a interesting process 🙂

@anatoliybelyshev4916 3 дня назад

lol same here ! 😂

@philpeters8200 25 дней назад

Having used an epoxy coating in two different garages I can't emphasize how important it is to properly prep your floor. The degreasing/acid wash method is not adequate. Grinding down the concrete is an absolute must. Failure to do so will ensure poor adhesion of any product. Scott does a wonderful job of explaining the process. Don't shortcut any steps. Good materials cannot overcome poor prep.

@EverydayHomeRepairs 25 дней назад

Amen, thanks for the feedback!

@Busydadgarage717 25 дней назад

Just had a quote for this job from a professional company. $4200. This is well worth the effort for the savings and results! Well done!

@EverydayHomeRepairs 25 дней назад

Was the $4,200 for a 1 day project? There are some new-ish companies and processes that get in and out in 1 day.

@Busydadgarage717 25 дней назад

@@EverydayHomeRepairs yes. 1 day and done. That was their deal.

@jfmaniac5118 25 дней назад

I'm loving the beetle or whatever it is, it's been with us through the whole process so far :)

@EverydayHomeRepairs 25 дней назад

😂, just hanging out the whole time

@DJGrenadier 12 дней назад

I was not expecting flashbacks to the summer I spent running a grinder in commercial moisture mitigation. Some tips: 1) Rent the stand up grinder. Running a hand grinder on your knees will humble you real quick, and hitting those edges is going to suck. 2) The vacuum is only gonna get like 80% of the concrete dust. Make sure you have the correct respirator and ppe. Once that silica is in your lungs it don't come out. Throw plastic sheets over anything left in the garage. 3) We had much longer mixers (3-4ftft), which are much easier on your back when mixing 4) Get a roll of heavy construction paper and tape it down either outside the garage or in the hallway as a safe area to mix, change shoes, etc 5) We used large, cheap paint rollers for our epoxy - toss the rollers as soon as you're done and pop another one on if you needed it

@EverydayHomeRepairs 12 дней назад

All great points, thanks so much for the feedback!

@DJGrenadier 11 дней назад

@@EverydayHomeRepairs Apologies if that sounded critical. Your video was great, I actually learned a lot myself - just sharing some knowledge for the guys who are about to take the plunge (who aren't as young as they once were)

@BackyardMaine 21 день назад

Great video Scott. Very informative.. What an awesome result.

@philsmock4943 25 дней назад

Great video Scott. After watching your video I'm going to hire it done. I'm old and not up for that much of a DIY challenge. Thanks for sharing.

@EverydayHomeRepairs 24 дня назад

You bet, at least now you have an idea of the different steps even if you get it hired out. Knowledge is power 👍

@peterpowers4851 14 дней назад

That floor looks amazing and you clearly put a ton of work into getting it like that. I used the DIY kit from the box stores back in 2017 in my last house and it failed within a year. It started peeling up under where the cars parked at first (I noticed it was where the water would drip off of the cars and sit on the ground) but then continued to spread. By the 3 year mark before I moved, the floor looked absolutely horrible. It was always peeling and chipping and those peices of the coating would always be all over the garage floor and would always find their way into the house. I tried many times to peel it all up, but with just a scraper it would never come up and would just chip away in random places over time. If anyone read this far, avoid the DIY kit at all costs unless it's going to be used on a low foot traffic area that will have no sitting water on it.

@hassanbazzi3545 25 дней назад

Wow. It is definitely shows the best out of the three. You get what you pay for. Well done.

@Vincent-rq4dx 25 дней назад

Another thing is you can use the angle grinder and grind the side concretewalls right below the drywall, and then use a paint roller and put on more epoxy + flakes, gives you a really nice clean look on the edges too! Plus its more waterproof kinda like caulking your corners in the shower!

@EverydayHomeRepairs 25 дней назад

I agree and would have done that exact thing if I didn't have the expansion joint all the way around.

@Vincent-rq4dx 25 дней назад

@@EverydayHomeRepairs oh wow that was a joint? Just looked like the edge my bad! Interesting spot they put it!

@ReclusiveMountainMan 24 дня назад

Yes, def worth the upgrade. Great job.

@2023_GJ 25 дней назад

Very nicely done. Love your videos - they have helped me with so many household projects. But my conclusion at the end of this one is that I don't care about my garage floor all that much 🙂 I refinished a bathroom floor (over nasty saltillo tile with huge grout lines) using the rustoleum product. It's fine except that it's so dangerously slippery. Going to tear it all up and go with LVP next year anyways.

@Rhaspun 25 дней назад

Yes. I watched a few videos from another channel. It was a professional doing the garage floor treatment. He said grinding is the only way to have a good long lasting epoxy coating. Your floor coating looks really good.

@EverydayHomeRepairs 25 дней назад

💯

@ElMoeMan 24 дня назад

Thanks Scott, another perfect video as usual!

@EverydayHomeRepairs 24 дня назад

Thanks so much for the feedback and support 👍

@archermark29 24 дня назад

Great video and excellent results, thanks for this demo!!

@EverydayHomeRepairs 24 дня назад

You bet!

@budnspud 25 дней назад

I think this is amazing. I had the DIY coating on a concrete floor and it did fail at the 6 month mark chipping etc.

@EverydayHomeRepairs 25 дней назад

Thanks for the feedback!

@joelhollingsworth6172 25 дней назад

Nice video. I did this when we bought our home seven years ago with a 3-car garage during a week when it poured rain the whole time in Seattle. The Oneida Dust Deputy was a good addition for the shop vac to help with concrete dust (yes, there's lots of it). Used a different product with only a single step epoxy but quite similar otherwise. It's held up great except for cracking using a floor jack to lift cars (added a plastic sheet to distribute weight under jack which solved that problem). I was surprised at how far what seemed like a small amount of epoxy spread on the floor. I do it myself again.

@EverydayHomeRepairs 24 дня назад

Thanks for the feedback. It is a nice project where if you follow the steps and take your time the results are awesome. Also, not bad saving $2,000 - $3,000 as compared to getting it hired out.

@gnieto532 12 дней назад

My question does pill off when tires are hot ,does pill off after how many years

@johndonnellan9535 25 дней назад

Informative video, thanks.

@EverydayHomeRepairs 24 дня назад

You bet!

@readyplayer2 25 дней назад

It ideally wouldn’t need to be said, but if you’re using a gas powered grinder, make sure you leave the garage door open and set up ventilation to blow the byproducts of combustion out. If you have living space above the garage, ventilate that too.

@T_Jonesy 25 дней назад

Looks amazing. Great video. I think its worth the extra money.

@EverydayHomeRepairs 25 дней назад

Agreed and thanks for the feedback!

@larryseibold4287 24 дня назад

Nice work. It looks like those spiked shoes really make it a lot easier not to mess up the sequence and flow of things.

@EverydayHomeRepairs 24 дня назад

Absolutely and those are a must have for this type of installation

@Wegetsignal 23 дня назад

Hmm I think I'll leave the concrete uncoated after all. The grungy look gives it character lol

@johnwrycza 20 дней назад

my Rustoleum lasted 10yrs, ended up thinning out, hot tires damaged it too diamond grinding off the old coating, and layering on the new epoxy+clear 5+ yrs ago; bombproof - and like others have commented; it the prep / grinding. also note; there's 2 different Rustoleum products being sold Rock Solid is the better option.

@martyb3783 24 дня назад

This is a great video. Please let us know how it lasts. Great job in both the installation of the floor and the making of this video!

@EverydayHomeRepairs 24 дня назад

Thanks so much!

@grilledflatbread4692 25 дней назад

500 ft garage is 80% the size of an apartment here. Geez that much storage space would be nice

@aaron74 25 дней назад

I *always* knew there were superior, industrial grade epoxy floor products available out there because I've seen really durable epoxy floors in commercial buildings that are definitely more durable and resilient than the Rustoleum product. If I ever do my basement I will be sure to use this far superior product. Here's a question: Are the flakes just for aesthetics, or do they actually add structure to the epoxy coating?

@eagl3ye 9 дней назад

I’m about to grind my old concrete floor and am going to acid stain instead of using epoxy. I think my problem with epoxy is that I’d constantly be subconsciously worried about it - even if I did the perfect prep job and used superior products. I’d constantly be waiting for that morning that I walk out into the garage to find paint coming up somewhere. With acid stain, it actually soaks into the surface, reacts with the minerals, and becomes part of the concrete. Couple that with a nice clear coat and you’ve got a maintenance free, durable floor.

@wilem1988 25 дней назад

Great Video mate. I have watched both the DIY version and this one, and just want to make sure - you mention not to wet the floor for the professional product. Is grinding the floor enough to get rid off the oil drip spot on the floor?

@EverydayHomeRepairs 25 дней назад

If you have oil I would get the specific primer they make for the oil problem spots to give you the best shot of it lasting. concretefloorsolutions.com/store/epoxy/cfs-oil-stop-primer/ and don't forget the promo code "ehr10" at checkout for a 10% discount 👍

@henrywit6147 25 дней назад

Great video! How does the time, energy and risk (no warranty) compare to a professional service?

@genefoster8936 24 дня назад

Thank you. This convinced me to not use the Rustoleum product.

@Pallidus_Rider 25 дней назад

Any thoughts on cutting additional expansion joints before applying the product? 🤔

@munkman70 5 дней назад

Been thinking about doing this-now I’m sold for sure. Quick question, I have designed splits in my concrete floor-like a sidewalk. Do I need to fill those?

@JER9279 25 дней назад

So is the epoxy inert when dry or does it continue to off-gas chemicals?

@victorpayne6586 25 дней назад

Wow

@timhill5426 25 дней назад

Awesome job!! Great info! Did you scrape or pickup any of the loose flakes before the clear coat? Is there any difference in the grinding profile between the hand grinder and the rental?

@EverydayHomeRepairs 25 дней назад

I left all the loose flakes in place. If I would have spread a bit more flakes I would have done a scrape and collection of the loose flakes prior to clear.

@EverydayHomeRepairs 25 дней назад

The grinding scratch/profile was pretty similar between the diamond cup wheel I had on the 4.5" and 7" grinders and the diamond pads on the rental.

@timhill5426 25 дней назад

@@EverydayHomeRepairs Awesome! All this info gives me the confidence to diy. Thanks!

@deanfiorentino6708 23 дня назад

HI Scott, Excellent video. How did you clean up the rollers between products? Or did you throw them away & use fresh roller for each product? Thanks again, dean

@EverydayHomeRepairs 23 дня назад

Fresh roller for each of the 3 layers 👍

@deanfiorentino6708 23 дня назад

How did you prep the corners?

@Hype2GAMING2 20 дней назад

Scott, what products did you use? We're doing this soon and do not want to go the kit way.

@kaseypoon 25 дней назад

How does the total cost of this project with pro-grade materials compare to the cost to hire the whole project out to the pros? I saw a video recently of a project hired out to pros in Alabama for a 3-car garage, polyaspartic, full flake, clear coat, that only cost $3600. I was shocked how low the price was!

@Chirita008 20 дней назад

Looks great!! That's A LOT of work for the avg DIYer. Not sure I would tackle that one. Given the cost of almost $2000 for materials, what would be and avg. cost of having a professional do it?

@ignacio..9 16 дней назад

$7-$10 per sq ft.

@nblracer 23 дня назад

Any reason why you did not beyonds the garage door?

@aantony 25 дней назад

Was there a sweep/vacuum after the flakes cured in? Wouldn't there be some amount of excess to remove before clear coating over it?

@EverydayHomeRepairs 25 дней назад

If you are doing a "Full Flake" there is often a scrape and collection of extra flakes. In my case I did a heavy flake and didn't do any collection of extra flakes and everything turned out great. You want to avoid clumps of flakes that would not be covered by the clear coat as that will change the final sheen and look of the surface.

@dougschadel8094 25 дней назад

Do you have to grind all the time before applying the priner and epoxy? I watched a few videos on epoxy coating but i havent seen them do it

@nothingtoseehere93 25 дней назад

Chemical coating doesn’t last and it’s crap you always need to grind

@markb.1259 24 дня назад

Wouldn't it have been better to wait until the fall for temps that wouldn't risk a bad seal of the coatings?

@TJOLLYRANCHER 7 дней назад

Is a one coat epoxy application done by a local company? Or should 2 coats and then a primer be definitely done??

@MrHartless2007 25 дней назад

Coatings will only last a long time, if it’s a fresh concrete pad. The curing of the cement will absorb the coating to hold. And it will cure for months

@JLeeChron 25 дней назад

Used the same rollers on all finishes?

@EverydayHomeRepairs 25 дней назад

Yep 👍 same type of roller from the kit but new roller for each of the 3 coatings.

@spaggs 21 день назад

how long was the curing time between the primer and intermediate coat?

@EverydayHomeRepairs 21 день назад

I waited about 7-8 hours. Between 8-24 hours is ideal assuming temps around 80F

@jpalarchio 25 дней назад

Apologies if I missed it in the video. Total cost and square footage for this garage?

@EverydayHomeRepairs 25 дней назад

With grinding tools/rental and materials $5 per sq ft.

@jpalarchio 25 дней назад

@@EverydayHomeRepairs I'll have to confirm but sounds like about 50% to 75% of paying to have it done. Good to know!

@Casmige 25 дней назад

If you don’t: * Diamond grind the floor?, * Test the hydration level seeping through? * Seal-Coat prime PRIOR to installing the epoxy, then flake, then Aspartic clear. Might as well not even bothering doing it.

@beanpotatoreviews184 25 дней назад

Being realistic, for a DYI how difficult would you call this medium, hard, pro, legendary?

@EverydayHomeRepairs 25 дней назад

I would say Medium to Medium-Hard.

@beanpotatoreviews184 25 дней назад

How many devices would you recommend renting rather than buying? You're putting a lot of confidence into someone who is newer into DYI @@EverydayHomeRepairs

@darrensaltiel440 6 дней назад

the reason rustoleum epoxy doesnt work for people , is a couple reasons , 1) the surface isnt clean or dry enough , its gotta be bone dry zero moisture let that garage dry out for three days after your acid wash . 2) the kits dont have enought epoxy primer or compound to lay thick enough before it cures . buy 2 for one . and mix both parts from each kit ie primers and compounds together separately so you dont run into color differences when it dries . 3) order extra flake and sealer . work fast but take your time and it holds up

@budnspud 25 дней назад

Link to shoe covers?

@EverydayHomeRepairs 25 дней назад

concretefloorsolutions.com/product-category/accessories/ and don't forget the promo code "ehr10" at checkout for a 10% discount 👍

@robertgemperline4282 16 дней назад

Pro grade ftw

@EverydayHomeRepairs 16 дней назад

👊

@Flightless_Mike 22 дня назад

Did you look into any other companies for supplying the product? Curious if there was a specific reason you used concrete floor solutuons over someone else.

@EverydayHomeRepairs 21 день назад

I had seen their videos and reached out as I liked the idea they were professional installers actually doing floors and also offering the same products they use for purchase. I worked with them on repairing a crack last year with their rapid set epoxy with great results. That is why I was confident in selecting their Epoxy floor Kit. 👍

@Flightless_Mike 21 день назад

Thanks for the response! And nice work!

@GannDolph 25 дней назад

You should have kept going onto the concrete driveway 😜

@oldfredbear 25 дней назад

So what would happen if you did the full grind, but the non commercial kit?

@EverydayHomeRepairs 25 дней назад

I think the results would be somewhere in the middle. The DIY kits usually don't come standard with a primer so if you get their primer as well and also used the clear coat you would have a much, much better shot of it lasting as compared to degreasing, etching, and apply the Epoxy/Flake which is the standard kit/process.

@coburn_karma 25 дней назад

A lot of work but worth it. Longevity is better than cheap way.

@EverydayHomeRepairs 25 дней назад

I agree for these type of projects where you are putting in some time it is nice to use the professional-grade products and have it last for a long time avoiding the same project coming up in 3-5 years.

@600fb411 25 дней назад

At the end of the video he stressed that the prep was the biggest difference between the products. Does that mean that the rustoleum is a good product if same prep was done?

@Casmige 25 дней назад

You really want 100% “solids”. The big-box store products are usually 50% or less (allows for longer drying and set-up time). If you go with the more solids mixture? Don’t leave it in the bucket you need to mix it in the bucket & then almost immediately start ribboning it out on the floor because it is vulcanizing in nature to set-up & the more concentrated it is (as in a bucket) the quicker it will set-up because it’s captured in such a small area…..Whereas ribboning it out onto the floor buys some more set-up time.

@GannDolph 25 дней назад

@@CasmigeThe main reason this happens is that the curing process is an exothermic chemical reaction (polymerization) that produces heat , and heat speeds up that same reaction. Thus you need to spread it out horizontally to avoid trapping and concentrating all that heat, which can basically cause a chain reaction of premature rapid curing. Same goes for bondo, quickset drywall mud, plaster of paris, RapidSet cements and mortars and so on..

@JohnLafitte 25 дней назад

22:46 The problem is, Scott, you grinded away the more budget friendly products before we could even see how well it held up. I respect that some people had it not last that long, but others did have it last. You usually are very good at doing things thoroughly and I would have liked to have seen how it fared for you over time. It would have been more beneficial to me at least.

@EverydayHomeRepairs 25 дней назад

Thanks for the feedback, unfortunately this house will be sold soon so I wouldn't be able to give the update in a couple years. Thanks for the feedback and I will keep that time of testing in mind for future garage floors 👍

@deroux 25 дней назад

The Flakes make it hard to see dropped nuts and bolts.

@EverydayHomeRepairs 25 дней назад

Yes they do 💯

@n9wox 25 дней назад

Depends on the flake colors

@acidbubblebath77 4 дня назад

The one big problem here is that the floor kit you are using has a stratospheric price tag.

@MrAgility888 25 дней назад

10:22 I hope that bug didn't get in the epoxy!

@EverydayHomeRepairs 25 дней назад

We had 3 or 4 that made there way in but overall that was less than I was expecting.

@Jcewazhere 25 дней назад

Epoxy floor in basement, yay or nay? Why?

@mattp4079 25 дней назад

the off-gassing of these products is a concern for enclosed spaces.

@nothingtoseehere93 25 дней назад

Humidity would be a concern you would need to add a moisture barrier but if you have plenty of ventilation it could be fine. Would be a pain to clean

@Sam-ey1nn 25 дней назад

This definitely does not seem DIY. And as others said on the last video- the tools and chemicals are so expensive you’re barely saving money over using a pro- who will almost certainly do a much better job. I still vote for buying rubber mats if you want to make the garage floor prettier. 🙂

@johnny8927 25 дней назад

Rubber mats seem like a good idea lol

@flapoverspeed 19 дней назад

Leave the cement ALONE!

@Gorgone73 16 дней назад

$1800 isn't bad. To hire someone would cost $10000

@edwindurst7992 9 дней назад

Why does it look like you are removing the two epoxy coatings that you just installed on your "rental" garage floor??? Are they so bad that you are replacing them after only a couple of months? you said, in that video, that you were doing the less expensive DIY coatings in your rental garage and you would use the professional-grade in your personal garage at home? I am trying to figure out how much truth is in these videos beause of you redoing the DIY floors in your "rental".