DIY High Pressure Oiler for Bridgeport or old Machines

Подписаться 29 тыс.

Просмотров 4,3 тыс.

50% 1

Here I show hot to make an inexpensive high pressure oiler for older machines. this is a very easy project that will give you very good results. Keep your old machines oiled up with this effective tool for your shop.
Make sure to turn the oiler upside down when pumping.
Get a Grease Gun Here to Modify! amzn.to/2XjNFuy
Precison Machine Shed Amazon Storefront:
www.amazon.com/shop/precisionmachineshed
Follow me on
Instagram: / precisionmachineshed
Facebook: / precisionmachineshed
Patreon: / precisionmachineshed
www.apexrifles.com
As an Amazon Associate I earn from qualifying purchases.
One time contribution via PayPal:
www.paypal.com...
E-mail: precisionmachineshed@gmail.com

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@danielabbey7726 3 года назад

I have an old mill and a lathe with those oil zerks, so this is very helpful. Great tip!

@precisionmachineshed 3 года назад

Glad it was helpful!

@georgechambers3197 3 года назад

That's all there is to it? Jeez, I thought it'd be much more involved than that. I guess I'll have to give it a try, thanks for the video! Happy New Year to you.

@ke6bnl 3 года назад

Got to use it upside down

@precisionmachineshed 3 года назад

Yes, I forgot to mention that in the video. Thanks!

@JourneymanRandy 3 года назад

That's a great tip. I will make one of those. Happy new year

@TheKnacklersWorkshop 3 года назад

Hello, Top tip there, thank you.... I am going to make one... Happy New Year... Take care Paul,,

@steveo1006 Год назад

Just found your channel with this video. Have subscribed. What an absolutely awesome mod. I’ve got the pesky ball valve oilers on my lathe and mill and they seem to force more oil outside than inside. This video has me thinking about replacing those ball valve oilers with grease zerk fittings and making your oiler. Now the disc w/O-ring was simply to contain the oil? There would be a hole where the plunger exited the tube so the disc was just an oil dam? Yes?

@smalltownmachineshop6860 3 года назад

Very cool mod

@TheAyrCaveShop 3 года назад

Good tip...

@homemadetools 3 года назад

Nice job. We posted this video on our homemade tools forum this week :)

@precisionmachineshed 3 года назад

Thanks, hope it helps some folks out!

@nowayjerk8064 3 года назад

NICE

@thereve 3 года назад

Cool. Now make a manifold and mount up the grease gun so you can shoot a little oil into all the fittings simultaneously

@precisionmachineshed 3 года назад

Good idea!

@AtimatikArmy 3 года назад

Love tips like these. Just curious, could you have used just regular old grease in this case or is that improper lubrication for these ways?

@precisionmachineshed 3 года назад

They were not designed for grease. My machine had grease in it that I spent a bunch of time cleaning. I run a way oil in most of the machine.

@AtimatikArmy 3 года назад

@@precisionmachineshed Got it, thanks for responding and the content.

@CSWmanofsteel 3 года назад

Just subscribed to your channel and asked about the phase 2 quick change tool post you adapted to your older lathe? Where did you find it? I have a old prentice bros lathe and would like to buy me that setup.

@precisionmachineshed 3 года назад

I bought it from enco which was bought by msc direct I belive.

@CSWmanofsteel 3 года назад

Thank you 🙏🏻