DIY Motion Sensing Rotating Camera Base

Kyle Martin Tech "GoPro Tips and Tricks"

Подписаться 148 тыс.

Просмотров 8 тыс.

50% 1

The long video: • Code Walk Through, DIY...
HSU Kit I used: geni.us/Dxp4m
Code for the Arduino: gist.github.com/KyleMartinTec...
In this video I build a DIY motion and sound sensing camera base. This thing is great as it lets you only have your camera rotate when there is someone in front of it.
Parts used in this build
Arduino Nano: geni.us/iBNl
2X Servos: geni.us/rkRn1
Perfboard: geni.us/m9S5M
Motion Sensor: geni.us/DIoAD
Sound sensor: geni.us/9tFzg8C
LM317: geni.us/GID58Y
Subscribe: goo.gl/JZ79Z
Channel: goo.gl/zE37u
Instagram: bit.ly/KyleMartinTech
Facebook Page: goo.gl/uUtKa
Twitter: bit.ly/KyleMartin
My Gear
Main Camera - Nikon D7100: amzn.to/1JeTApJ
Main Lens - Nikon 18-200mm: amzn.to/1Eu0fpw
B-Roll Lens - Sigma 10-20mm: amzn.to/1DaoeNp
Top down Camera - Nikon D3200: amzn.to/1vuBogs
Top down Lens - Nikon 18-70mm: amzn.to/1DSBfKG
Audio Recorder - Zoom H6: amzn.to/1DsMUiW
Lav Mic - Sennheiser G3: amzn.to/1Eu1wgh
Shotgun Mic - Rode NTG 1: amzn.to/1Cu4fnv
Voice over mic -Audio Technica AT2020: amzn.to/1BcWCXk
Computers:
Laptop - MIS GS70 Gost: amzn.to/179Zg2t
Desktop - Custom Built Processor - i7 4790 K, Ram - 32GB Corsair HyperX, Boot - 2X Crucial M5 256GB SSD in Raid 0, Mass Storage - 6 X Seagate 3TB HDD in Raid 1 + 2X WD 6TB HDD in Raid 1, Graphics - GTX 780, Monitors - 2X 27" Samsung don't know the model, Case - Corsair 600T. Find all components here: amzn.to/1FMtB3J
Editing software - Adobe Creative Cloud
GoPro Tips & Tricks
The channel GoPro Tips and Tricks is filled with useful, money and frustration saving tips as well as some tricks to make sure you get all you can out of your GoPro. Make sure you subscribe to be notified about new videos. If you have enjoyed the video make sure to like / thumbs up the video and like GoPro Tips on facebook for the latest updates. If you have any question or comments please leave them below or tweet me and I will get right back to you. If there are mounts, unboxing, reviews that you would like to see please let me know and I will do all I can to make it happen.
GoPro Tips and Tricks is not affiliated with GoPro. GOPRO, HERO, the GOPRO logo, and the GoPro Be a Hero logo are trademarks or registered trademarks of GoPro, Inc.

Хобби

Опубликовано:

21 мар 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@isaacwerk2630 6 лет назад

Love it! You are so smart!!

@isaacwerk2630 6 лет назад

I saw a video yesterday about modifying a GoPro Karma controller to extend the range of the Drone, but there was no info on where to get the parts. If you have time it would be so cool to see if it’s something you’d be interested in doing/ getting more info on. Keep up the creativity!!! 🤙🏼

@isaacwerk2630 6 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FpWIBcEqU9Y.html

@kylemartin101 6 лет назад

Just checked out the video. That thing looks really neat although I must stay I have never really had a problem with range with my Phantom 3. I do not have a Karma, I was slow to buy in and did not have the funds for one when it launched.

@smayansatpute 5 лет назад

He looks like Star-Lord!!

@sibat777 6 лет назад

Thinking about quickly finding the blank time to delete on the video, a third servo could rotate a colour blind to cover the lens when both sensors are off. You just have to look for and remove frames that are all one colour. I don’t know if some video editing software might be able to do this automatically. I know it is a bit of a crude method but just following the KISS design approach 🤪😁🤓. If you use the dash cam from your previous video you could drop the 5v input when both sensors are off and it would stop recording when no one about. Nice video thanks.

@kylemartin101 6 лет назад

Funny I was sitting on the toilet this morrning just after posting and I was think how perfect the SJ5000 would have been for this mount. I could have driven it right off the arduino. It would have been really clean and super simple. I do really love you paper idea! it is simple and would totally work. I don't think I would even try to do it in editing software. If you change your view to thumbnails in explorer it would would be obvious when the sheet was in front of the lense. I wonder if the same effect could be achieved by placing a few really bright colored LED just out of view of the camera and turning them on when the room went still. What you really need a easy way to know which frames to get rid of.

@sibat777 6 лет назад

Sitting on the toilet, too much information lol👍🏻

@JaybayJay 2 года назад

That's exactly what I was looking for. If you put the motion sensor on top of a cylinder rod would it be able to track 360 i guess and have the rod twist and point the camera that way.. I was thinking I want to learn all this stuff. My dad, his da and my moms brother were engineers and I wish I had of learned from them as a kid. Learn to make a radio out of a piece of stale bread..

@JaybayJay 2 года назад

One of the things I'd use it for would be a security system with a small micro camera.. people think it's a flag, meanwhile its tracking them. Can the motion sensor pinpoint the location of the movement and track it effectively I guess but I'm sure you can now in 2022..

@samm1797 6 лет назад

Hey Kyle I already have a gopro hero session and I was wondering which one should I get if i needed another one (I also don't want to have to take a gimbal around with me )

@kylemartin101 6 лет назад

HERO5 or HERO6 they are both awesome and easy to set up and use. HERO6 is a bit better but also much more expensive.

@christophpeyer4770 6 лет назад

Hey kyle! can you tell us how and where to find copyright free music for our edits?

@kylemartin101 6 лет назад

Check out the RU-vid Audio Library. ru-vid.commusic

@konraditurbe9824 6 лет назад

Its not that hard to implement start/stop timelapse with Arduino, the problem is that it requires Wifi on the GoPro and you know it drains the battery quickly.

@konraditurbe9824 6 лет назад

This is a quick untested proof of concept: gist.github.com/KonradIT/3ae7b68498122f71f49c812400205588 , requires the WiFi module for Arduino as well as WiFi ssid/pass set up

@kylemartin101 6 лет назад

Wow!!! I am impressed. I have some time this weekend I will try to test this code out. I do not have a Wi-Fi module, so I might take me a bit to get it sorted. Thanks for sharing, I may reach out to you in a few days for help.