DIY Pool Cover Build

Подписаться 1,1 тыс.

Просмотров 63 тыс.

50% 1

Using a tarp on my pool hasn't worked well, and my deck is not friendly for a regular pool safety cover, so I decided to build my own!
Used 2x6 boards to span the pool. On one side I added a 2x8 board on end to add slope to the 2x6 joists.
Used old tarp to cover and secured in place by 1x2 strapping.
Ran into some trouble part way through the winter! Check out this important update to the pool cover here: • ALMOST a disaster for ...
Check out my merch store: anothernerdyca...
Consider supporting me on Patreon: / anothernerdycanuck

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@derrickshepherd3472 2 года назад

If you took 6 to 8 6x6 posts and a wench and pulley system . You could raise that in the summer to be a trellis and lower it in the winter for your cover or part of your deck. 👍🏻

@AnotherNerdyCanuck 2 года назад

Oh my goodness! I am trying not to like it, but that is a brilliant idea!! 👏👏💯 I wonder what my wife will say....😎

@michelleherrington5334 Год назад

I am really loving this idea! I am thinking if it was made solid, although I know that would be super heavy, I could have a solid deck over the pool in the winter and use it with our outdoor firepit and some seating then raise it in the summer which would still keep a lot of the sun off the pool. In the winter we could string lights around the 6x6 posts for great ambiance!!!

@AnotherNerdyCanuck Год назад

Another great idea! Someday, someday.....

@Wookiee26 2 года назад

You should just raise one side of the structure , on an angle the water and some snow would run off to the outside wall .

@AnotherNerdyCanuck 2 года назад

The one side is raised by setting it on a 2x8. It's not much, but worked for the first year.

@Yoohoo2949 Год назад

You could make that retractable. Sub in Fence railing for Wood sides. Drill Holes in each end of cross beams. Slide the beams to one end when not in use.

@AnotherNerdyCanuck Год назад

That is an interesting idea. Thanks!

@wudgee Год назад

Really interested in what you did. Our not cheap winter cover was supplied by a pool company. It has holes in a line all along the midline longitudinally. It therefore is rubbish at letting water drain out as the water pools anywhere except at the holes. With rain it sinks. No idea what to do with it. We put long planks similarly to you but much more basic and it just sags where not supported. We have to keep manually draining water in the rain. Going to see if you have another video on this.

@AnotherNerdyCanuck Год назад

Hope you find a good solution!

@timwiegand5622 2 года назад

that looks like major $$$ in wood costs, assuming they are 16ft 2x8s, and need then need the space to store it (even if broken down).

@AnotherNerdyCanuck 2 года назад

Yes. About $700CAN. Bit cheaper than custom pool cover. Stored stacked in my garage beside my car.

@MrHavoc313 2 года назад

you kinda look like the dude that played Hank from breaking bad

@PatrickShubin 10 месяцев назад

I guess thin plywood under the tarp would have helped

@AnotherNerdyCanuck 10 месяцев назад

Yes. But I was trying to minimize cost and material to store during the summer. Been a few years and this is working so far! Thanks for watching!

@lindywebster6513 2 года назад

They make sump pumps for pool cover tops. Maybe look into that. 😊

@AnotherNerdyCanuck 2 года назад

Really? I definitely will! Thanks for the tip!

@kimberlygalegor6324 3 месяца назад

Can you tell me how you secured thr pool lift on your deck? My husband's paralyzed and we just got one.

@AnotherNerdyCanuck 3 месяца назад

I used the "deck mount" option with our chair, and then reinforced the deck joists below with blocking and a 2x12 sub-floor below the regular decking. Hope this helps!

@UGotHookah Год назад

Why can't someone make a for real for a winter cover set of a cheap solar cover just use the actual would recover to roll your cover instead of a solar reel it would be much easier especially if you only have one person to put the cover on does anybody know how I would love a description or tutorial because if you can do it there should be a way since you can do with the solar cover

@AnotherNerdyCanuck Год назад

That would be nice! Thanks for watching!

@kennyg572 Год назад

What happens in summer --u take the whole thing apart?????

@AnotherNerdyCanuck Год назад

Yes! It only takes a couple hours to take it apart and stack in my garage.

@africankingz Месяц назад

Does anyone know the list of materials? I have a 7 months old and I want to do this our pool.

@AnotherNerdyCanuck 27 дней назад

There was a variety of items I used. 2x6x16' long for the cross pieces. 2x8 to lift the one side to create a slope (held on with Simpson Strong Tie brackets). I used 5/4x6 for the end faces on the ends of the 2x6 joists. Hope this helps!

@toddycupp2568 Год назад

That is expensive

@AnotherNerdyCanuck Год назад

Depends what you compare it to. It is a one-time expense and also gives a much better pool opening experience!

@ChefFlee2018 2 года назад

Turn that idea into a sliding deck. 🤷🏽‍♀️keep all year

@AnotherNerdyCanuck 2 года назад

If I had room to slide it somewhere, that would be great!

@fabandyou Год назад

I’m thinking of doing something similar and then “store” it by elevating it in summer - shade for the pool in summer, keep it on ground level in winter as a winter cover.

@AnotherNerdyCanuck Год назад

My concern with doing something like that is that it is so heavy, the contact points on the deck would have a tremendous load. Not sure you could even keep the tarp on because of the wind forces could lift their right up?

@fabandyou Год назад

@@AnotherNerdyCanuck definitely would need to think about the loading and the mechanism to make it go up and down. Instead of having a timber structure, I’m considering using a pergola with adjustable slats for shade/sun as required. Then make it come down in winter or on days with bad weather. Plenty to think about still. :)

@ChefFlee2018 Год назад

Sliding deck would be on a rails someone on RU-vid has one check it out

@ta6531 5 месяцев назад

a little roof??

@AnotherNerdyCanuck 5 месяцев назад

Toying with the idea of making it a raise/lower pergola. Seems like a lot....

@mr.andrade9964 2 года назад

To much work. I never have a problem with just my mesh pool cover.

@AnotherNerdyCanuck 2 года назад

We end up with many feet of snow and rain over the winter. When we used to lay the tarp on the water , the snow/ice would fill the pool and overflow the water from under the tarp and into the skimmer and require significant make up. I agree this is a lot of work, but kept the pool in much better condition, and was way less stress during the winter and less work & hassle opening the pool. For us, overall a net positive! Thanks for your comment!

@sawanruparel 2 года назад

How do you open it when you need the pool ?

@AnotherNerdyCanuck 2 года назад

Once the winter has passed, when I open it in the spring, I will disassemble the cover and store the wood until I winterize it again in the fall. It's a few hours work, but so far it has been working great and doesn't take noticeably longer than filling bags with water, etc. Thanks for watching!