DIY POR 15 - How To Prep Rust Before Applying POR15

Подписаться 112 тыс.

Просмотров 299 тыс.

50% 1

DIY Por 15 Part 1 - How To Prep Rust Before Applying POR 15 using Marine Clean and Metal Ready. Check out POR15 and learn more at amzn.to/42zqPjE For rusted metal, such as the floorboard on this Mustang, there are two options when prepping for POR 15. The first option, I am going to demonstrate in this video. The second option is to have the metal blasted to bare metal.
MARINE CLEAN is a complex mixture of organic & inorganic chemicals. It is non-toxic, biodegradable, water-based, and has no noxious odors or chlorinated solvents. It doesn't contain any petroleum products and has no flash point. Marine Clean represents a revolutionary breakthrough in cleaners, degreasers, and dispersants.
Use MARINE-CLEAN for cleaning and degreasing machinery parts, turbine blades, diesel engines, compressors, transformers, bulkheads, deck plates, and bilge areas; removal of oily deposits found in closed systems such as air conditioning, boiler tubes, compressor lines, heat exchangers, and coils; removal of light distillates, mineral oils, heavy grease, degreasing all metal surfaces, plastics, wood, fiberglass, painted surfaces. Always wear eye protection and rubber gloves when using Marine Clean.
PREP & READY provides the best adhesion for POR-15® on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15®, while simultaneously leaving a zinc phosphate coating to ensure the chemical bonding of paint and steel. Avoid other preps that may leave harmful residues that prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe PREP & READY to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® or any other paint. PREP & READY is not caustic, corrosive, toxic, or flammable
This channel offers step-by-step car and truck #repair training videos for car enthusiasts, DIY, students, or professional technicians. The videos are easy to understand and taught by a Master ASE certified instructor. You will learn how you can get in your garage and work on your car or truck yourself and save money. You will learn about car maintenance, Bondo, auto body repair, how to prep a car for paint, how to paint a car, headlight restoration, washing cars, polishing cars, waxing #cars,, parts installations, and much more.
Check out Custom Shops Wide Range of Auto Paint Supplies at amzn.to/3wdkzSe
Check out Eastwood for a Wide Range of Dent Repair Tools amzn.to/3w1HEY2
#rustrepair
PLAYLISTS
___
Fender Bender Video Series - • Steps To Repair A Car ...
Q&A Video Response - • Q&A - Your Car Repair ...
Donnie and Jess - • 3 Things You Need To K...
Eastwood Video Series - • Eastwood Video Series ...
Custom Paint and Airbrush - • How To Custom Paint an...
Plastic Repair - • Plastic Bumper Repair:...
Rust Patch - • Auto Rust Repair: How ...
Spraying Matte Colors - • How To Prep Aftermarke...
Spray Gun Adjustment - • Spray Gun Parts - Lear...
Masking Tips - • Car Masking Tips - Vid...
OUR MISSION
Our Mission Statement: To inspire and teach others to spend their time productively doing a #hobby that can bring meaning and good memories into their life. This could be to enable an individual with the skills to work on their own car, a father/mother and son/daughter project, or a career in #collision repair.
_
Car Addict Garage-
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacturer. Car Addict Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individual’s talents, knowledge, and skills. Occasionally my videos may This video may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Music
Licenced track: Michael Conn "Dare"
Cuesongs.com

Авто/Мото

Опубликовано:

5 авг 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@samuelspade889 2 года назад

4:40 mark is when this really starts... I would clean and degrease the areas but I would not remove the rust. Por15 needs that to chemically bond. At least that’s what the fine print on my can states.

@Space1Coast 9 лет назад

I've had good results with POR-15 on the frame and cab of my vintage Chevy Truck. He's right about taking the time to remove as much surface rust as possible before using the POR-15 prep products (Marine Cleaner and Metal Prep). Word of caution if you use a dremel tool or pneumatic pencil grinder, etc. with a small wire wheel attachment to get into tight spaces to remove rust use some safety goggles as the fine wire pieces are prone to coming off! I use a pueumatic die grinder with 2" sanding disc and/or a Heavy Wire Wheel with my 4 1/2" angle grinder to remove as much surface rust as possible. Make sure you use gloves, long sleeve shirts, etc. as you'll be wearing the POR-15 for days if you don't get it off your skin immediately!

@mkgg9637 6 лет назад

por 15 website actually states that applying it to rusted surfaces is best. if applied to clean metal por15 may will not adhere as well as it could is my understanding.

@njsongwriter 2 года назад

This is what my auto body guy told me too.

@CarAddictGarage 11 лет назад

I've used other products, but I agree, I am well pleased with the POR15!

@CarAddictGarage 11 лет назад

Thanks for your feedback Thomas.

@jessegallo4351 7 лет назад

A great sander is the Makita GV5010. Most discs are available at home depot but the most aggressive is the 16 grit which you'll need to order online or find somewhere else. I use it on lots of projects, great for sanding your house too.

@warjon63 11 лет назад

POR15 is an excellent product I used it on my Jag front subframe. I am really happy with the results and this stuff is very hard.

@REVNUMANEWBERN 7 лет назад

QUESTION about the etching stuff, How long can you allow the surface treated with the etch to NOT be painted before it begins to rust? If it will.

@ritchiemarsteller8884 5 лет назад

Hi is there something I can buy at home Depot or Lowe's to prep an existing painted surface that I want to put por-15 on. Thank you

@tabaccoal1970 6 лет назад

Por-15 PC Glisten Marine Clear Coat is it OK to use on motorcycle parts such as the tank to fenders and oil tank? Im worried it might not safe near the heat such as the engine my harley soft tail slim s

@REVNUMANEWBERN 6 лет назад

If I use a 32 Oz bottle how much cleaner & how much water do I sue for the correct mix ??

@Sundance5048 11 лет назад

I have a quart of "chassis saver" but have not opened it yet. If I am reading the instructtions correctly, it is not the best choice to use if the surface has been sandblasted. It sounds like POR 15 would be a better choice if it can be applied over sand blasted metal. Donnie, what are your thoughts o this?

@arthurfiorillo8591 5 лет назад

Thank you I have sandblasted the doors and inner of the cab on my 4426b cat, and I was going to use the prep on it now I won't thank you again.

@FoundationElectronics 7 лет назад

great video! on a car of that vintage, I'd take everything out, every bolt, nut, washer, glass, wiring, pedal assembly, running gear, column...everything,,,it's the only way to do a good, proper resto IMO... and the resale value will go up...for there's risks of getting the cleaners, and the por-15 on the components...and it's easier to work with when the parts are removed...

@coolpak1 10 лет назад

Hey I have a Silver 2004 Mazda 3, with alot of rust on the body (mainly around the back wheels) and no holes. Should I use POR-15 to remove the rust on the exterior of the vehicle? and can I sand and paint over the POR? also does the metal prep remove rust streaks, where there is no rust corrosion?

@CarAddictGarage 11 лет назад

I agree, this is hard to get off.....anything!

@CarAddictGarage 10 лет назад

I would try to remove as much of the rust off first, then you could use the POR 15 products. Once dry, you should be able to sand and paint over it. In fact, you need to for UV protection.

@arthurfiorillo8591 5 лет назад

I have done a lot of Por I get all the loose rust off wash with muriatic acid spray on top of the acid with scrubbing bubbles use a scrub brush wash with backing soda flush with the hose I just did the floor in my cat 426b came out great. remember spray the scrubbing bubbing over the acid keep wet I got no fumes or smells the paint and rust just fell off try it on a piece of scrap.

@thegitago7823 9 лет назад

You said 1/1 would be good for the marine cleaner, and that even 1p cleaner and 3p water would be fine for most jobs.. but instead you went three times stronger than recommended?

@mattsvintageshop2925 Год назад

would it be ok to to use gas MiG welder to fill in tiny rust holes ??? the metal would be free rust and cleaned up first.

@nhly8190 9 лет назад

Thank you this was very helpfull

@Jonno2summit 7 лет назад

POR-15 is the best product I've ever used on a chassis. Some negative comments on here are from those who did something wrong and wouldn't have gotten good results no matter what product they were using. Not sure what they did, and hope they figured it out since then.

@savageclassics 6 лет назад

It's forward slash. Good video.

@trouts4444 3 года назад

Excellent video.

@Sundance5048 11 лет назад

Maybe a better question is to confirm: POR15 can be used directly over sandblasted metal. It does not require surface rust to make it a stable product, correct?

@orlandonostagiafever1964 6 лет назад

thanks for the info great I will use it.

@mriley4955 7 лет назад

Why do you have music playing so loud when you are speaking?

@tomchristopher71 11 лет назад

I use an electric DA that I bought at Home Depot. I think it is RIGID brand and does the job without a compressor. I have an air compressor but since I work outside on my old semi, the electric is easier than dragging out the compressor. Works great for DIY.

@sundown798 10 лет назад

Use 300 grit on the POR 15 when cured. Its very smooth when dry. Clean again. Use POR tie coat primer. Then you can paint as normal. Cheers,

@CarAddictGarage 11 лет назад

I have heard of them, but I have never used their products. (If there are others that have used Matrix, please help me answer this question)

@MrBrycesmom 7 лет назад

DIY Auto Body and Paint .

@Theycallmesoap0 10 лет назад

how long would this take one fairly capable person? I'm thinking of doing the frame and tub of my wrangler

@CarAddictGarage 10 лет назад

Theycallmesoap0 That is really hard to say. Depends on how bad of shape it's in. I would set aside a day or two for each step, but I am not sure.

@CarAddictGarage 11 лет назад

Yes, POR 15 works well on sandblasted metal. Removing the rust by sandblasting is the best method. This will assure all traces of rust is gone!

@outgoingcare 2 года назад

It will not. Rust creates pores in the steel, sandblasting will close some of these pores. The rust grows in that cave. It will come out later. Regardless of the cover. Chemically stop the rust first.

@boroneadani 8 лет назад

love your videos - thanks!

@CarAddictGarage 8 лет назад

+boroneadani Thanks for watching

@rays.2480 3 года назад

I have a truck, and it has a lot of pinholes in the floor pan.. i was going to replace the floor covering. with new, but i wan't to fix the pinholes 1st.. I can do the top side fine. but how do you guys suggest applying this stuff on the underside ? the POR 15 Looks just like Miracle Paint, Consistency is very watery like. Brush painting it on seems like it might get quite messy.

@CarAddictGarage 3 года назад

Yes, it can get messy and it is hard to clean up. I would lay some plastic down and brush the underside to reduce the overspray. It flows out nice after brushing. You will want to wear a respirator even though you are brushing it on.

@1uptospeed 10 лет назад

thanks donnie for the info! mustang lookin good.

@CarAddictGarage 10 лет назад

Thanks for watching!

@bodytech882 9 лет назад

DIY How To Paint A Car School Keep in mind this product has a window time for painting.This product is a copy from a company out of Germany called wurth. Ive used both wurth is a better product.Ive used wurth for twenty five years trust me its better.

@danielholtxxl4936 6 лет назад

Shouldn't it be called DPOR? (Don't Paint Over Rust). Just sayin'.

@vm722 2 года назад

POR 15 is awesome 👌 Get it on your fingers. About a week before it is completely gone. Amazing Doesn't even come off if you soak it inside er

@CarAddictGarage 2 года назад

Very True!

@martinlandaverde403 4 года назад

Good info👍

@xtr3mezer0 10 лет назад

does it HAVE to be on bare metal for it to bond 100%? I have a truck I want to use POR15 on the frame but I don't have the tools to sand it to bare metal, I can only use a wire brush and get rid of the surface rust. It has existing undercoating on it.

@pbaylis1 6 лет назад

Go for the Eastwood rust product range. No need to go to such massive lengths as this POR-15 seems to require. Just descale, then encapsulate. No need to hose down the interior of your car.

@targabill 5 лет назад

POR site very clearly says it will not stick to previous coatings.. Have to remove all previous coating of any kind but your video a lot of coating not removed???? ???? ???

@stevejames671 7 лет назад

Hi and thanks for all the great tips. I'm restoring an old motorcycle tank and took the advice of several other guys who suggested I throw a few nuts and bolts into the tank to dislodge some of the more stubborn rust before beginning the POR-15 process. Unfortunately, one of them is now stuck inside the tank - and I do mean stuck. I've tried beating on the tank with a rubber mallet, I even set it on the barbecue grill to expand the metal, tried to pry it loose with a straightened-out clothes hanger, even used a super strong magnet. Nothing worked. Ok, I've accepted that it is now a permanent part of the tank, but my question for you is, will this negatively affect the integrity of the sealer? One other thing; is Metal Prep non-caustic enough not to ruin my fiberglass bath tub OR my marriage when I rinse it out with warm water? Thanks. Steve

@CarAddictGarage 7 лет назад

I am not sure about using Metal Prep on fiberglass. It does not say anything about fiberglass on the technical data sheet. Are you wanting to soak parts in it? The only problem I can see with the bolt is the sealer may not cover the area its covering.

@stevejames671 7 лет назад

No, I was planning on rinsing the metal prep stage of POR15 with warm water as recommended (in my fiberglass bathtub). Just wanted to check to see if fiberglass is sensitive to this rinse procedure. My wife would kill me if I ruined the tub.

@rustyjeep2469 3 года назад

@@stevejames671 I wouldn’t do that. The Metal Prep contains acid. Whether or not it’s safe for the tub I would not use it in a tub you bathe in. It smells bad when it’s working also. I’d use it in a garage or outside, not indoors.

@farmerchuck3 7 лет назад

what parts of the motor can you put the POR 15 on.

@CarAddictGarage 7 лет назад

I am not 100% sure, but you could probably do most of the motor. It may not hold on headers. Thanks for watching.

@juanespinoza5753 9 лет назад

Have you heard of that snake skin product? I heard it's better then por15.

@kevinsawyer9000 10 лет назад

At 5:18 you said you went with a 4 to 1 ratio which you said was 4 parts marine clean with 1 part water. I assume you meant 4 parts water to 1 part marine clean.

@CarAddictGarage 10 лет назад

I didn't realize that I said that. I think it is 4 parts water and one part marine clean.

@caseykerr7914 6 лет назад

Go Pirates!!

@dan1381 7 лет назад

Anybody know how much you need to do a small truck frame, cleaner degreaser, prep, and POR 15

@Jonno2summit 7 лет назад

A quart of paint should be enough, along with the size of bottles he used in the vid for the other products. I use POR-15 solvent/reducer and don't cut corners by using lacquer thinner (except for clean up). I've never used the other metal prep stuff. I use vinegar or muriatic acid to etch metal and remove light rust. It's a lot cheaper. Home Depot or Lowes carries that. But acid like that has to be neutralized liberally with baking soda water then rinsed with a hose or power-washed. A hot summer day is best for this as everything has to dry completely, including under brackets and things like that. Winter bad.

@Jonno2summit 7 лет назад

Yes. It's very important to neutralize any acid used. Otherwise it will sit there and do the same job as salt, or just contaminate the surface for paint to stick. Just last weekend I used muriatic acid to clean my main fuel line on my '72 240Z as it was getting clogged. The acid really cleaned out what was in there. Then I flushed it with plain water and then let baking soda water sit in the line overnight. Then flushed with plain water from a garden hose, then 125psi air, then denatured alcohol, then air again. Acid is a great tool, but it has to be treated with respect.

@Jonno2summit 7 лет назад

try 4WD dot comm. Don't waste the effort with Rustoleum. It's a good product but it's not lacquer. Lacquer is a unique type of paint that is not porous and will block water, unlike polyurethane types.

@CHixon 5 лет назад

I have an excellent air supply but still personally prefer to use electric hand tools.

@TomsChevelle 9 лет назад

I would suggest visiting the Eastwood . com web site.. they have a new rust encapsulator and even an aerosol with a hose attachment to get INSIDE frames. The Eastwood rust encapsulator is even better than the POR.

@josephpuchel6497 10 месяцев назад

I agree

@davidhyland3833 6 лет назад

should have a better respirator on when sanding paint and metal...

@welcometoreality3450 3 года назад

vacuum better have a hepa filter or they are blowing all that crap around the air to breathe ugh

@jimmike1171 4 года назад

Very good advice except you didn't apply the POR 15 in the video.

@douglas9607 Год назад

Great stuff. Thank you. sub/likie

@ElMilusosenelgabacho 11 лет назад

Just watch your hands por-15 is hard to take off I get some in my fingers and take like a week to get off

@Markpianist1 5 лет назад

You said 4 parts degreaser to one part water but you meant 4 parts water to one part degreaser. That's what the directions recommend.

@welcometoreality3450 3 года назад

directions on marine clean dont say anything about leaving it on for 20 mins either. i assume it would be ok tho idk

@TallStarlite 9 лет назад

Don't get any oil on that freshly painted Por-15 cuz it will just blister and peel right off.. Better of using a Rhino liner type of material.

@cmscms123456 4 года назад

NOTHING lasts forever... and most people only keep their collector project car a few years. But, also true is, RUST NEEDS OXYGEN to survive. Deprive bare steel/iron of oxygen and you have a pretty good head start against rust... When working on a car and you spot some rust, rough it off with a steel wire brush and paint over it... Primer sealer, or black gloss, you will defeat they rust pretty well 90% or more.

@ceaserthemighty 2 месяца назад

I hate to be that guy, but the instructions say to use four parts of water to one part degreaser

@MichaelOnFire 7 лет назад

Pouring water on bare metal? Is this guy for real?

@BU1Robertson 7 лет назад

You have to wash the stuff off. We garden hosed everything clean in our shop. Just have to be smart and dry the metal. Plus the POR-15 loves rust.

@trouts4444 3 года назад

Water causing rust takes time which can be fast in developing a surface coat of rust. If you dry the metal after with a towel as he did or air gun no rust will form.

@rustyjeep2469 3 года назад

You should forced air dry it after unless it’s hot enough to just air dry. You need to rinse the acid etch metal prep product off somehow.

@welcometoreality3450 3 года назад

@@trouts4444 i would use shop air or just let it air dry by itself....cloth may have chemicals, clothes washer detergent etc...