How to Apply POR 15 to Eliminate Rust Forever!

Подписаться 79 тыс.

Просмотров 625 тыс.

50% 1

Rust repair and and corrosion prevention are necessary steps to restore a classic vehicle. Tool Dude Tony shows you how to permanently stop rust using the three-step process and chemicals from POR 15.
Please share it with your friends and follow me on Twitter - #!/tooldudetony
Tool Dude Tony's Disclaimer:
Due to factors beyond the control of ToolDudeTony, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ToolDudeTony assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ToolDudeTony recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ToolDudeTony, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ToolDudeTony.
This is another episode in the '57 Studebaker Silver Hawk Restoration Project. Here is a link to the playlist of all my videos in this series: • Classic Car Restoratio...

Авто/Мото

Опубликовано:

10 ноя 2012

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@tooldudetony 11 лет назад

Once you open a can of POR-15, it starts to cure. It doesn't matter if you put the lid on it, it will cure on you. That's why I bought the 6-pack of the little cans. I figured I could use up the small cans and not have to worry about any waste.

@nobodyspecial313 4 года назад

Used black POR-15 on a set of steel wheels for the winter tires on my car. The stuff is expensive, but runs very thin and gets into any cracks and crevices. After it dried, it's important to cover it with a generic paint (I used rustoleum spray paint) to protect it from UV. My rust removal wasn't perfect, but the POR-15/rustoleum combination has held up very well to Michigan winters compared to plain painted wheels.

@260878mlmp 11 лет назад

Super nice video :-) I tryed POR 15 some years ago on my vw vento. There was some rust in the panel on the drivers side and after using POR15 with the prep that it needed, and after that it just stoped rusting. It really worked.

@jdwisdom9433 9 лет назад

That was a quick, totally instructive, and entertaining demonstration. Thumbs up!

@gordan07 11 лет назад

Great video tony! I'm looking to adding por 15 to some surface rust to my car and this helps a ton! Tanks

@timr6935 9 лет назад

Well made video, edited and content put together very quick and to the point. Thanks keep em' coming!

@moonblink 9 лет назад

Man! You're fun to watch. I'm going to watch more of your videos now.

@abelincoln1863 11 лет назад

Dude! Just get the loose rust! I did a truck frame & other parts! It was made for the ship industry. Clean & prep is important! And folks need to make sure they get paint over any exposed metal as POR 15 is not UV resistant. The metal is coated but the paint will fade & chalk up. Good job, Dude.

@carlosburlar9167 9 лет назад

Great video I have a sailboat that I just bought and need to fair the steel keel.... POR 15 is also recommended as fist steps before epoxy .... I think I will go this route

@ger320 11 лет назад

Learned so much from this video. Thanks. I like your upbeat presentation.

@ger320 11 лет назад

Learned so much from this video. Thank you and i like your upbeat presentation!

@tooldudetony 11 лет назад

Hey Red, doing the underside of floor panel and inside of the fender is the perfect us of POR15. Spraying on the prep chemicals will be a pain and so will painting on the POR15, but it's worth it on a classic or a car you want to keep. Use POR15's chassis black - This is a coating to go over the corrosion protection to protect it from UV - which is about the only thing that will damage it. Wear long sleeves and a respirator. You don't want any of that crap in your lungs. Good luck.

@VEKSTco 10 лет назад

Nice project, do either of the prep products affect the existing paint?

@tooldudetony 11 лет назад

Others are telling me the same thing. This was my first attempt at welding. Thanks for the tip -- about the tip. :)

@tooldudetony 11 лет назад

Yes, I will most likely next summer. However, I'm not using POR 15 on the surface of the body. I'm using it in places that you can't see that tend to rust out like inner fenders and the chassis. I'm going to use an epoxy primer with corrosion inhibitors on the painted part of the body. Thanks

@outcast7899 4 года назад

Great vidio TDT, but if I flap disc sand and spray product on will it lay on smooth , and who was your guitar music by Thanks

@Blackwater369 9 лет назад

Nice video. Just placed an order for this stuff.

@MrMrsregor 8 лет назад

good video! i wish you would have shown what one 4oz. can covered

@tooldudetony 11 лет назад

@Sleek - I tried. Any used trunk lids I could find had serious rust issues. There are no new lids being made for these.

@cindyjones6918 11 лет назад

Nice work. Keep it up, Looking very good.

@jay_Pare 8 лет назад

Thanks for this awesome video @Tool_Dude_Tony. However, I thought I could use this remove the rust on my Civic and then pain on it but apparently paint is not sticking really well on this stuff. Could you recommend me something after I wire all the rust on my car? What primer will prevent rust and will let me sand it so I can shoot over it without getting a crappy paint job? or even better, could you do a video showing how you would do and which products you would use? :) Regards!

@tooldudetony 11 лет назад

Hey celli351, POR15 has coatings that go over this rustproofing layer like chassis black and they have some primers too. But this is mainly for the chassis and inside stuff that you typically don't paint. What are you wanting to do?

@MikeSparksTn 11 лет назад

Thank you Tony, excellent video. What program do you use if you dont mind asking? Im about to use POR 15 on a motorcycle tank, any suggestions?

@STANTHEMANLEED 9 лет назад

So once the POR15 is on how do you re-skin the panel?

@tooldudetony 11 лет назад

The Metal Prep product is a zinc phosphate treatment. You're suppose to use that before you apply the POR-15

@KeeleDesign 10 лет назад

I bet that quarter pane smells great! subscribed love it man

@BillR1951 9 лет назад

Good video. Please tell me where I can get the four can package? Thanks.

@tooldudetony 11 лет назад

Hey Mike, I use Apple's iMovie on a Mac to edit my videos. On the POR-15, they have a special formula that is specifically made to coat the insides of gas tanks. I haven't tried it, but saw a demo on Powerblock. It looks like good stuff. I'd use it. Good luck.

@McElhinney65 9 лет назад

Good video Tony, I'm at that point now where I'm contemplating what products to use on my chassis floor. I have traditionally used phosphoric acid based converters then zinc rich primer. Your video is quite persuasive.

@pspuria81 7 лет назад

i want to ask the person who did the video has there been any rust reappearing on that old car?

@flyurway 9 лет назад

Nice job on the video!

@doug4bears 10 лет назад

Good video bud......I found rust on my 1999 ford ranger along the top drip area of the drivers door......wondering how I could tackle this project myself......

@redhongkong 11 лет назад

how about car's under body floor panel and inner side of fender ? i wanna do some rust removal and apply some rust prevention coating on them . but i think it might be difficult to spray those grease remover and converter chemical.

@1954fengshui 9 лет назад

great advice thanks.

@MrSpeedysChannel 10 лет назад

Good video!!!Thanks!!

@TheFred1952 8 лет назад

Great video

@JAKEWJONES 11 лет назад

lol... I love this guys use of curse words. Especially 04:54 when he says don't "dick around" lol

@ksjdaniel 11 лет назад

Hi, Are making a video for painting the car after por15 prep work? I need to rust treat my car before painting it, and a video for that would be very helpful.

@martinda49 6 лет назад

great video

@Vandebilt 9 лет назад

was there any problem paint over the cured POR-15?

@isawul00k 11 лет назад

thanks tooldude.

@celli351 11 лет назад

Should you spray primer on the POR while its still tacky so paint will stick?

@TheChrismanis1791 9 лет назад

I decided to compare some products as well as por-15. Some obviously were better than others but i used The jelly to remove most rust then cleaner and etcher and actually found some stuff made by rustoleum that is pretty good not as good as the por15 but for someone on a limited budget stuff was pretty awesome and actually the finish almost looked the same.

@nicetna2010 10 лет назад

Are you going to do the undercarriage and frame? Just curious. If so could you post the vid? Thx and good job!

@tomchristopher71 11 лет назад

Try a product called OSPHO. It is a metal etching rust prep and works great for the price.

@kevinmanzitto3074 7 лет назад

I see you're in the Beef State. I have antique plates identical to yours. I'm in Omaha.

@davejohnson3376 10 лет назад

Nice video, thanks. Is Por15 weld through?

@tooldudetony 10 лет назад

No, it's not. I'm not coating the parts where they will be welded together. I bought some SEM weld through primer for those places.

@loupelez1551 10 лет назад

Some guys put a big screw in the side of the can. Others use saran wrap between the lid. Myself I buy new empty cans from the hardware store and transfer unused product with a funnel. Also store in the fridge for even longer use. :D Cheers,

@josaljo1 9 лет назад

So how does that rust look now after 3 years?

@RobsPackanShine 11 лет назад

subscribed.....good stuff

@jeffryblackmon4846 6 лет назад

Did those products kill the grass?

@lukeanker 9 лет назад

Did it kill your grass when you sprayed it there? It did for me...

@tharobstervideo 7 лет назад

top video

@coleolson3405 10 лет назад

How far did that six pack of POR 15 go? Did it cover everything you needed it to?

@rustynails113 11 лет назад

I love your car.

@dobb673 8 лет назад

What do you do about the pitting?

@harrycrotch9574 8 лет назад

+dobb673 bondo

@1Batt 11 лет назад

So this is not a phosphate treatment or?

@REVNUMANEWBERN 6 лет назад

If I use a 32 Oz bottle how much cleaner & how much water do I use for the correct mix ?? REPLY

@james.black981 8 лет назад

Glad to see somebody else doesn't mind an S bomb when working on cars. well done bud.

@tommyboat64 8 лет назад

If you like SWEARING and foul language and BODY WORK... go to PISSERS Channel HACK 'N PACK on You Tube. A loose lipped UpState New Yorker with a Chicago accent who is kinda funny too...

@chefron8 10 лет назад

Try Chassis Saver by Magnetic Paints. A lot less fussy to work with and hardens tough and flexible.

@MrSpankymcghee 10 лет назад

No prep needed with Blackstar Rust Converter other than knocking off any loose debris. Starts working in 20 minutes and turns black which can then be painted or just left black. No more rust - EVER!

@errhka 6 лет назад

Don't rinse off the rust chemical treatment - let it dry or wipe it off with a towel. Not because of environmental reasons (phosphoric acid should be fine in the small amounts that it is rinsed off in) but because any remaining water will collect and could encourage rusting even after you've covered it.

@sonny2435 6 лет назад

a 57 Studebaker ? I am speechless; you seem bright , (:>0 ?

@acedean7198 9 лет назад

am i the only one who pronounces it "poor 15" instead of pee-oh-are 15

@tommyboat64 8 лет назад

right...it looks like POUR FIFTEEN to me too... what does the P.O.R. stand for. OH, put on rust.... catchy...

@pir869 8 лет назад

i used it on my triumph spitfire,i didnt use marine clean,i did steam clean and etch the metal, i had to strip a coat of acrylic BRG paint off to use the OEW 2k paint i want to use,the por15 did not key an comes off in sheets,ok i shouldve used marine clean,but, this paint is super tough to key with wet n dry,on big flat surfaces it isnt too bad ,takes real effort to de-shine for keying,on the underside,where the stuff is really needed,moulded pressed shaped steel is so hard to do it's a nightmare,you just cant key all the nooks n crannies,i love the tough resistant coating,but its so hard to get it right,unless you can rough up all the por15 use zinc on convolluted surfaces,and use marine clean or you will be able to remove A4 size sheets later on. i live in scotland and need a coating to beat the damp dreary weather rusting away my baby. best of luck.

@tommyboat64 8 лет назад

Can you build a garage or a large shed or small barn to keep your Auto? I lived in Upstate New York and we have a similar or WORSE climate to Scotland. The answer to keeping an Auto for many years? A covered garage and preferrably a HEATED one. Taking your Auto OUT of the elements is most important. Leave it outside, and its fate is sealed and it will rust away. Most people in USA have large heated Garages with boxes of JUNK stored inside, and their baby - Auto - is parked OUTSIDE in the driveway and in the elements.

@pir869 8 лет назад

our garage used to house my spitfire,now it's a junk store ,none of it mine,carcoon is the closest to a climate controled enviroment here,but neeeds to be indoors,so liberal amounts of dinotrol and a breathable cover.winning the lottery would help.

@tommyboat64 8 лет назад

Put important things under your bed, in narrow /shallow boxes. In the Garage, you could build shelving up to the ceiling. Then, string a hammock netting between the shelves as a type of suspended floor above the Auto. You can place on the net some light weight items that take up space. Then, with a little bit of cleaning, you can park your sweet Spitfire underneath! /----\

@Godzillah 8 лет назад

por15 came in white as well

@dariens007 9 лет назад

i dont get it, why does it need rust protector? rust is bad so grind it off and then paint? paint is cosmetic but protects the metal? so why do you need other chemicals to do that if you do a proper paint job?

@harrycrotch9574 8 лет назад

+dariens007 por15 is better all the way around. its thicker then paint and wont chip off from rocks. and its a life saver for rusty vehicles. stops rust dead in its tracks and converts it rusty thin metal to a strongger state with the metal etch prep. this stuff is what to use its better then primer and paint any day of the week. just make sure you top coat it.

@LIGERSFAN32 10 лет назад

i donno why but "it isn't coming off" really maid me laugh.. how would this stuff work on a underbelly you reckon? would need to be done with a gun then tho..

@mojavedude250 10 лет назад

por 15 metal ready's active ingredient is phosphoric acid, also found in pepsi and coke

@tooldudetony 10 лет назад

You can clean corrosion off of batteries with Coke and Pepsi too. I don't drink it any more.

@PowderMonkey4Life 9 лет назад

Tool Dude Tony Use a baking soda/ water mix to neutralize battery acid, soda or other acids

@dannstark5924 10 лет назад

Until this I thought I knew a lot

@javedfazil6686 8 лет назад

the por15 I am familiar with is black.

@brianpeniuk6202 8 лет назад

+Javed faziljaved Pretty sure they make it in a few different basic colors.

@tonykari5124 6 лет назад

Nice video. ... so that 4oz did the whole car ? Goes a long way huh

@hitchcock1960 8 лет назад

What the hell! Where are the sleeves?

@kevinsawyer9000 11 лет назад

I bet the marine clean smells great when using a fabreze bottle to apply it. HA HA .

@jwgmail 11 лет назад

yeah i was going to comment on the liberal use of cursing. good stuff : )

@aninjamnky 9 лет назад

"some nasty chemicals....gotta wear some gloves.." watch me spray this outside in the yard......

@sleekcartim 11 лет назад

days of work on a trunk lid, or buy another one hmmm

@miracle03 8 лет назад

i would not have done it on grass

@MyJustOpinion 10 лет назад

I feel very bad seeing you spraying those chemicals on a grass. those toxic will seep down the soil.

@clark2002jc 10 лет назад

Marine clean is actually safe to pour right down the drain if you needed too. Its strong but it neutralizes quick when it contacts water or calcium.

@PowderMonkey4Life 9 лет назад

Then you really must be bummed w/ all the depleted uranium weapons the military has used. To the point of ruining the genetic code of the Iraqi's. A lil phosphoric acid, etc gets neutralized or broken down pretty quick & is relatively naturally occurring too. Phosphoric acid turns into phosphate which is used by the plants, it's the P in NPK.

@ferrariowner123 9 лет назад

Mike Anderson Where do you suggest it should be done? I'm going to do this some time, and i don't want to ruin my driveway, or really hurt the environment, any suggestions? Its the floor pans, and there are still installed in the car, i can drain them into the factory holes, but what to do with it then? And i'm fairly sure that one of those chemicals is water based, i think its the prep stuff. So its the marine that's the real issue, or at-least the worse of the two.

@flyurway 9 лет назад

Mike Anderson Some people really need to learn how not to be so damn anal about EVERY little thing!