DIY Powerful Ultra Bass Amplifier ATX Computer , Simple Circuit , No IC 

DIY Powerful Ultra Bass Amplifier TDA2030 , new design , up to 160 watts

It is fake. He soldered everywhere with copper wires but he didn’t cut off the original line that already on the circuit board 😂

dont try at home, its a fake, is just a power suplly not an amp

6000 watt🤣🤣🤣

Fake!!!!, why? If you will verify the schematics of an ATX psu you have to desolder bipolar transistors or mosfet for you to reuse as class D amplifier...FAKE

More click bait I see. What's next, a 1 million watt amp setup?.

It's fake, he may be kept an original amplifier circuit inside the ATX power supply......

If it's indian of course it's fake

So now you know how to do it, don't do it.

And this is why we need thumbs down back.

First of all. This PSU is generic and its really a literal fire hazard. Also opening a PSU is very very dangerous and can kill you so be careful.

Great amplifier with two watts and 20% THD!

Super fácil sobre todo para los que no saben nada de electrónica muy bien explicado quede fascinado con tanto que hablo.

que alguien le diga que explique como pasa la corriente a traves del puente rectificador ya que el altavoz lo conecta a la entrada de 230VCA

Dont take this the wrong way, but its much easier to just clip the green wire and a black wire on the ATX 24 pin connector, tie them together to trigger the psu on, then use yellow and black wires to a car amplifier since all yellow are running under 12 volts. You can then take an aux to rca and plug into an amplifier for much higher power.

قد يصنع المحتوي الفارق وانا من عشاق الأفكار الجميله احسنت

Главное физику по сильнее запутать, и пока она со всем этим разбирается, чудо технологии работают

6:37

Исправь пожалуйста картинку названия! Этот усилитель дает не 6000W, а 6000kW, а может и больше. Там же питание целых 12V!!!

Ждём видео на 1 гигаватт.от 1.5 вольтовой батарейки