No video :(

DIY PS4 Elite Controller - ExtremeRate PS4 DAWN PS4 Controller Remap Kit Installation Guide

Подписаться 40 тыс.

Просмотров 205 тыс.

50% 1

Update 2:
For stock question: the requirement of the PS4 Dawn remap kit is out of our expectation, they always ran out of stock even when they were on their way to Amazon warehouse. So if you need it urgently, then when you see they can be "add to cart" on Amazon, please add and finish the order. We are sorry for this problem, and we are producing more stock now to meet the demand. (2019.05.02)
Update:
We got some questions on the soldering process. In 03:25 and 04:13 when install the flex cable (or we say brown cable, ribbon cable, FPC ribbon..), we noted "if you don't want to remap TP button, you don't need to soldering in this step", this means you still have to attach the flex cable and then get it connected with the remap board (the green board).
In 06:25, we noted "if you don't want to remap L3/R3 buttons, please cut off L3/R3 wires and skip this to next step", you can still keep the L3/R3 wires, just cover the contact point at the end of the wires with the electrical tape to avoid short circuit.
------------------------------------------------------------
Why pay $100+ on a PS4 Elite controller? Do it yourself!
Here we show you how to make a PS4 ELITE controller with ExtremRate DAWN remap kit and your existing PS4 game pad.
Purchase link:
Amazon US: amzn.to/3VYlBJK
Amazon CA: amzn.to/3Y5PKZe
Amazon MX: amzn.to/3P3OwK5
Amazon DE: amzn.to/3UwSSdK
Amazon UK: amzn.to/3HkpW5J
Amazon FR: amzn.to/3P48rIQ
Amazon IT: amzn.to/3VTTP0O
Amazon ES: amzn.to/3iJOJFY
Amazon AU: amzn.to/3BhhXmh
Amazon JP: amzn.to/3P8IlEl
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3Y0b0jd
eBay: ebay.to/3UDElNv

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,6 тыс.

@jordansutche9829 4 года назад

Motor controls electrician here. Just bought and installed the Dawn and I love it. Quick couple of notes that should be added to the description. Almost any soldering tool will work. I have a 25W one and it reaches 600°F easy. I use a 60/40 lead free solder, .75mm thick (0.05"), and if your solder is a rosin compound you don't need flux, but it can't hurt either.

@REJR90 6 месяцев назад

Do you have to use the touch sensor or can I just rip it and use the button method

@yetanotherbassdude 4 года назад

Just installed one and it works great! The soldering is very fiddly to get right so take your time preparing and follow this video as closely as you can, being sure to apply as little heat and solder as you possibly can using a nice, thin iron tip so you don't cook the board. It's definitely not as easy as just buying a Scuf, but I'm really happy with how mine turned out and really glad I don't have to pay $150+ to get something like this. Now I've just got to relearn my games with all these extra buttons!

@ExtremeRate 4 года назад

Thank you!!

@rickgarcia7377 5 лет назад

can you make a video without the soldering process? I think i speak for others when I say im a bit confused when you say to just skip it because I dont understand how the controller will communicate with the back buttons without the solder. My understanding is I wont need the brown cable and the two extra wires on the remap board.

@ExtremeRate 5 лет назад

Skip all the soldering process means you just don't need to solder, but all the other process have to be done, included the brown cable (flex cable) have to be attached. The brown cable is for the communication between the controller and the remap board.

@ExtremeRate 5 лет назад

@larryconti23 Yes you still need to place the FPC on the board

@elbowsyoutub 5 лет назад

@@ExtremeRate So, in all cases you have to solder the FPC board as you have done at 04:33 ? Thanks

@ExtremeRate 5 лет назад

@@elbowsyoutub In case you want the touchpad button can be remapped, you need to solder in this step, otherwise you don't need to solder. But you still need to place the flex cable on the mainboard as the video shown, you can use a double side tape to make it stay (as 03:40 shown)

@mp2863 5 лет назад

@@elbowsyoutub that step is to allow the touchpad to be remapped. a solderless installation is possible but you wont be able to remap r3 l3 and touchpad. the ribbon will be kept in place with the double sided tape and the plastic inserts that will lock it to the board.

@nvmleo 4 года назад

I bout it 1 week ago and I just installed it today. Without any knowledge of how to solder I got it done in under 45 mins. I like it so far 👍🏿

@ExtremeRate 4 года назад

Cool!

@naqisuhaimi6428 4 года назад

Do you need solder it if you dont need the L3 and R3 button

@392BJ 4 года назад

Naqi Suhaimi no i think of you want to remap touchpad, L3 & R3 you will need to do soldering but i didn’t need the wires so i cut them off.

@Deermir385 5 лет назад

I just installed this, it did take some time to actually get everything closed again. Just take your time with this mod and it will be a breeze. This video was a helpful reference as well.

@imafiretruck7454 5 лет назад

Agreed. As long as you err on the side of the remapper's components rather than the dualshock, then you're gonna have a damn fine "pro elite" playstation controller at a fraction of the cost. I've been searching for an opportunity to do this for a good year or so now, and no one has come anywhere close to realizing this task like extremerate has with this kit. They f@#$in' nailed it. I feel like they're trollin' hard, tho, with the selection they launched with, tho. At least they scrambled and got the kit in this video out in the wild finally, but why it wasn't available with the other 4 from the start is beyond all reasonable logic except trolling.

@FrankOcean-- 5 лет назад

Just wondering, does it work still? Is it responsive or does it have some kind of delay? Thank you for answering, if you ever will

@tarinmconie9771 5 лет назад

Have you had any issues like input delay?

@mmrm7777 4 года назад

my controller does not fit back in

@bordel6121 2 года назад

Bought it in 2019 to play Rocket League. Real easy to install and still works like a charm.

@Dragonsauce1995 2 года назад

So happy to see a recent comment. So those buttons hold up and click well all this time and use later?

@karimharat7899 2 года назад

@@Dragonsauce1995 absolutely. I play multiple hours every week and am still 100% satisfied

@Dragonsauce1995 2 года назад

@@karimharat7899 thanks for an answer Karim. I just ordered one express shipping and am extremely excited to get it for Doom.

@jumpingtuners 4 года назад

bought it, installed it, and i freaking LOVE IT

@somethinggreat916 4 года назад

what games do you play with it

@CrownCKB 4 года назад

This is better than the new back button attachment as long as you can handle the setup. Might not have as many features as a scuf (Trigger stops), but I really can see this lasting longer. The quality is great and they use 4 large click buttons. The click pressure is right where you would want it. You even get 2 spares click buttons in-case you ever have problems and 4 extra back button face caps. You can even remap with touch! Mine is perfect, literally. All for the grand price of $35. (+ Low optional Faceplate price too) I recommend it fully. Thank you guys!

@ExtremeRate 4 года назад

Thanks for your review!!! :D

@vinceb8270 5 лет назад

This is a great kit. The only issue is that no one places their fingers where the buttons go. If you were to redesign the placement of these buttons, so many more people would buy them

@ExtremeRate 5 лет назад

Thanks for your suggestion!

@nolanjohnson195 5 лет назад

I think the buttons are placed perfectly for me!

@ExtremeRate 5 лет назад

@@nolanjohnson195 that's cool ;)

@jethropike1964 2 года назад

to make soldering easier I lined up the cable by putting 2 toothpicks in the holes

@mozzybjones 4 года назад

Im making an alteration to my shell so that i can use this with cut out holes next to the clickers for elite paddles

@ExtremeRate 4 года назад

Awesome!!

@LUCKYREPAIRS 5 лет назад

Bought this like 3 months ago barely got around to installing it since my real scuf is acting up. This works EXACTLY the same, LOVE IT!

@ExtremeRate 5 лет назад

Thanks for your feedback!!!

@aRMFC3110ca 4 года назад

Lucky how does it feel in the hand ? Is it comfortable?

@tenjy784 5 лет назад

I built it in my controller and need to say its amazing. You need to be careful and exact but its not really difficult to install the remap kit. One complain I have is, that the paddles could have been placed better but its okay like this. In summary you can built a good and cheap programable scuf controller with it 👌🏻

@FrankOcean-- 5 лет назад

I'm wondering, does it still work and is it responsive or does it have some kind of delay?

@tenjy784 5 лет назад

@@FrankOcean-- its has no delay and still works like on day one

@FrankOcean-- 5 лет назад

@@tenjy784 thanks dude, I was thinking about getting one and I think I might do it

@tenjy784 5 лет назад

@@FrankOcean-- no Problem :)

@i7vSa7vi7y 2 года назад

Great product. I haven't bought it yet but I used to install my own buttons on PS3 you can see on my profile. This is a great kit and would take me so much less time. Great product guys.

@cincouno3314 5 лет назад

When will these be back in stock it still says unavailable on amazon??

@ExtremeRate 5 лет назад

The stock ran out even when they just entering Amazon warehouse. Next batch of stock will available in about 5 to 7 days, please add to cart once you found it can be add, sorry for the inconvenience.

@merlyndezinger8972 5 лет назад

I just bought it on Amazon so its back

@wintrr1634 4 года назад

Jeme I just bou one

@purplevip 5 лет назад

I cant remap any buttons, when i try to the light doesn't flicker blue. is there anything you can do to help?

@generalsinn5388 4 года назад

I'm SO glad I did this. I do electronics work for a living so the installation was easy. The full color instructions were amazing but seemed out of sequence. Worked as advertised! I just wish I had gotten the Green back piece rather than red, but I use a silicone slip cover to bulk up the controller a little...(big hands) I had to modify the slip cover to accommodate the buttons. I do have an issue when I lay my controller on my lap it will activate the touch sensor and go into remap mode, I just have to remember to set it on the table instead. 💯% satisfied. Although..the ability to remap the options button to the rear would be great. With big hands, come big fingers..PUBG I hit the map more than my inventory.

@ExtremeRate 4 года назад

Thank you so much for your comment!!

@mp2863 5 лет назад

just installed it today, works pretty well except my finger sometimes activates the touch remap button. will probabaly open it up again and uninstall the touch sensor sticker thingy and just use the button combo for remapping. a pretty awesome solution to get back buttons while still maintaining the solid feel of the official ps controllers. ive tried a scuff before and i definitely enjoy this result more than scuffs

@ExtremeRate 5 лет назад

Thank you!

@mp2863 5 лет назад

@@ExtremeRate no problem, great product! ill try to answer any question i can on here.

@MrSam3335 5 лет назад

Hi i came here looking for an answer you might have. I have the same problem as you. Did you just cut the heat sensor wire? And does it still work?

@mp2863 5 лет назад

@@MrSam3335 havent tried it yet but it'll most likely work. it was also suggested by the extremerate account in a reply below.

@SoonersNiners16 4 года назад

I just got mine in! I’ve been a good boy all day long, took family out to the beach and now heading home for the night.... can’t wait to get home and get started!!! Does anyone know what’s the BEST map for COD Modern Warfare! (So I can at least keep up with my 14 year old.... what buttons to map 🤷🏻‍♂️)

@PuddleGalleon 4 года назад

I would suggest remapping jump, melee & crouch, then you have one spare that you could use for reload or ping (or whatever you find useful). If you haven't soldered I think you may not be able to remap both melee and crouch as I believe all the COD presets have one of those as R3 - I haven't tested that but will check this week.

@PuddleGalleon 4 года назад

I checked... I use the default preset with X (jump) mapped to K4 and O (crouch) mapped to K2. This makes slide cancelling, drop shots and jumping while shooting quite easy. K1 and K3 I don't have anything but it could make sense to map ping and reload to these.

@francescoluzzi2519 4 года назад

@@PuddleGalleon Hi! So do you think there is no need of soldering if you just map X and O to K2 and K4? In this command setting you would melee with R3 right?

@PuddleGalleon 4 года назад

@@francescoluzzi2519 Hi! Yes, that's exactly what I do. I think it would be ideal to solder but I'm quite happy using R3 for Melee. I found that only K2 and K4 are comfortable for me to use anyway. You could maybe try without soldering first. Good luck! See you in the gulag!

@francescoluzzi2519 4 года назад

@@PuddleGalleon ahah thanks, see you hopping in the gulag!

@SebasOver 3 года назад

Everything works great, it’s actually really easy and unless you literally place the flex really bad, everything works great However, I’d recommend a new design for the back shell since the back buttons are too close from each other and feels uncomfortable for other kind of players, you can only press one at the time on each side only with you middle finger, you could try to separate them a little more to have a more natural feeling and to be able to press the buttons not only with your middle finger but also with you ring finger, this way players could use 4 fingers (if they want) to press each button individually and at the same time. In competitive games like Fortnite it’s important to react fast and be able to do different things in order, quickly and almost immediately or even at the same time. For those wondering, this kit does not affect input lag in your controller and the back buttons are really responsive, before installation my controller input delay was of 0.5ms (measured with DS4 Windows) and after I installed the remap kit was the same (0.5ms), and after 2 weeks of playing I didn’t feel any delay playing, every action happens as how it should be On the other hand, as I said, everything is great, the back buttons feels really premium

@ExtremeRate 3 года назад

Thanks for your feedback! For the 4 back buttons layout, we are going to launch a new kit this week, this new kit allows you to click the back buttons at the same time with your middle and ring fingers!

@SebasOver 3 года назад

@@ExtremeRate yea I just saw the image you posted the other day, I’m really excited! Can’t wait to buy it

@ExtremeRate 3 года назад

@@SebasOver Thank you! :D

@CraigsChannel 3 года назад

I've just finished off the video for the v3 kit, it'll suit people who want 4 buttons and a little bigger control pad like the Xbox. Personally I'll only ever use 2 buttons but my friends use 4, I guess everybody is different :-)

@SebasOver 3 года назад

@@CraigsChannel yea, it depends on what game you are playing and your playstyle

@Datcatspejamas 4 года назад

I bought this and I’m excited for it to come it, do you know if I can use this still with my strike pack to get 6 buttons? I have been using the strike pack before I came across this product and it would be amazing if they worked together

@mjoe8365 4 года назад

ExtremeRate commented 10 months ago here saying that that tested it and they are not compatible together.

@BlamingBuddha 3 года назад

Idk how the strikepack would even fit over the controller anymore lol. I have the ps back button and the strikepack though so if there's some way it fits I could test it I guess haha

@therealbiggiecheese7034 4 года назад

I think its probably best to just cut the touch foil off and use the button combo because I've read reviews where the foil will go off mid game because the controller heats up or the foil is on their lap

@ExtremeRate 4 года назад

Yes especially for big hands

@mike5480 4 года назад

thx for the remap info :) helped me out on the card itself it wasnt that clear.

@ExtremeRate 3 года назад

You are welcome

@chuckbee4619 3 года назад

I bought the decade and love it. A favorite feature is the accent rings. I think anyone into fps gets the unusual wear in the shell from left joystick. And problem solved being able to change them before replacing controller. I think if you could add that option to the dawn it would be great feature. Either way still great product!

@ExtremeRate 3 года назад

Thanks for your feedback and suggestion!

@women.respector2350 3 года назад

Can you install one for me and I’ll just pay you 😭 im desperate

@chuckbee4619 3 года назад

Check out hex gaming it is extremerate co. Or affiliate. You can get fully assembled kit there. They provide PS brand controller so you don't have to use yours. If you do that I rec the clicky hair triggers that way you have a back up for racing games etc.

@6double6. 5 лет назад

Can you please just make a quick simple video on how to install this all without soldering???

@m33299 4 года назад

6DOUBLE6 this is video. can you not read it said skip the parts of soldering if u don’t need it

@im_nyx5340 5 лет назад

I did everything right but the touch pad is on the wrong side

@ExtremeRate 5 лет назад

What do you mean on the wrong side?

@im_nyx5340 5 лет назад

@@ExtremeRate I got confused sry

@anubis6994 5 лет назад

Where can I buy it? I live in Spain and they have finished, will they bring more?

@ExtremeRate 5 лет назад

Yes they will

@TattooSilence 4 года назад

2020 noch gekauft klappt alles perfekt hatte Angst das ich das nicht schaffe aber jeder der ein wenig Geschick hat Schaft das und wenn nicht sind auch nur 30€ für das Kit und 30-40€ für eine gebrauchten Controller alles zusammen 60-70€ für eine DIY scuf das ist mal eine Ansage ist einfach ein Upgrade das jeder haben sollte danke nochmal aus Österreich 🇦🇹

@ExtremeRate 4 года назад

Vielen Dank für Ihre Bewertung! Gern geschehen !!! :)

@hypercapsular9330 4 года назад

Will this work with a temperature of 200c to 450c?

@Gavin207 4 года назад

Hyper Capsular did you try or what did you do?

@lulmendes6983 4 года назад

are the paddles actually very responsive? cause I own 2 scufs both paddles stopped working after 3 months so I switched to the sony paddle that you can add in the back of the controller but they're not very responsive as I'm too quick pressing the back buttons even tho I didn't have any problems with the scuf, so I was wondering if these paddles were responsive like the scuf paddles

@ExtremeRate 4 года назад

As we test, this kit works like scuf :)

@lulmendes6983 4 года назад

@@ExtremeRate thank you

@ExtremeRate 4 года назад

@@lulmendes6983 You are welcome

@SebasOver 3 года назад

It’s really responsive and It doesn’t affect input lag :) I tested it

@ExtremeRate 3 года назад

@@SebasOver ;)

@nayel4744 4 года назад

If anyone is looking into buying this, Big Disclaimer: I bought it and returned it because it has ghosting on the back buttons which means you can only press one of the back buttons at a time, for example if you jump with one and lets say build with another in fortnite only one will register even if you press both, it's really annoying!

@ExtremeRate 4 года назад

Did you played on PC?

@ShatterinSpider 4 года назад

I've experienced nothing like this on mine. I can activate multiple buttons at the same time. It could be with the way you installed it or something faulty with maybe the flux cable or the remap chip. I even used it on not only pc but on mobile too where it works great with no problems for myself

@ExtremeRate 4 года назад

@@ShatterinSpider I think the problem is on the PC or its USB port. We have a customer tried to install 2 kits on 2 controllers and test on the same laptop, he has the same issue.

@ShatterinSpider 4 года назад

@@ExtremeRate ah ok, hopefully it's not maybe model specific and the root of the problem is fixed.

@darnelllorenz8492 Год назад

⁠@@ExtremeRate is this still an issue on pc ? Just ordered one it’s essential for me to press 2 of the buttons at the same time.

@Enfenit 5 лет назад

Super easy to comprehend, love the concept, works great!

@ExtremeRate 5 лет назад

thanks for your support!!

@FPSABE1 5 лет назад

I can't wait till this product is back in stock in amazon canada. It was on there once, and it disappeared. :(

@ExtremeRate 5 лет назад

Sorry, the stock go to Canada in June

@FPSABE1 5 лет назад

@@ExtremeRate Thank you for the reply. I am looking forward in trying the product sometime in june. :)

@suley3029 3 года назад

I’ve been trying to figure this out for hours. It was working fine and then the controller stopped connecting to my ps4. I think the ribbon cable broke, any way you guys can help?

@ExtremeRate 3 года назад

Do you mean the white ribbon cable?

@suley3029 3 года назад

@@ExtremeRate no, the brownish one that connects the controller to the unit

@suley3029 3 года назад

I had to take the unit out and revert back to the normal controller function and it works fine, I’m not sure if I did a step wrong but whatever renders the connection to the buttons (d pad, x, triangle, circle, square) doesn’t work. The analog sticks and options buttons work fine however

@ExtremeRate 3 года назад

@@suley3029 You have to make sure the connection points of the brownish flex was aligned with everything correctly. Please let us know your order number via email to info@extremerate.com with your shipping address and RU-vid name, we will send the replacement of the brownish flex for you to try again.

@E10playz 5 лет назад

Can you please do another video on this but with no soldiering please

@RaptorSucc 5 лет назад

You actually don't need to solder it unless you're remapping the touchpad.

@nluu111 5 лет назад

Raptor Succ so how do you get to brown cable to stay there? Double sided tape?

@ireland5040 3 года назад

@@nluu111 im having the same problem

@iixRix 4 года назад

Hey What is the benefit of R3 / L3 wire? What I will not get if I cut the wire and do not connect it

@ireland5040 3 года назад

You just cant remap pressing r3 and l3 to anything

@rustyl.holdren3681 4 года назад

This is an easy product to install an works great. Best 30 bucks I have spent. I need the scuff like Advantage without having scuff money.... An if you dont want to use L3, R3, an center map buttons, this kit is just plug an play. An thats perfect for me... Another nice feature is if you top analogs wear out, well just buy another controller an swap out bottoms. Easy, simple an works great. 10 out of 10 stars is my rating. The best part is once you get these buttons programed how you want them you wont have to take your thumbs off the analogs sticks. Major advantage when it comes to shooter games. Well I hope my review helps you decide where your going to spend your money. I ordered mine off amazon an it was at my house in 3 days with free deliver. Happy hunting folks an I hope you have a good wonderful day

@rustyl.holdren3681 4 года назад

Also my controller was a jdm 050 an worked great to it. Make sure your controller is compatible before purchasing.

@ExtremeRate 4 года назад

@@rustyl.holdren3681 Thanks for your review!! And we are happy to know that :D And JDM 040, 050, 055 are compatible :)

@Evo4726 2 года назад

I’ve done multiple back buttons DIY for my ps5 controllers from extreme rate but for some reason on the PS4 controller my controller won’t even turn on I’ll plug it into my charging port and the light comes up but when I try the ps button nothing happens … can someone help me with this issue. ?

@Manuel-yk3fi 4 года назад

Great product

@ExtremeRate 4 года назад

Thank you!!

@igamefornoreason9165 4 года назад

Is there a version for the controller without the light bar

@ExtremeRate 4 года назад

No it does not

@LuCKER125 3 года назад

Got mine around 2 months ago from Amazon, I love it, the design makes it really easy to use the back buttons. Sadly my paint already started to go off on the top below the charging port, I got the white version, and now have a small brown line were the paint was. Would be awesome if you could improve the paint somehow. Controller was not heavy used btw Keep the good work

@ExtremeRate 3 года назад

Thanks for your feedback! We coated the soft-touch paint over the shell, and when the base color is a light shade like white, it will easy to got dirt. We keep improving this paint, we will try our best to find a solution to sort out this matter in the future. Thank you!

@LuCKER125 3 года назад

Thanks a lot for the great work and keep going! I always use your products when modding Controllers and always recommend them to customers. Best regards

@ExtremeRate 3 года назад

@@LuCKER125 Thank you!!! If you have any further suggestions for our products, please let us know!!

@grantkuchnicki7753 4 года назад

My controller works fine and switches into remap mode but doesn’t let me remap the back buttons does anyone know how to fix this?

@ExtremeRate 4 года назад

Please try to re-arrange the wires inside of the controller, if the kit got short circuit, the K switches will be affected.

@mxtiilation 4 года назад

I don't know if I should buy this as me and anyone who lives with me aren't amazing with stuff like this does anyone think it's easy to set up ?

@CraigsChannel 4 года назад

Yeah easy enough, I bought one a few days ago, was going to make a video for my channel but totally forgot. If I buy another at some point I'll make a fresh video

@ExtremeRate 4 года назад

If you have the point we can offer free kit for you to make the video :D

@mxtiilation 4 года назад

@@ExtremeRate ?

@mxtiilation 4 года назад

@@ExtremeRate did you mean Craig ? Oh I thought uwere giving me a free kit lol :(

@ExtremeRate 4 года назад

@@mxtiilation Yes I mean Craig, I forward his channel to our marketing team and they said good :)

@rickgarcia7377 5 лет назад

I believe you guys would get alot more sales if you make a video showing the installation without soldering. Im on the fence about getting this because I dont have a soldering iron. I know in the vid it says to skip the soldering but its a bit confusing.

@ExtremeRate 5 лет назад

Thanks for your suggestion, but in our last reply, is it clear enough? If yes, we will repeat it on the description of the video.

@rickgarcia7377 5 лет назад

@@ExtremeRate Yes it was clear enough. My understanding is all I will need is the tape to hold the cable in place. Thanks for the reply I will be picking one up my next paycheck. Thank you

@ExtremeRate 5 лет назад

@@rickgarcia7377 That's cool, we will update the description in the video, thanks again for your advise.

@jjloco7121 5 лет назад

@@ExtremeRate plss make a video without soldering. .

@SirJones357 4 года назад

I really want to unassign my R3 click as I accidentally push it down while trying to suddenly turn in a fire fight.. is it possible to assign it to a back button and unassign it's original right stick click so the click would not be functional anymore??

@ExtremeRate 4 года назад

No..

@OrganizedGrimeFilms 4 года назад

@sirjones357 use the ps4 menu. Go to settings, accessibility and button assignments. Assign R3 to a different button. I use right on the dpad but you might choose a different button depending on the game. Then you can map a back button to whatever button you selected and now the back button will be R3

@ExtremeRate 4 года назад

@@OrganizedGrimeFilms WOW! Cool!!!

@bontex5737 4 года назад

Bought It and installed ist so nice I'm so much better in call of duty now!! :D thank you for producing that !!

@ExtremeRate 4 года назад

Congrats and you are most welcome!!! :D

@melchorsegismundo3396 5 лет назад

Just bought a kit... hope I can install it without any problem!

@ExtremeRate 5 лет назад

Thanks! Please follow the instruction for installation. If you have any problem, please contact us and we will sort out for you.

@leonhakker4874 4 года назад

i installed it and it worked fine but i kept entering remap mode so i cut the thinfoil off with a bit of the wirre than it started blinking in and out of remap mode so i solderd it of completely its still going in and out of remap mode what should i do??

@ExtremeRate 4 года назад

Do you mean you cut off the touch sensing foil with its wire completely?

@leonhakker4874 4 года назад

@@ExtremeRate in the end yes but i first cut the thinfoil of with half of its wire. Now the thinfoil is solderd of with the whole wire and its blinking in and out of remap mode.

@ExtremeRate 4 года назад

@@leonhakker4874 Please let us know your order number via email to service@gamingcobra.com with your shipping address and RU-vid name. We will send you the replacement of the PCB. And in your next installation, please cut off the foil with its wire (do not solder it off)

@FuriousJagen 7 месяцев назад

I've just installed this mod on my Dualshock 4, and I'm having two issues with it. First, I'm seeing the issue that others have seen where my controller randomly enters remap mode, but the troubleshooting steps on your FAQ didn't work for me. I tried cutting off the touch sensor, covering its lead on the PCB in electrical tape, and even removing the solder from the lead, and the controller still does this. Second (and less major), the LED on the back does not light up when the controller is in remap mode. It does when I make or cancel a mapping to a back button, but the LED then turns off instead of staying on. As such, I have no way of knowing at a glance if I'm in remapping mode or not. Do you have any other troubleshooting steps I could try?

@abdelkader533 5 лет назад

I heard from my friends it is nice but when i got it i needed to sent it away again i got crap what was used already and some parts where missing

@rileynickols5591 5 лет назад

I did this exact process and the controller works great but the light bar won’t turn on and the controller won’t charge

@rileynickols5591 5 лет назад

Anyone have any idea how to fix it?

@rileynickols5591 5 лет назад

I fixed it and it turns out my ribbon cable was plugged in wrong because the cable can be plugged in both ways

@ExtremeRate 5 лет назад

@@rileynickols5591 good to hear that!

@Pslyse 4 года назад

Not sure why anyone would remap l3 or r3 when the point of having back buttons is that you don't have to take your thumbs off the sticks

@ExtremeRate 4 года назад

May be, like in FPS game you have to hold L3 to run so your left thumb will be tired

@Pslyse 4 года назад

@@ExtremeRate I suppose so, but most of the time l3 acts as a toggle so in most cases it's not necessary, it's not as if I don't think there should be the option to do so, but I don't think it's worth the risk you run by soldering

@ExtremeRate 4 года назад

@@Pslyse Yep. But solder this part is easy enough if you have the soldering iron :)

@Pumpkinhead2400 5 лет назад

Just bought a few of these kits to try out. Any chance you guys will be restocking the NES themed joycon shells in the next week or 2? Fingers crossed for an option to buy without backplate

@ExtremeRate 5 лет назад

Good news is we are going to add the joycon shells with NES and SNES theme, with out console backplate. Bad News is stock may hopefully arrive after 3 weeks.

@Pumpkinhead2400 5 лет назад

ExtremeRate ok, thank you for the response! Love your products, can’t wait to post a review video! imgur.com/gallery/YKVSCtC

@Pumpkinhead2400 5 лет назад

ExtremeRate also I was wondering if you could provide any info on how you guys achieve the soft touch finishes on the shells? What kind of paint/coating process do you guys put these under to have them come out so nice?

@ExtremeRate 5 лет назад

@@Pumpkinhead2400 Cool!

@ExtremeRate 5 лет назад

@@Pumpkinhead2400 There is a kind of paint oil named "soft touch" paint oil or "rubberized" paint oil

@jakube1735 Год назад

I just wish mounting the main board was easier, the LED is very difficult to align and I feel like one of my other mods (non extremerate) are colliding with this mod.

@entimide4615 5 лет назад

Everything is working correctly except when i map o to K2 it maps L2 to K2 instead, any suggestions?

@anudewilliams4788 4 года назад

I have the same problem. all buttons work except of K2. as soon I want to map it the led goes out and it's constantly switching between L2 and R2. What should I do?

@anthonythefishkeeper5461 4 года назад

So if I want to keep the touchpad were it is I don’t need to solder? But I still have to obviously attach the other but I am just trying to get an idea because my birthday is 10 days away and I want to buy it for my self I just don’t know how to like leave the touch pad where it is

@ExtremeRate 4 года назад

If you don't need the touchpad button to be mapped to the back buttons, you just skip the soldering process, but all the other components still need to install

@rocklee6565 4 года назад

Thank you for this! Definitely helped me out a lot!

@ExtremeRate 4 года назад

You are most welcome!!!

@igamefornoreason9165 4 года назад

I Bought a whole new controller and it was worth it thanks I might do a gameplay video on cod warzone

@ExtremeRate 4 года назад

Thank you! :)

@spyder2114 4 года назад

Hey what's up, how many of you have tried the remapping part? Where you have to solder it? did it work or do we see them and it's professionally done. but anybody else out there doing it? Good looking mod

@ExtremeRate 4 года назад

Thousands of gamer tried :) If you don't need the L3 R3 and touch pad button mapped, you don't need to solder.

@spyder2114 4 года назад

@@ExtremeRate Cool product. I'm good at soldiering. I might give it try. I own multiple custom controllers... but I like to make one myself. Thanks.

@ExtremeRate 4 года назад

@@spyder2114 Thanks, do it yourself!! :D

@vault1230 4 года назад

@@ExtremeRate ExtremeRate, I have found one on eBay and I was wondering, for an average shooter like CoD what would be the best programmable buttons for it. I do not want to blow money on a solderer and because of the Coronavirus situation I cannot go to my schools soldering machine for coursework. I am 13 btw and I have modded lots of things like replacing shells, modding your LED kit on my controller etc.

@ExtremeRate 4 года назад

@@vault1230 Hi, if you don't need the L3 R3 and touchpad button to be mapped, then you don't need the soldering. But our this remap kit can only work with our Gen 2 LED kit(DTFS www.amazon.co.uk/dp/B07YW76YXL/). And honestly there are no the best settings for the back buttons, it depends on how you practice and your finger memory, but you still can find some idea on youtube or google, like this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-N3r6bXP0ke0.html

@jumpingtuners 4 года назад

my advice is just solder the damn thing its way easier than it looks and youll have full functionallity i did however moved the touch sensor up a bit to the middle of the controller . under the board because i had a few accidental remap mode activations in between matches. my overall rating is a 9 on scale 10 and the only 1 minus point is that there is so much choice in colors for the back i just couldnt decide so i went for carbon

@ExtremeRate 4 года назад

Thank you! :D

@kvmods 4 года назад

i have done this mod. it feels solid only the right buttons are easy accidently pushed :D But overall good work!

@ExtremeRate 4 года назад

Yea the controller is just a bit too narrow for 4 back buttons :)

@waj9774 5 лет назад

Hi. I was in the middle of installation but the brown ribbon cable has slightly torn from the middle. I’m trying to repair this with electrical tape. I just want to know if there are any spare ribbon cables that can be sent to me or what would be the best advice to fix this. Thanks

@MrSam3335 5 лет назад

I think youll be better emailing them, their customer service is amazing a quick to respond.

@Chr15Payne 4 года назад

Installed this earlier today, works just as expected and I'm happy for it. My one issue is it will go into remap mode due to the normal resting position for my finger being where the touch sensor was installed. Is it ok to just cut it if I'm fine with entering remap mode via the button combination?

@ExtremeRate 4 года назад

Yes, just cut the touch sensing foil with its wire!

@martinsolis4907 4 года назад

ExtremeRate I only have one button responding and no led from the controller what did I do wrong?

@ExtremeRate 4 года назад

@@martinsolis4907 Please try to re-install the orange flex to make the connection points of it align with the controller flex correctly.

@aphaseelec 3 года назад

What is the button combination, this half answered a question as I'm doing the exact same thing.

@Chr15Payne 3 года назад

@@aphaseelec 16:28 All 4 shoulder buttons + ↓ + X

@hamadayash3364 4 года назад

I’ve done same as the video shown the controller was working but some buttons was not working i try to remove the orange cable and put it back it works normally but when i put the orange cable most buttons doesn’t work i dont know why .. even though i put double side tape but same issue ..!

@hamadayash3364 4 года назад

I think its from the ribbon cable it’s damaged where i can get a replacement for it?

@ExtremeRate 4 года назад

@@hamadayash3364 Please make sure the contact point of the yellow ribbon was aligned with the FPC of the controller correctly. If the problem still exist, please tell us your order number via email to service@gamingcobra.com with your address, we will send you the replacement, thank you.

@ExtremeRate 4 года назад

Please make sure the double side tape was not cover any contact points between the controller PCB board and the FPC

@Shh_._. Год назад

My order didn’t come with the cover for hk2, hence I can’t even test to see if it works.

@nope3257 4 года назад

Could I have the DTSF 2.0 led kit and the remap kit on one PS4 controller and I don’t understand how is there any chance of a video for multiple kits on one controller ? Please

@ExtremeRate 4 года назад

Yes please stay tuned!

@tigerbite9750 4 года назад

I have a very important question about your soldering. What kind of solder wire materia do you guys used? There's many different solder wire on the market. PS's dev recommend 60-40 watt but I want the best quality solder wire and not some cheap solder quality that isn't reliable. I know you guys are third party but please tell me what you guys recommend if I want to buy this DIY product for my L3 & R3 remapping. 🙏🙏🙏 Please, I need more info how effective it is.

@ExtremeRate 4 года назад

Sorry we are not professional with the solder wire. But we heard that KESTER is good.

@clay4513 Год назад

I bought the ModKit from amazon. The installation was very easy, but the programming mode keeps coming back when I play, even though I'm not on the sensor with my finger. please help...!? it's quite annoying when playing…

@Omar-so4eg 4 года назад

So if i don’t solder I won’t be able to change the paddles to a button of my choice please answer.

@ExtremeRate 4 года назад

If you don't solder, only L3 R3 and touchpad button can not be mapped to the paddles but the other 12 buttons can be mapped.

@josh___3846 4 года назад

I love this. and will probably buy the kit soon. Do you also make extra long thumb sticks? Not extensions but actual replacements that you could swap in while doing this mod?

@ExtremeRate 4 года назад

Thank you. Not at the moment, we are working on elite thumbsticks which similar to the xbox one elite controller.

@josh___3846 4 года назад

@@ExtremeRate I have a scuf and i hate that pos, its broken so many times. the only thing i like about is having a tall thumb stick on one side. Im realy intrigued by your product and getting a long stick too would be icing on the cake. Edit: just bought this product. cant wait to try it this weekend!

@ExtremeRate 4 года назад

@@josh___3846 Thank you! And please subscribe to us we will post the thumbstick kit once available!

@user-bw5so6rq1b 8 месяцев назад

I bought this and the clicky kit, it has not arrived yet. Is there anything I should know before installing both? Like in which order should I install the kits?

@wesperitiochannel2309 11 месяцев назад

so.. i only need double tape to make it work, for the entire button except touchpad and R3/L3??

@imdavidmalcolmilovemymom2134 5 лет назад

So if u dont solder then L3 and R3 when clicked would be useless like clicking L3 to sprint?

@ExtremeRate 5 лет назад

If you don't solder L3 R3, the L3 R3 could not be mapped to the back buttons, but you still can use the exisiting L3 R3 to sprint

@imdavidmalcolmilovemymom2134 5 лет назад

@@ExtremeRate Thank you

@paullusty 5 лет назад

i was working on something very similar to this. well i guess i dont have to put any work into it now. this is 100x better lol

@ExtremeRate 5 лет назад

You should try it, and you may say wow ;) We look forward to hearing your feedback here

@paullusty 5 лет назад

@@ExtremeRate haha i was gonna make it for a friend, i play claw. only thing i would like you improve on is the quality of the plastic, i have the splatter grip, if it isnt soft touch it can be a little slippery. other than that it seems awesome!

@ExtremeRate 5 лет назад

@@paullusty Thanks for your advise bro! I have a sweaty hands too, so we will try to find out a better material to help.

@imafiretruck7454 5 лет назад

I have the carbon fiber kit from launch, and have installed a variety of extremeRate's assortment of front shell's, and the first thing i noticed when I started assembling was the Soft-Touch material. Like... All I can say, is they nailed it here. It's crowded af as far as the guts in the ds4, which can quickly become frustrating, w/o question, but the end result is an actual dualshock controller with 4 remappable switches for each one of your birds. So good.

@GrayLepax 5 лет назад

I have a problem with your kit. As soon as I plug the FPC Cable into the PCB chip board the controller presses all buttons (except for the buttons it can't remap) by itself and I can't do anything. In the moment I unplug it the controller works perfectly fine again.

@TheDaylos 3 года назад

hello, I don't know if you have been asked this question. I have completely assembled my controller and when it comes to its operation there are keys that do not work, for example right now I have the R1, R2 and square that do not work. I have reopened the controller and repositioned the flex cable in case it was making mass but now the buttons that do not work are L1, L2 and any button (X, square, O and triangle). Can you help me?

@ExtremeRate 3 года назад

It still the problem from the orange flex. Please re-align it again and after that please fix the screw on the controller mainboard firm enough. If the problem stands still, please contact our customer service via email at info@extremerate.com and we will send another orange flex for you to install again. Thanks.

@MegaSpikeProductions Год назад

It has just came in the post today, it seemed simple enough to install it all and I did so without fail and without a soldering kit, it wasn't till I turned it on some of my buttons on my controller don't work (I figured when trying to set it up). I used glue to stick the orange plastic to the board, has that got anything to do with it or is there a specific reason why some of my buttons don't work, did I put it together incorrectly?

@iggyt.8776 4 года назад

I just order a kit, and I'm so excited to play Apex.

@ExtremeRate 4 года назад

You will be the legend with it! :D

@ExtremeRate 4 года назад

@Alexander Mikosz Thank you very much!!! :D

@alexnomercy8781 3 месяца назад

Is it possible to install mouse click buttons with this kit? ( triggers bumpers d pud and xyab?

@RedBaronisa 2 года назад

Question: Can i not just drill holes in my current back plate? Is there a fundamental difference between the backplates other than the holes? Ok, i see now. Made it to that part of the video where i see the screw posts u added that arent present in standard ps4 controller backplates.

@devinsmaldore8763 2 года назад

i've been using this kit for awhile now. one question i have: is there a way to make the paddles more responsive? i have k2 mapped to R2 and sometimetimes pushing k2 does not register everytime... please help!

@scouse1967 4 года назад

I bought this kit for my sons PS4 controller and. Yes his controllers PCB is compatible for this kit and it has the light bar on the top of the controller also. Took my time in fitting it and followed the included instructions that came with the kit. Put his controller back together once everything was installed and it DIDN'T work. Granted i could see the tiny LED light, light up blue but when my son went to remap his controller buttons, there was the problem. Both my son and i tried everything to get his buttons remapped and nothing would solve the issue. Oh and the small clip on buttons that push into the toggle switches kept dropping out. Ended up sending the kit backto get a refund. Not impressed at all.

@ExtremeRate 4 года назад

We are sorry to know that

@JAKOB1977 5 лет назад

Kudos for the video.. dont have a PS4 only an Xbox X so not relevant for moir, but it is a huge plus with such a video in DIY stuff..

@ExtremeRate 5 лет назад

Xbox One version is coming, stay tuned!

@victoryisHis Год назад

lol the gold thing on the pcb came on the opposite side for some reason and I can't get it to be on the bottom...

@xd-qo1nu 2 года назад

will any double sided tape work or is there a specific kind that needs to be used? there is one like scotch tape at walmart that costs 1 dollar but I'm not sure if its applicable for this. thanks 😅

@fado856 5 лет назад

Why can't my controller turn on?

@mannypadilla4802 5 лет назад

Fado ganinduto did u even plug the batter pack back in 😂.You may have to go back and recheck that you have the connections connect.

@fado856 5 лет назад

Manny Padilla 😂 i did, it’s on now but it won’t charge 🤦‍♂️

@Dubb1429 7 месяцев назад

Do I need the solder thing I already bought mine and didn’t know you needed it… is it required in order to use it

@imy6191 5 лет назад

Could you recommend a soldering iron to buy that is relevant to this video? It would be really helpful as i dont know what soldering equipment to purchase.

@ExtremeRate 5 лет назад

This one is similar with ours www.amazon.com/dp/B06XTP25PS

@Poncheezy 5 лет назад

I can't decide between this or a strike pack. I'd like to be able to have rapid fire along with remapping buttons but you only get 2 paddles with the strike pack. When ever you decide to add rapid fire to this it would be pretty much perfect for me.

@ExtremeRate 5 лет назад

Sorry we don't have plan on rapid fire

@mp2863 5 лет назад

i have the strike pack sitting on my shelf right now, didnt like the paddle placements and having to go wired was pretty annoying. i would definitely recommend this over the strike pack.

@SubtleHustle72 4 года назад

It sure would be wonderful if you guys had different back buttons to choose from! I’ve detached all the gray buttons and just put small pieces of electrical tape over the interior yellow buttons and it works beautifully. Other than that the kit is absolutely excellent. I did one for myself and one for a buddy. Well done extremerate!

@ExtremeRate 4 года назад

Thank you!! We will think about it!! Maybe round buttons for option!!

@DrVirus3-0 5 месяцев назад

One question when u soulder the point for the touchpad does the solder touch the edge of the button?

@michaelbaseggio11 5 лет назад

I installed it and that's great but my R1 and R2 aren't working or working without pressing it can u guys help me?

@mattgaston4523 5 лет назад

Bruh I installed it completely correct and only one of the triggers worked and my x and square button stopped working this isn't worth the purchase and time just get a scuff

@michaelbaseggio11 5 лет назад

@@mattgaston4523 i get a scuf and the backpaddle was trash and get broken like after 3 weeks using it btw i fixed this kit just try disinstall it clean all the components of controller change the silicon of triggers and reinstall it

@ExtremeRate 5 лет назад

@@michaelbaseggio11 Hello, sorry for late respond because we have time difference. So do you mean you've resolve the problem now?

@Bill_Brasky 5 лет назад

What are you guys doing inside these controllers? Lol Just install the kit and get out, it's pretty easy

@Cozme909 4 года назад

help i didnt soldier mine and the remap is working but my l2 isnt responding. i tried to re aligned the ribbon but it didnt work then i tried to remove the cable to check if the controller is the problem and after removing it my controller was working like it should and i notice my led blue indacator light isnt that bright unlike on your vidoe and other youtuber tutorial

@errorx999 4 года назад

After the installation do you have to do the whole remap button assignment or can you just do that ingame? Like when youre in the games controller configuration settings can you just click the back buttons and those are recognized by the game? Or do you need to do the remap?

@ExtremeRate 4 года назад

You have to enter the remap setting mode to assign the buttons you want to map to any back buttons.

@codycody6619 4 года назад

I built the controller all the way without soldering and my controller wont turn on but if I pull the cable that goes to the remapping board out it works

@ExtremeRate 4 года назад

Do you mean when you disconnect the orange FPC cable with the remap board (but the FPC still stays in the controller), the controller works?

@EYEGAIN 5 лет назад

I did this and my controller doesn’t fully function like I’ll press right dpad and it does nothing help

@jonesymeow9487 2 года назад

What thickness of bouble sided tape for the FPC cable (@3:40) this seems like an important piece of info I cant find with you guys

@jake2663 4 года назад

I accidentally pinched one of the wires that control one of the vibrators so it kept vibrating luckily the wire had minimal damage and I just moved it aside and everything's fine now. Review: I was honestly worried nothing would work while I was reassembling but everything seems to be working fine I was able to program the buttons. First impression great mod now I just need to get used to actually using the buttons. Lol

@ExtremeRate 4 года назад

Thanks for your review!!! :D

@joshuabrathwaite2774 4 года назад

I literally followed the written directions to the detail, minus the R3/L3 option. Even had this video up to pause and see exactly how visually in motion. The blue indicator lights up but the remapping is not accepting the changes. I don't know what I did wrong. Disappointing

@ExtremeRate 4 года назад

Please don't worry, we will assist you to resolve the problem. When you map a button to a back button, is the LED flashed in blue?

@joshuabrathwaite2774 4 года назад

@@ExtremeRate I ended up taking the whole thing apart again and reassemble the components. This time it worked and the blue lights flashed. Now it is working. Thanks for replying. I appreciate this.

@ExtremeRate 4 года назад

@@joshuabrathwaite2774 That's GREAT!!! :D