DIY PS4 Controller Back Buttons & Trigger Stop - eXtremeRate DAWN 2.0 Remap Kit Installation Guide 

I just finished modding my controller with this kit. The video was very helpful and made an easy and straightforward assembly. Great kit!

ONE WORD.... "WOW"!!!!! Just installed this and now i can finally put my Astro C40 controller to rest. RIP ASTROC40. I have spent more than 1thousand dollars on that awfull controller in the last year :( them analog sticks just dont last as long as the ps4 analogs! Thank you for this product!

Ive installed it, it's pretty gnarly and comfortable

Thank you very much for the simple explanation! I have managed to build my own PS4 controller with your product, I am very happy with how it works, I would probably buy again :)

In this video you managed to address many questions in the past, including bigger text instruction on the video. Good one. But yet I still seen many people confused with the soldering part, which I also think that should be easy to understand but people not really. BTW I do find the cable provided for the touch sensing foil configuration the one below the LED very very to short cable, the one provided on the kit. Pre-installation from the kit might help a lot, such K buttons pre-installed on the back shell.

I've watch several installation videos this shows the best like the split screen for solder and no need solder. Thanks

Awesome. Broke my controller in just under 4 minutes! Guess I'll be buying a scuf. For anyone that's interested - the part where he pulls the white tape connector out - don't pull the chip out along with it.

Just ordered mine, and I can't wait to put it together! I'll be back with an update. 9 days give or take....:)

This music makes me feel like I’m floating at the jazz club , so clean, yet so smooth. Ps; Just got mine yesterday, installing today. Lets see how this goes.

Just finished mine. * Some advise* be careful with installation. All the ribbons from your controller are fragile. You can't screw all the screws in or the analog stick will get stuck or it will unplug a ribbon cable. You'll also need to find a sweet spot for every outer screw, the buttons/ analog stick will get stuck otherwise.

I ALREADY HAVE THE CLICKY HAIR TRIGGERT KIT.... WORKS WITH THIS KIT OR NO?????? THANKS

I have a problem, the joystick enters me randomly and often in "configuration mode" interrupting the use of the rear buttons. I have already cut the thread of the touch configuration.

do screws for the ps4 controller come with this kit my screws are horrible stripped

I have the DAWN kit (4 remappable back button) and it works great but I only use two of the back buttons due to how close they are together to prevent incorrect button presses. I like this model better suited to me. Its essentially the xbox one lofty kit for ps4. I lkve the lofty on my Xbox controller more than DAWN. Would much rather have the stops over the 2 extra remaps. Looks like I could just cut off the two buttons I don't use and install 2.0 backplate with trigger stops and not have to go through all the solder work and pay higher price. Anyway you could sell just that mod kit? Essentially DAWN to 2.0 mod kit. Please? I much prefer trigger stop and 2 remap like lofty. Either way, keep up the great work. Diy mods keep giving gamers options and more money in our wallets. Thank you.

this is the only good PS4 controller out there. I did the clicky triggers and back buttons and its awesome. Only thing, I didn't see a video of how to do both at the same time. So I had to flip between videos. Great product tho

Spettacolo, non vedo l'ora di provarlo ;)

If I already have the clicky hair triggers installed on my ps4 controller, will the dawn remap 2.0 kit work still? Or should I stick with the regular dawn remap kit?

How do I know what type of controller I have ?

Just installed it, works fine on the PS home page but games won't let me use the controller at all.

I dont understand what u mean when you showed 2 videos side by side! If you need touch pad remap back buttons or if you dont touch pad to remap back buttons??? What do you mean?

What’s the difference between with touch pad buttons and without?

The controller won’t connect with my wire but my other controllers do

Does using this kit increase button delay?

The blue sensor light comes on every 1/2 hr is so and disable the paddles, how to fix this?

Pieces don't fit on my PS4 controller. No good

Hi, can I buy it and use it only the trigger? I don't need remapping anything..... Only need the trigger stop

Do you need a soldering machine?

I have this on my ps4 but i have problem when i use it as Bluetooth the paddles works fine but when im using on the pc they stop working and i have to disconnect and do it again, you guys know anythinng about sth like that happening before ?

Video ben fatto, complimenti. Una domanda: ho bisogno per forza del saldatore per questo tipo di kit, o ho altre soluzioni?

Jesses this is incredibly amazing,but where is my another 2 back buttons😭😭😭😭😭😭

Sexiest DIY mod back buttons kit and trigger stop. Also you cant beat the soft touch shell. I am going to cop but PLEASE it needs two more back buttons underneath the buttons already for this to be the ULTIMATE GAME CHANGER!

So i can actually plus the back buttons and the hair trigger in one controller

stupid question because i know nothing, will taking the rumble packs out cause any issue?

How would you reset a kit. I had trouble when I first set mine up and ended up taking it off because I remapped some buttons to random buttons.

I already have the hair trigger kit, so is it possible to install this Remap Kit without using the trigger adjustment pieces?

Got mine today. It keeps going into the setting mode even though i installed it without sensing area... should i send it back or is there a fix? Figured out it happens when i press the left button.

I installed two of those and I’m having problems first I don’t see the blue light, second Im playing and middle of the game the paddles stop working just the paddles everything else working fine and I have to disconnect the controller and connect it again,

Wait im really confused with the wording can i have the touch pad work as normal if i instale these

The blue light keeps turning on during gameplay. How do I stop it?

My ps4 circuit is more complex does that mean it’s not compatible

Hola en las instrucciones viene en español como se programan los botones ?gracias

I just got this along with a bunch of button kits and a faceplate to go along with it and.. I just love it so much. It's amazing. Install was nice and easy, excellent reference videos. There will be 5 star reviews and uploaded pics on the way! Two questions though, what kind of wire is used to hook up the buttons? And where can I get some? I have not seen that in any of my local shops or online. It would be good for so many small electronics projects! I'm on a mission to find some of that wire for my work bench. Haha

Hello, I've installed everything and now my Ps button isn't working. Help.

So can i do this without soldering and if i cut off the L3 and R3 what do i replace it with?

The square has not worked since it was installed 🤔

Hi, i bought a kit for ps4 controller , i had installed it but now the controller cant connect to ps4 . When i try to connect the controller to my ps4 there is an orange light and its like the ps4 dont recognize the controller so the controller dont work How can i fix it ? When i remove your mode from the controller the controller restart to work fine

Hi, i have a question. I still have to buy it and iIm wondering how the remap works. If I remap the O button with the K1, what happens if I press O? Does the console still get the O input? Or will it just do nothing?

Awesome job u just build a whole new controller!👍👊

Hello @extremrate , i play fortnite and my edit Button ist on Touchpad and i want that the left paddle ist for build Plan and the right for jumping, is that possible

hope they do this for the dualsense

by the way I hope the back button switches can be replaced with higher quality,one of my v1 buttons stopped working after 2 month then I replaced a same new one.

If I chose not to do all that soldering, will a lose complete functionality of the touchpad or will I just not be able to remap to it?

I have problem in game. I dont press any buttons , i have cut the touch button and the main menue start any time.. And the back buttons stop working..

My PCB chip board had gotten messed up so I’m not able to insert the FPC cable into it. Is there anyway to get that replaced?

Can u also run the clicky buttons with this ???

I installed but my controller will not turn on, I followed the instructions they aren’t that difficult but what possibly could hav happened that it won’t turn on I’m new to modding controllers

just ordered this. if I wanted to use the back buttons for L3 & R3 and wanted to avoid soldering, could I not just use the PS4 system software to remap L3 & R3 to square & circle, then use the kit to map the back buttons to square & circle, effectively making the back buttons L3 & R3?

does wired work if i removed the battery completely?

So just to make it clear you don't need to solder it or do you lmao?

Everything is fine, turning on and everything but I can’t remap any buttons. I took out the touch sense remap and tried manually and it didn’t work. Helpp

I need help are buttons are sticking together, how do I fix. I am several of your products

do u guys give all the screws?

Can I put them on my ps4 pro controller?

Is this the project you guys were talking about 2 months ago or what? Or will you guys release the other ps4 project later on?

I bought a normal remap kit but unfortunately the brown ribbon cable was ripped when i put the shells back together. Is there a way i can get the brown cable without having to buy the whole kit again?

i have a big problem i have buy the version for the controller 040 050 055 but i have only 055 is compatible?

I have the CUH-ZCTU2 controller and I installed the JDM-040/050/055, my controller isn’t turning on, Is that why?

I installed it and it was pretty straight forward all buttons work except one which is strange. My R2 trigger button doesn't work but if i hit the ps button it'll suddenly start shooting rapid fire. Is there Anyone out there that can help a brother out

Extremerate how about a yellow textured grip ps4 dawn 2.0 kit?

how can u see the blue light come on when u have a screw there?

when is the ps5 version going to come! very interested

If I'll cut R3 AND L3 I can't use anymore? I mean I don't what sold them

Please supply to Australia via Amazon. We don't have the 2.0 Remap. Thank You and Love your Product.

Chicos puedo tener esta modificación junto con los clicky triggers?

When the trigger stops are on, does it count as a full trigger pull like with your clickytrigger kit or does it only count as half? In example; with some racing games, the full motion is required.

Do you have kits for Ps4 CUH-ZCT 2 controllers?

So II’ve placed an order , I find it weird you guys do wire transfer but my order has been pending for a day .why??

Do I have to soder

Hey I was wondering if you can map share button or PlayStation button to back paddle

does this work with ps4 pro controllers and those made in 2016

Installed everything correct. It done the 3 blue flashes like it program the button but it doesn't work when I try to use, do you know what's happening?

I am getting some very strange glitches after installing. Can you recommend what to do? Glitch #1. My L3 button now seems to be crossed/combined with L2. Every time I press L3, it is as if I am pressing L2 and L3 at the same time. Even if I unmap my L3 button to nothing in game, pressing it still seems to trigger a L2 press. I thought my original controller was broken, so I installed the remap kit on another controller, and same thing. I did not solder the L3 and R3 wires to the motherboard, and neither back button was mapped to L3 or L2. Glitch #2. I tried mapping my right back button to left on the D-pad, which temporarily breaks that button on my controller, left on the D-pad won't work, and the back button won't work. The weird thing is even after resetting/unmapping the right back button or mapping it to another button, it takes a long time every time before the left on the D-pad button starts working again. Sometimes it has been 15 minutes, sometimes it has been hours. Not even pressing the reset button on the back of the controller fixes it. It will just start working again on it's own at some random time in the future. Only seems to happen with that left d-pad button specifically.

Is there any way you guys can make round buttons for the 4 button dawn remap kit? I would definitly buy a set.

Hi i have installed the full kit on my controller but i didnt do any of the soldering as it didnt come with the foil part on my board. Can i still remap the back button to x ??

At 5:30 ... with attention to the left screen ............Is he just shorting the upper right leg of that white button to the first (furthest left) contact point for the ribbon cable? Just asking to be sure in case that is what I need to do in a few days ...

Per quanto riguarda il filo blu e rosso che vanno su l3 e r3, c'e un altro modo per attaccarlo?

I have installed perfectly the kit and it work, but i cant charge my controller and the lights of the led dont switch on when i use it

Great product but it goes into remap mode by itself sometimes, even though I already cut the wire with the foil piece. Is there a way to lock it so it doesnt remap?

I only have x and o on my back buttons. Can you tell me why is it that when I click my L3 button while aiming and shooting (L3+L1+R1) it activates my "R2" as in, it changes my weapon in game as if I had pressed R2? Its very annoying and I can not find a fix to it. It almost seems like this mod can not handle a severity of continuous button presses which makes it go haywire and activates random buttons? PLEASE HELP

Can you sell those circular K buttons separately? I prefer the original Dawn mod

And if u don't want to use the l3 and r3. Do u cut the wires and only plug the button one in

Hi there I have a problem with mine. After installing the kit my l2 controller doesn’t work and I found how to fix it by moving the flex ribbon on the kit board but after I put it back together my l2 start acting on its own sometimes it doesn’t work

@ExtremeRate Hi, i can't set K1. When i enter the setup mode as soon as i press K1 + any other key, the setup will exit.

I have a big problem with stick drift after installing the kit. Now I removed the kit and the stick drift is gone. And Tipps??? Best

Hi, Love what you guys do. I love the design of this one with the circular buttons and trigger stops. I'm currently using the 4 button design and love it however, I don't use the upper back buttons due to there akward placement. I feel I'm not alone in this thinking... Would be much nicer if the upper ones were down near the rumble motors. I realize the rumbles would probabably be in the way of the mounts required, but I think people that use controllers like this do not require rumble, and would happily take them out to make room for ring finger buttons. Im thinking about doing this mod myself using this design combing with 4 button, drilling extra ,holes , perhaps mounting with hot glue extra buttons using 4 button version, and taking out rumble motors.. Is there a way of buying individual parts?. I wanna make a couple controls. Couple extra things, rubberuzed textured, coloured buttons would be neat, and also i thing the trigger stops should go down a maximum of 50% in my opinion.. htese seem to go a long way down.. just my thoughts, thank you for reading

Are there any trigger stops that don't have the extra buttons but still be able to switch between them on/off and so so I can play both cod and rocket league

Hey eXtremrate i bought my dawn remap kit 1.0 and dtfs led kitnto install together and they both dont work

I cut off the heat sensor and the “mapping” function now turns on randomly here and there. Any tips?

dove posso trovare dei pulsanti di ricambio per questo prodotto?

Woow I'm Bay one I'm setup is perfect I'm we're we're happy for Baying thanks for good prodect