DIY Pull up Bar (less than 50$)

Подписаться 13 тыс.

Просмотров 309 тыс.

50% 1

This weekend we finally made our own Pull-Up bar. In this video we will show you step by step what to do. This method is really cheap, for under 50 dollar you too can have a Pull-Up bar like that.
List of materials:
- Galvanized bar 3/4 inch: 1x € 9.80
- Wooden bar: 3 m long, 6 cm x 8 cm: 2x € 7.60
- Cement (25kg mix): 5x € 3.80
- End caps for the galvanized bar: 2x € 2.10
- Black tar (200ml): 0.4x € 6.70
Tools you will need:
- Wood-drill 3/4 inch
- Sandpaper
- Buckets
- Measurer
- Shovel
- Wrench
- Brush
- Level
Twitter: / barrookie
Instagram: / barrookie_calisthenics
Facebook: / barrookie-536553366506983
Music: Credit to No Copyright sounds
- Channel bit.ly/16LtdDz
- Song: Kontinuum - First Rain • Kontinuum - First Rain...
- Free download bit.ly/1NySZh0
#DIYPullUpBar #BarrookieCalisthenics #DIYGym

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 231

@balkan.improvement1696 4 года назад

5 years and still answering to comments you are legends

@BarRookie 4 года назад

I'm just trying to be polite xD thanks for noticing 😍😍

@serenitysounds208 4 года назад

Well gyms are closed so let’s get to building

@RsAncientPk 4 года назад

Just built mine over the last 2 days and it's wobbly as fuck.

@jairol.1671 4 года назад

Big facts

@BarRookie 4 года назад

Did you put it deep enough into the ground?

@RsAncientPk 4 года назад

@@BarRookie 1 meter into the ground in a 35x35 cm hole. 100 kg of concrete mix in each hole

@LdRfilmz 4 года назад

might have to do this because with this corona bullshit the only work out I have right now is going running and jump rope

@levihalperin7649 7 лет назад

uv been making these quality videos for two year but still only have 570 subs? 😮 Man youtubes been cruel to you guys.

@BarRookie 7 лет назад

Thank you for your awesome comment! I really wish it was more too, but for me it is about the fun of making videos. In time this channel will grow! xD

@BarRookie 5 лет назад

And then put everything in the ground? That should work too. And it will indeed be a confirmation that everything is securly in place. While doing that, you can even screw the empty buckets to the wood as well. That way you'll be sure they wont come loose either!

@BarRookie 5 лет назад

I don't think that will be stable enough. You would want a larger base for that. The smallest amount of swing will make the construction fall over. Unless you have very large buckets that are also very wide.

@leonflores2933 5 лет назад

@Dan Don put them in the ground, your face will thank you!!

@ElKabong61 5 лет назад

I would have liked to see you do at least a couple of pull-ups on that!

@notlookinforahug 4 года назад

probably broke in half

@BarRookie 4 года назад

@@notlookinforahug Guess what, it didn't xD

@notlookinforahug 4 года назад

@@BarRookie great. Keep it up rookie

@paulpanchukov3956 4 года назад

I can only imagine how wobbly that thing is. Cheap isn't always best option

@sausagesizzler649 3 года назад

@@BarRookie should have put evidence of it not breaking in the video 😂

@sevon8315 6 лет назад

Very detailed video. And under 50 dollars too. I will definitely be building mine soon. Thanks👌

@BarRookie 6 лет назад

Great man! I'm building one in my own back yard too atm. Will post a video soon about what I would different! 🔥

@mudithaaruppola8989 3 года назад

very clean , boss work , like a pro thanks ........ wish to goal i1 million subs..

@BarRookie 3 года назад

Thanks Muditha! Indeed, let's go to 1 million!!

@jackcespedes1119 5 лет назад

Phineas and Ferb

@dieu-huyentran5185 4 года назад

Thank you for the video. Does it wobble when you do muscle up or wild swing on this bar?

@tutoradorni9570 4 года назад

New subscribed here! Thanks for this video, I'm going to build my pull up bar!

@parker3819 6 лет назад

I love Hans and Franz. ( pump you up) ... Lol. you guys are great keep up the good work

@BarRookie 6 лет назад

Hahaha I looked it up! That shit is hilarious 😂😂😂

@fulcruman1877 4 года назад

Heur me know and belleeve me ladur, we are heur tu pomp you up!! 😂

@BarRookie 4 года назад

Thank you all for watching! This video is already 5 years old and there are some things I would have done differently. Please check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DOG58Bzkodg.html And, happy building!!💪

@calisthodude 4 года назад

BRO please do collaboration with me I am a calisthenics athletes only 15 year old need help

@robbieblieck8792 3 года назад

Does it still stand to tis day? I just suscribed btw hahah good content

@BarRookie 3 года назад

Unfortunately it doesn't! We had to saw it off because we don't live there anymore. Thanks for the sub! If you want to build a pull up bar, I suggest you check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DOG58Bzkodg.html It's about all the things I would do better ☺️💪

@camerongray7767 6 лет назад

In Australia one of these wooden bars costs $42

@BarRookie 6 лет назад

Whuuuaat! :o so much!! :o Treated or un-treated?

@camerongray7767 6 лет назад

BarRookie Treated, but it is not much cheaper untreated. Almost all timber in Australia is treated these days anyway.

@MichaelSync 2 года назад

@@camerongray7767 Ya.. I just dropped a comment about that. and then I saw your post. I wanted to build it but not cheap.. So i managed to get a used pull-up (250cm height) from the marketplace.

@adonygrapes 3 года назад

Remember kids this was filmed back in the 1800’s so 50 dollars will be around 6 billion

@BarRookie 3 года назад

Hahahaha 😂 I really love this comment! Keep it up brother!

@adonygrapes 3 года назад

@@BarRookie it’s alive!

@cainwood3219 3 года назад

Hey Dre, Are you guys still being friends ?

@BarRookie 3 года назад

Hi Cain, Yes we still are. A bit less then in the hay days. But we hang out from time to time ☺️

@cainwood3219 3 года назад

@@BarRookie Good to know that Dre... it's always good having a good friend. 👍

@BarRookie 3 года назад

It truly is Cain, for working out however, I prefer to switch between being alone and being with friends. What is your preference?

@garrettgrills8928 2 года назад

this little project will cost me 2000$ in todays time

@BarRookie 2 года назад

Unfortunately I could not have calculated this in when I made the video all these years ago xD

@bleekwater6176 3 года назад

Hoe noemen die stukjes voor de baar vast te maken in het hout? In de beschrijving staat er end caps maar ik vind niet wat het is. Bij mij zitten de palen al in de grond enkel de baar moet er nog aan vastgemaakt worden

@BarRookie 3 года назад

Hangt er van af. Je kan de baar door het hout boren. Dan heb je geen stukjes nodig. Maar andere vijzen liever de baar aan de palen en dit kan met een flens (flange in het engels). De encaps zijn vooral als je een bar hebt met schroefdraad, dan kan je dopjes voorzien

@bleekwater6176 3 года назад

@@BarRookie Thx man voor je antwoord man flens dat is wat ik zocht, een buiskoppeling dus.

@yourreflection7590 3 года назад

y so serious bros

@addisondre8083 4 года назад

The wood alone cost more than 50$

@BarRookie 4 года назад

Damn son, where are you from? :o

@SatanicDiet 5 лет назад

I just installed a 4x4 post with a 1 and a quarter inch outer diameter black iron bar that I painted with forest green Rust-Oleum enamel. My bar is about 9 ft above the ground. The posts were a little bit wobbly but I fixed that by attaching a set of dip bars to one of the posts. The other side is attached to my porch. And because I am only about five foot seven in, I installed climbing holds up the side of the post. Sometimes using the holds to get up to the bar is the funnest part.

@BarRookie 5 лет назад

Damn, sounds like a very solid construction. Its weird to me that 4x4 posts are still wobbly. Maybe You didn't put it deep enough into the ground? Anyway, great job man!

@SatanicDiet 5 лет назад

@@BarRookie it was only wobbly at the very top. I sunk them three feet in the ground. But I love using the bar and do it every single day! Thanks for the reply oh, you guys are great

@jimmyinglish2669 4 года назад

Maybe use at least a 4x4 post or even better a 4x6? Would be much more sturdy. Great idea guys!!!!

@BarRookie 4 года назад

So So true. In my second pull up bar build I used 9x9 cm poles and even those could have been a little thicker! Thanks for your comment!

@williamcripfoe6754 4 года назад

Wait here in Canada what should I do if it’s like -30 outside will the pull-up bar station thing survive in the cold weather?

@swajalsingh1622 4 года назад

Nice. I'll build this next summer

@BarRookie 4 года назад

Good luck man! Some tips I can add: - Use thicker poles: 9x9 to 14x14 cm will be a lot more sturdier - The buckets are great, but we missed one detail, you need to screw the buckets to the poles from down below.

@ajn9223 2 года назад

Can we do freestyle on this is it a solid one?

@BarRookie 2 года назад

Not really, you'll need thicker wood for that. I recommend checking out this video: The Sturdiest DIY outdoor Pull-Up Bar with Dip Bars ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1L4A4WbdRW8.html

@talhadonchota511 4 года назад

I became your fan Great love you

@BarRookie 4 года назад

Thank you so much!!

@syco4035 4 года назад

Hey I’m just wondering if the bar felt to small. All my construction store sells is 1.1/2 inch bar and I wasn’t sure if that would be to big

@BarRookie 4 года назад

That could be to thick, but it will help you train your grip. I suggest you go to the store and grip that bar and see how it feels. It could be that 1.5 inch feels very comfortable for you.

@yyyousefff 4 года назад

Thanks for the help guys!

@BarRookie 4 года назад

You're welcome!!

@yoooyoyoseph9112 3 года назад

Where did you get the wood from and what kind is it?

@yoooyoyoseph9112 3 года назад

Btw keep up with the great vids

@BarRookie 3 года назад

Thanks man!! I would suggets pressure treated wood. You typically get it at your local hardware store

@matteo507 3 года назад

Can i use 7*7 cm wood bars ?

@BarRookie 3 года назад

You can! I would recommend going for 9x9 cm if you still need to buy your wood. That will be more sturdy!

@marcthebarber239 4 года назад

Do I really need cement

@marcthebarber239 4 года назад

It's not a joke I wanna know

@BarRookie 4 года назад

I think you do, for extra sturdiness

@italywantstoexiteu651 4 года назад

You don't. You have to treat the wood well before doing that. You will have to pack the soil very well and it might work.

@hdela8172 4 года назад

Great video brotha!! Do you want to be RU-vid friends?

@BarRookie 4 года назад

Thanks man! Of course I do! You have some good videos! 💪

@BobBob-tt3fe 4 года назад

Can something like this hold 300 pounds?

@BarRookie 4 года назад

I think it will. If you want to be sure, you can use thicker poles.

@BobBob-tt3fe 4 года назад

BarRookie thank you. I think I’m gonna make one myself. 250 pounds is realistically how much I would like it to be able to hold ( weighted Calisthenics).

@BarRookie 4 года назад

Awesome brother! I recommend you check out my latest video on making a pull up bar. There Inve put some lessons learned.

@abdelkarimelfarkouch5257 3 года назад

The euro to dollar conversion is wrong even for 2015

@AlbanianGirl28 7 лет назад

You could be doing with actually using it lol

@BarRookie 7 лет назад

What do you mean bro? 🙃

@DRAKEJUN1OR 7 лет назад

BarRookie I think he's saying your small

@Excal123 6 лет назад

He means you should shown you self using the bar

@thesun1677 2 года назад

These materials are worth $4,564 today

@bruh-so8vp 4 года назад

Did it take you guys 5 25kg bags for each hole or was 5 bags the total amount used

@BarRookie 4 года назад

If I remember correctly, I think it was 5 sacks for the total /

@IshhhNothing 4 года назад

Just wondering, what drill do u use to drill the hole big enough for the pole ? Plz

@BarRookie 4 года назад

I used a flat self cut wood drill. But you can also use a forstner bit or a hole saw bit. Depends on what you have laying around. If you need to buy stuff, the hole saw bit is more versatile. Make sure to take the diameter of your bar.

@reniermoller381 3 года назад

Man how I Love to see me some metric 😭💕

@BarRookie 3 года назад

Metric for the win!!!

@TheTaleOfMC 8 лет назад

What did you mean when you said out the buckets in the ground? Are there actual plastic buckets with the cement in them in the ground?

@BarRookie 8 лет назад

Yup, there are indeed buckets with cement in the ground, as sort of anker points for the poles.

@ZeNex74 6 лет назад

cement in buckets and around buckets?

@MrSchwa-jz6tb 6 лет назад

In the buckets and around. You fill the whole bucket with cement to anchor the poles, then you fill around the bucket to anchor the anchor. It depends though how wide the whole is. You probably just want a bucket to fill the whole so it fits snug and you don't buy/waste more cement than necessary.

@janoliver5193 3 года назад

2021 and I'm still getting this on my recommended vids

@BarRookie 3 года назад

Its absolutely crazy man! Because I have a far better version. And this build can be optimized a ton! Thanks for dropping by though!

@mikee6740 4 года назад

I bet 100 bucks they can't do 5 pull ups...lol..

@BarRookie 4 года назад

That was like 5 years ago buddy. Yes we could do 5 Pull ups back then and even more now xD

@gkmax3991 3 года назад

what did you guys do to ensure the bar doesn't move if you swing?

@BarRookie 3 года назад

On this exact bar we've put diagonal side beams to prevent that. But that was a flaw in the design. I suggest going with thicker poles in the first place. I have some more tips in this recent video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DOG58Bzkodg.html&ab_channel=BarRookie

@JT-spoods 3 года назад

anyone know what type of caps they used

@Ali-kh1rs 4 года назад

Is there any way to build it from the fence posts in the backyard?

@BarRookie 4 года назад

It depends on the height of the fence posts! Back at my parents house we build a pull up bar in the corner of 2 fences. We did put additional poles next to them to make the bar higher. Just make sure you check for stability while you're at it.

@briantaft5622 3 года назад

thank you

@BarRookie 3 года назад

You're welcome brother!

@Roberto-un4tk 3 года назад

Nice men!

@BarRookie 3 года назад

Thanks!!

@cranebeg 5 лет назад

It was wobbly when you only tapped it with your hand :( Need solid construction. What will stop the metal bar spinning?

@BarRookie 5 лет назад

Yes indeed. The thing that I would to differently (and which I did in my own house), is to use thicher wood. More like 14 by 14 cm. This will make it a lot sturdier. The way to stop the bar from spinning is by drilling the holes just big enough. Then you need to really squeeze the bar into it. And when the wood expands it will tighten it. You can also just put a bolt into it. Hope that helps!

@cranebeg 5 лет назад

@@BarRookie Thanks for your reply, yes helpful.

@peter4519 5 лет назад

Did you guys check if it was level during the concrete pour?

@BarRookie 5 лет назад

Yes We did!! :D

@JRCoronado24 4 года назад

Guys how you hold the bars in place while pouring concrete?

@anangelsstar 7 лет назад

is there anything i can use besides tar for the bottom of the wood?

@BarRookie 7 лет назад

You probably can! You just need a coating that prevents the wood from rotting. Carefully picking the wood also can prevent you from using tar. But your best bet for that is to go to your local hardware store and ask for some professional help 😊😁

@donniemcmillin4839 4 года назад

Great vid, and build! I just made my a video of building my own DIY pull-up bar! Thanks for the inspiration!

@PATeBike 9 лет назад

thanks! Very good

@BarRookie 9 лет назад

+Just Living Calisthenics thanks for the support!

@pdsi17 4 года назад

How can you concrete wood

@dediiskandar 8 лет назад

isn't good to paint or give something coating to make it more waterproof? especially for the wood ..

@BarRookie 8 лет назад

Yes, it is really recommended to give it a good coating! But we only realized this after the video was made. So feel free to check part 2 where we do the paint job.

@els3099 6 лет назад

Believe me, this is even more that 10$

@BarRookie 6 лет назад

It is more! Its 50$.

@NoWokeComedy 5 лет назад

00:30

@Prime_Legend 4 года назад

Gyms have closed once again for me and time to get to building.

@Tommygimbal 4 года назад

great job guys!!

@BarRookie 4 года назад

Thanks man!

@concordiaJV 4 года назад

How long did it take to build it? Love the videos by the way!

@BarRookie 4 года назад

About a day and a half. Really depends on how well the digging goes. Here we had a lot of roots in the ground.

@BarRookie 4 года назад

Thanks by the way 🔥🔥

@crisupremee9266 4 года назад

At first it looked like they were in a greenscreen

@at7860 4 года назад

nice, but 60euros is not 50 dollars

@BarRookie 4 года назад

But it is also 5 years ago :o

@at7860 4 года назад

@@BarRookie i am currently making the same, thaks, bcuz i was training with an Iron gym

@prasiddhakarki 4 года назад

Thank you so much I am going to try this

@featzkbai 8 лет назад

hahah hoe overtuig ik mijn ouders om mij een pull-up bar te laten ingraven in de achtertuin?

@BarRookie 8 лет назад

Hahah, Goede vraag! :D Eerst en vooral tonen dat je gemotiveerd bent om te trainen en dat het iets is dat niet binnen 2 weken zult opgeven. Daarna, toon hen dat het relatief low-profile is, tenzij je een super kleine tuin hebt natuurlijk! Nodig hen uit om ook gebruik te maken van de Pul-up bar! Of, je maakt de pull-up bar 's nachts en hoopt dat ze deze niet zullen wegnemen xD

@featzkbai 8 лет назад

BarRookie haha nou ik ben al ongeveer 5 jaar bezig met fitness en er is op 20-30 minuten fietsen een calisthenics parkje, alleen ik heb niet altijd zin om zo ver te fietsen, dus zeggen mijn ouders dat ik maar naar de sportschool moet gaan, alleen het probleem daar is dat mijn sportschool (waar ik dus al 5 jaar naartoe ga) geen goede pull-up bar(s) heeft, dus nou is hun argument dat ik het al 5 jaar daar heb gedaan dus het nog steeds moet kunnen, ook willen ze het uitzicht niet verpesten (ik zou hem natuurlijk ook gewoon in de zijtuin uit het zicht kunnen bouwen). Denk dat ik het laatste maar proberen! ;) Toch bedankt voor je reactie :D

@BarRookie 8 лет назад

Ik zou zeker dat laatste eens proberen hoor! :D Laat mij iets weten als het je lukt! :D

@grandbuba 6 лет назад

Bij mij wat de druppel de opmerking 'nou, er kan ook een schommel voor de kleine aan hoor' die het hem deed. En ja, die kan er ook aan, eerste schommel die met klikkers ophangt aan 4 cm dik manilla rope.. ^_^

@bodystomp5302 4 года назад

That bar looks legit. Good job fellas.

@abelinkin 4 года назад

where you guys from? Cool video.

@BarRookie 4 года назад

Thanks man! We're from Belgium!

@abelinkin 4 года назад

Parlez vous Francais? That’s and a few other phrases I remember from 3 years of High School French maybe 35 years ago. I thought you guys were German or Austrian. Lol.

@hdela8172 4 года назад

Awesome!

@BarRookie 4 года назад

So are you man!!

@iceman846 4 года назад

Try doing some pullups

@BarRookie 4 года назад

We did! I was super awesome fun!!

@graphguy 6 лет назад

Great job guys!

@BarRookie 6 лет назад

Thanks!!

@jojopellegrini2945 4 года назад

Great job gentlemen

@BarRookie 4 года назад

Thanks man! Check out the video about the pull up bar 2.0 with some more experience into the build.

@newchangeunlisted_viewer5594 4 года назад

Thx

@BarRookie 4 года назад

You're Welcome!

@ThatOneDudeNathan 4 года назад

What do you coat it with?

@BarRookie 4 года назад

In the video we used tar. On my second pull up bar I used treated wood that does not need coating.

@Waddeuh. 8 лет назад

epic!

@davidc5808 8 лет назад

+BarRookie what were the size of your end caps for the bar? We're the end caps metal or plastic? Nice vid!

@BarRookie 8 лет назад

Thanks! :D We used caps to fit on the 3/4 inch bar. Because the bar is threaded at both ends. They are made out of galvanized steel. Hope that helps :D

@richardsonmedina 6 лет назад

Nice video but Wood, i prefer metal

@BarRookie 6 лет назад

Thanks man!! Me too, but I actually never thought about making a full metal construction 🤔

@BrewCrew-tq8oy 4 года назад

I wouldve made it all above ground.. no cement necessary, and you can take it elsewhere if you were to move. Install a peg about two feet up from the ground so u dont have to jump to get on the bars.

@BarRookie 4 года назад

Woudn't that make it super unstable?

@bellaseminara 9 лет назад

Awesome!

@donriempp7251 5 лет назад

is it still standing?

@BarRookie 5 лет назад

Yes it is :-)

@robedilezeus5740 5 лет назад

Good Job.

@worgenario28 5 лет назад

Thank you guys

@BarRookie 5 лет назад

You're welcome!!!

@doctors_z4294 8 лет назад

nice project

@BarRookie 8 лет назад

Thanks man! :D

@stevieb8377 8 лет назад

Great Video.. best ive see yet

@BarRookie 8 лет назад

Thanks! :D

@dumb-old-trump Год назад

nice projekt. don't know if i understood it right with the buckets in the hole and the pole in the buckets? if so don't do that the next time you have a projekt like that. the pole will always stand in water if the water cant get away. dig your hole put the post in put a little dirt or gravel in so the bottom of the post is covert and then your concrete.

@JoeyToD 8 лет назад

Jow mannen, Onlangs begonnen met Calisthenics en dacht er ook aan om een eigen bar te maken! Waar hebben jullie het materiaal gekocht? Wat is de lengte en diameter van jullie bar? Ondertussen hebben jullie het al een tijdje, zijn er dingen die je anders zou hebben gedaan achteraf gezien behalve de extra steunpalen? Ben ook van België btw :) Greets

@BarRookie 8 лет назад

yo yo yo, De afmetingen staan in de description. het materiaal hebben we gekocht in de doe-het-zelf (gamma). Dingen die ik persoonlijk anders had gedaan zijn: - een dikkere bar (1 inch ipv 3/4 inch) - dikkere houten balken (10x10) gebruiken zodat die steunbalken niet nodig waren Dat is het zo'n beetje. Anders heel content van de pull up bar! Beestig om nog iemand van Belgie tegen te komen! :D Van waar precies?

@JoeyToD 8 лет назад

Antwerpen :) , was al een tijdje geïnteresseerd in het hele calisthenics gebeuren dus ik dacht mij er eens in te smijten :)!

@BarRookie 8 лет назад

Zeker doen! :D Hopelijk vind je mensen die mee willen in je Calisthenics journey. Dit maakt de sport des te leuker. :D Ikzelf ben van West-Vlaanderen, maar ik hoop dat we ooit eens kunnen samen trainen! :D

@JoeyToD 8 лет назад

+BarRookie bedankt, hoop ik ook, zal eerst wel serieus moeten oefenen want ik sta nog heel ver van waar jullie staan :D jij ook succes ;)

@BarRookie 8 лет назад

Komt wel hoor! :D gewoon blijven trainen en doen wat je graag doet! :D Danku! :D

@readGodsword 7 лет назад

Nice job! Did you know you can save alot of work by pouring the dry cement in the hole, than add the water and mix a bit with a stick.

@BarRookie 7 лет назад

Thanks! No I did not :o. Is it as good as mixing it upfront?

@readGodsword 7 лет назад

yes. I have sunk alot of fence posts. Works just as well. Pour some water in the hole, than some cement, mix with a stick or scrap of rebar, and keep going till you fill it. Try not to breathe it in or get it on your hands, its not good for you. :-) Nothing to clean up either!

@BarRookie 7 лет назад

Thanks for the tip man, it will get handy someday :D There are always things that could have done better afterwards. Yes I noticed, it really dries out you skin. Did you made your own pull up bar as well?

@readGodsword 7 лет назад

I am about to buy the stuff to make one, just looking to get ideas, the height on yours looks perfect, but I think I will do two chin up bars, one for me, one taller for my hubby and probably two parallel too, why not? My grandson can hang on the short ones! Will be great for some upper body strength. Where are you two from by the way?

@mischiefzgaming4273 5 лет назад

@pdb4men 8 лет назад

do you speak dutch ?

@BarRookie 8 лет назад

Ja, elke dag! :D

@pdb4men 8 лет назад

hahahaha ik dacht et al !! dat accent kende ik wel ;) :p maar goe bezig !

@BarRookie 8 лет назад

Ik probeer wel het weg te werken dat accent, maar het is moeilijk! Van waar zijn jullie in Belgie? En Thanks :D

@pdb4men 8 лет назад

hahah ja da kan je ni zomaar wegdoen ma da geeft ni en van oost vlaanderen ;) jullie ?

@BarRookie 8 лет назад

Gewoon blijven oefenen e :D Je kan er wel op letten hoor :p West-Vlaanderen, nie zo ver van elkaar dus :p

@alfemelmax4995 6 лет назад

Why do the wooden bars start to shift back in forth, happens everytime once a year in my training camp. Could it be the weather?

@BarRookie 6 лет назад

I can't tell, is it always during the type of weather that they shift back and forth?

@alfemelmax4995 6 лет назад

Yeah, it seems like it.

@saifulbadrul9697 8 лет назад

👍

@ZeNex74 6 лет назад

caps on end? how stop spinning?

@BarRookie 6 лет назад

The caps are for preventing that things get into the bar, like bugs and stuff. For us spinning was not an issue because it was a very tight fit. If you find your bar spinning, you can put a bolt trough the wood and the bar.

@kingvase0113 7 лет назад

Why do this when you can buy one for 20😂😂

@isaiahdaniels5643 7 лет назад

kingvase 01 Where?

@BarRookie 7 лет назад

If you have some good connections you can probably do it for free too xD But please tell me, where? :P

@isaiahdaniels5643 7 лет назад

BarRookie I'm trying to buy a bar for my brother, everything I'm seeing is 80ish.

@BarRookie 7 лет назад

Brandon Burrows Have you tried asking around? Maybe some people have a decent pipe laying around or some wood. This can help to shave some dollars off the price. A door pull up bar is also a great thing to have, definitely cheaper and more portable. However, you can do less tricks on them.

@jeronymkristof12345 7 лет назад

4:16 wtf is he doin, rappin?

@nodisponible4448 8 лет назад

What is the exact diameter of the steel bar you used? Thank you

@BarRookie 8 лет назад

+Italo Cornejo 3/4 inch (about 19mm) but a full inch bar will work just fine too :D

@BarRookie 8 лет назад

I would lie if I told you I know the answer! To be honest, I prefer 1 to 1 1/4 inch (I = Blond guy xD ). None the less, 3/4 inch is still decent! It is really up to your personal preference.

@chico7695 8 лет назад

+BarRookie There is inside diameter and outside diameter im pretty sure 3/4 inch is the inside just like my bar.

@chico7695 8 лет назад

+Chico Dermendzhiev The outer diameter of mine is 1.25

@BarRookie 8 лет назад

Chico Dermendzhiev Yes I think it is indeed the inner diameter (3/4 inch). Just measured it and the outer diameter is 1 inch. But again, it is all about personal preference.

@TommyHernandezMinistries 6 лет назад

I had to give the video a dislike. The process wasn’t explained thoroughly enough. What type of coating do you use? What is the name of it etc.

@BarRookie 6 лет назад

Hey man, I'm dorry I disappointed you! If you want additional information feel free to ask! The coating we used for in the ground was black tar (apparently that's what its called). Shoot if you have more questions!