DIY Remote Downstream Injector Box

Подписаться 5 тыс.

Просмотров 19 тыс.

50% 1

This a DIY build for a remote downstream injector box. I forgot to mention that you should add a fuse at the battery with a 15 or 20 amp fuse. Any automotive style fuse holder & fuse will work. The links are below of the parts I used. I would also recommend Tru-Blu sealant on the hose barbs when installing them into the ball valve. Please like & subscribe to support the channel!!!
Wiring video here: • DS Remote Box Wiring E...
Switch wiring
Black with to ground on battery
Green wire to positive on battery
Red & Yellow to positive input on remote switch
White wire not used
(I ran a ground wire from the battery to the remote switch and the ground wire from the switch to the same ground on the remote switch)
U.S. Solid Auto Return Ball Valve- www.amazon.com/gp/product/B06...
On/ Off Switch- www.amazon.com/gp/product/B07...
12 Volt Remote Switch- www.amazon.com/gp/product/B08...
1/4 Hose Barbs- www.amazon.com/gp/product/B08...
Junction Box- www.homedepot.com/p/Carlon-6-...
1/4 Hose- www.homedepot.com/p/Everbilt-...

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 159

@peterblau6754 4 месяца назад

Awesome instruction and demo vid. I've been checking a lot of remote down streaming videos and different remote setups. This little build can save DIYers hundreds of FRN's. Thanks a bunch for putting this out.

@DumbCarGuy 3 месяца назад

4 yrs later I see this video. I was watching some of these diy remote setups and now i realize why the other guys put the on/off switch on the side of the box. I was wondering why aren't they putting them on the top of the box. Then i seen you press the button and because its not a momentary switch it says sunk in and can hold water and possibly make the switch go bad is what I am thinking. What do you think about my little theory?

@allproexteriorservicesllc5338 3 месяца назад

That is a great theory! Also use the Banjo ball valve as it will last longer. Thanks

@shawncontreras Год назад

They make different size on the valve what should inuse fir and GPM

@allproexteriorservicesllc5338 Год назад

the DS injectors run on 1/4 line. Use a 1/4 valve. Thanks

@GeauxHomeImprovements Год назад

Do I need buffer tanks and bleach tank for this setup to be able to work

@allproexteriorservicesllc5338 Год назад

No, you can use the drop stick method. Thanks

@srdjannakalamic5856 Год назад

Best video ever made by far.. This project really saves the day

@visiblehd5165 4 месяца назад

Could you please help me with the battery wire! Like just a link to one or something. I don’t know what gauge to get and I also don’t know if I need a fuse or not on the wire. I also can’t find one of those circle connectors that will fit on the remote part to hold the wire there, they are all to big of circle connectors that won’t fit where you screw it into please send a link of the exact wiring stuff!

@allproexteriorservicesllc5338 4 месяца назад

A 14 or 16 guage wire will work. Also, out the fuse close to the battery in the event it shorts out. www.amazon.com/GearIT-Marine-Speaker-Conductor-Electrical/dp/B0CC8HBGM4/ref=sr_1_1_sspa?crid=3HGGRFEORN6SY&dib=eyJ2IjoiMSJ9.LdJ8uetzS6n4n8ppnMVYHrNQB1dEhA37q-TzTUDSbGFg3hPFNQj0TImXL1J-OdTg191wMx7aIVdIcbp58-_PurVmLdCJc4FMhGbiCs4BFfyF0e3periXhmeBkLhj9eZ8YD2cHx2RpFR9aLkiogtE9Hndnf4nJv27WTQDo3Kam0nUx7RSkd1teR5cHTl5meUuGOklnQG9Vv7PgCtRpQipAIyslmWokfuzh8v7jod-GFQ.1OEg9e3QtNzDvIZUs4xn6cCc2DiYVdm9yIQgvMPoCvc&dib_tag=se&keywords=14%2Bgauge%2Bmarine%2Bwire&qid=1709905574&sprefix=14%2Bgauge%2Bmarine%2Bwire%2Caps%2C113&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

@Recon77 2 месяца назад

with this set up other than the electric pump for the soap to the pressure washer hose is there a pump to the remote pump or when its open does it naturally suck as if the switch wasn't there?

@allproexteriorservicesllc5338 2 месяца назад

The injector sucks naturally. When you turn it off, he ball valve closes preventing the suction therefore no soap or SH. Thanks

@littlespressurewashing 2 года назад

Great channel and video

@allproexteriorservicesllc5338 2 года назад

Thanks!!

@MostlyPeacfulRiots 3 года назад

Nice bro, we ended up making one also but we just used a Bluetooth water sprinkler system from a chem tank to an injector then ran the hose line from injector to a split in our wip hose from the real. This saved us alot of money and time, we used the extra cash to buy a 200' of hydraulic hose that has a teflon inner 3/8" line so the Sodium Hydrochloride doesnt break down our hose added a Chem Rated spray gun with 6063 rated aluminum lance we made. This way we not have to worry about replacing anything that breaks down in the injection bypass system itself or the components such as ball valves ect. The Bluetooth timer has a lifetime warranty also 😁.

@allproexteriorservicesllc5338 3 года назад

Awesome!! I need to look into that. Thanks

@MostlyPeacfulRiots 3 года назад

@@allproexteriorservicesllc5338 hey can I ask you a question pls sir. I have been trying to remove all the flow restrictions throughout the various components on our setup from pump to tip. We bored out our Unloader, removed a couple filters that bottlenecked the 3/8" line as well. I had noticed the inner part of every swivel we have have ( we have a generic one and a mosmatic one ATM) all of them have a tiny tiny little hole that leads to the ball valve. I dont have a GPM gage but i can tell just from feel when I hook the gun up without the swivel vs with its def stronger with it removed. Im assuming its because of that bottleneck in the swivel so I guess my question is 2 parts.... 1. I this a correct assumption? and 2. If it is restricting flow rate are their any type of swivels that keep a strait 3/8" diameter through the entire swivel? Thanks!!!!!

@thedirtywork 3 года назад

Just did a random search on this topic to make sure my thinking on these steps was correct before I started wiring and mounting. Cool that you had all the same pieces but I’m adding a flashing light also. Great video and enjoyed seeing the boards on the wall!

@allproexteriorservicesllc5338 3 года назад

Awesome!!! I thought about adding a light, but most times I cannot see the box. The boards are from my younger days!! Good times and ride every now & then. Thanks

@thedirtywork 3 года назад

@@allproexteriorservicesllc5338 Yeah I don’t think I’ll be in line of sight of the light either but if didn’t get it I’d think about every time I am in sight of it!

@rickwashek478 3 года назад

That's the most efficient set up I have seen. I am going to do the same set up for this year. Thanks for sharing.

@allproexteriorservicesllc5338 3 года назад

Thank you!!

@palmtree8604 3 года назад

🌴 love the sk8 boards on the wall🌴

@bradthomas7179 Месяц назад

Hi, my remote receiver is tripping when I hit the on button on the remote. Any thoughts?

@allproexteriorservicesllc5338 Месяц назад

It sounds like a short on the power cable. Thanks

@bradthomas7179 Месяц назад

Cool thanks!

@cfmill74 9 месяцев назад

Do you prefer this over a remote downstream bypass injector?

@allproexteriorservicesllc5338 9 месяцев назад

The remote DS bypass would be a better option. This box is more budget friendly. Thanks

@cfmill74 9 месяцев назад

@@allproexteriorservicesllc5338 thanks!

@HouseWashingRick 3 года назад

I can't wait to get my box and start using it

@HouseWashingRick 3 года назад

How does the ball valve get rinsed out after pulling sh ???? And does the chemical injector get rinsed out still

@davianjustinescherer 2 года назад

Subscribed .. THANK YOU SO MUCH!!

@allproexteriorservicesllc5338 2 года назад

Anytime!!

@Hamrickshighpressuresolutions Месяц назад

I just made the same one. Do you happen to have a video of it in action on a job

@Hamrickshighpressuresolutions Месяц назад

Great video

@allproexteriorservicesllc5338 Месяц назад

There are some videos after this one where the box is in use. Works great for the price. Thanks

@geauxbro7 2 года назад

That's one of the coolest things I've ever seen honestly, I HATE walking back and forth to pull and drop my stick. I'm gonna look into building it myself but if u sell them, we live in the same state so shipping shouldn't be much 🤣🤣

@allproexteriorservicesllc5338 2 года назад

Awesome!! Let me know if you need some help with the build. WHO DAT & Thanks

@geauxbro7 2 года назад

Hey man, you still using it today?

@jacobwinchell8521 3 года назад

Nice build, thanks for sharing the links!

@allproexteriorservicesllc5338 3 года назад

You are welcome!! Thanks

@tonycalabrese8438 3 года назад

Thank you! This helped me out so much!

@OutlawXOutdoors 3 года назад

Im currently setting up my trailer, not near to what you have, but this video helped me a lot . Definitely subbed. Wavin at ya from Thibodaux

@allproexteriorservicesllc5338 3 года назад

Awesome!! Let me know if I can help & thanks for watching!

@symplemynd57 3 года назад

I just found your videos and must say they are great. I love the build of the remote box. Something that's been burning in my brain for a while and to realize how "stupid simple" it is blows my mind. Good things come to those that wait, like I said, its been on my mind for quite a while. I like that you mention Joe Deery in Ct. I built my truck almost identical to his except I have the GM version. Again, great videos and welcome to my subscription list....👍✌

@allproexteriorservicesllc5338 3 года назад

Thanks for subbing and glad you like the content. If you need any help with the remote box, let me know & JD is good people.

@symplemynd57 3 года назад

@@allproexteriorservicesllc5338 i ordered up the parts today and should have them on mon-tue. Did you use the brass or stainless? I went with the stainless for a few bucks more

@travisking4390 2 года назад

Awesome video. That is so help full. I like the Davis shooter tips and use one right now too, but I think I am switching to a stainless steal one next year. The Davis ones are aluminum and go to crap to fast, and the steal ones that last longer are the same price practically.

@allproexteriorservicesllc5338 2 года назад

It does wear out. I have not been using it much since I added the AR45. Thanks

@ChristopherMaier. 3 года назад

Excellent bro 👌🏽 Much love from Australia.

@allproexteriorservicesllc5338 2 года назад

Thanks!!!

@Syphyllchris Год назад

The reviews on Amazon say that this valve is garbage... soooooo I mean what's the verdict

@allproexteriorservicesllc5338 Год назад

It really depends on if you clean it out after every wash. I have had them last a year. The Banjo valve is much better but 3 times the cost. Thanks

@perezleolp Год назад

Very good video bud...I'm trying to hook up a 3 way valve wood the wiring be the same the one I got coming is 3 wire

@allproexteriorservicesllc5338 Год назад

It should be close. Not sure of the connections on the 3-way valve. Thanks

@perezleolp Год назад

@@allproexteriorservicesllc5338 I think I messed the valve says it works with 110 through 230v AC

@JDMSoftWash 3 года назад

Just got mine done works great thank you.

@allproexteriorservicesllc5338 3 года назад

Awesome!!! Make sure you rinse it after every use.

@JDMSoftWash 3 года назад

@@allproexteriorservicesllc5338 thank you so much.

@pressurekleen337 3 года назад

very nice thanks

@jamesriverish 3 года назад

Great video, thank you for posting

@allproexteriorservicesllc5338 3 года назад

Thanks for watching!!

@michaelfalgout5564 Год назад

How did this work? Are you still using it?

@allproexteriorservicesllc5338 Год назад

It is still on the trailer but have not used it much. We have been using the AR mainly. Thanks

@dcsc4895 2 года назад

LOVE this channel homie.

@allproexteriorservicesllc5338 2 года назад

Thanks DC!!!

@stevenwest1025 3 года назад

Amazing thanks for the info ! Total game changer!!!

@allproexteriorservicesllc5338 3 года назад

Anytime!! Don't forget to rinse the valve and cycle the valve when rinsing. Thanks!!

@franciscomaldonado5724 2 года назад

Good video good information

@davyonedickerson1786 5 месяцев назад

Will this work with a ar45

@allproexteriorservicesllc5338 5 месяцев назад

I would recommend a 3-way for the AR45. You may be able to use this style in 1" on the SH valve, but then you would also need one for the soap line. Thanks

@davyonedickerson1786 5 месяцев назад

@@allproexteriorservicesllc5338 I just brought a 1in 3 way wat else do I need

@ckohl9760 2 года назад

Could you also use a 3 way valve so that when you click the remote you are just switching back and forth from sh to clean water? Yes you would have to run two lines from the ball valve, one to clean water and one to sh tank. That way every time you rinse it also rinses the injector.

@allproexteriorservicesllc5338 2 года назад

Yes, that would be the ideal solution. The challenge is finding a 1/2" 3-way electric valve. Thanks

@blakenasser7166 Год назад

Do you still use this or do you have a flo pro now

@allproexteriorservicesllc5338 Год назад

We use the AR45 for house washing now. But it still on my trailer. Thanks

@bradthomas7179 3 года назад

Nice thank you!

@allproexteriorservicesllc5338 3 года назад

Thanks for watching!

@bradthomas7179 3 года назад

@@allproexteriorservicesllc5338 you building them and if so how much?

@joeybabineaux8018 2 года назад

I would love to see how the valve system is connect to your HP hose reel and or hose. I purchased all the parts in your description links. Just missing that one pic, Thanks.

@allproexteriorservicesllc5338 2 года назад

If you can hit me up, then I can send you a pic. Thanks

@powerfulimprovements 2 года назад

Life saver!!!

@user-cp4lo8zl2t 10 месяцев назад

You spent under $100? Excellent work

@allproexteriorservicesllc5338 10 месяцев назад

Thanks

@Mr10isfreak 2 года назад

Good stuff!

@allproexteriorservicesllc5338 2 года назад

Thanks

@DIVEBABY64 3 года назад

Can you post a video showing the injector modification. ( taking out the ball and spring etc) Thanks!! I am so enjoying your videos and thanks for saying guys and gals!!! We are out there washing and learning too. Lol😜

@allproexteriorservicesllc5338 3 года назад

Awesome!!! I have not got my check valve yet. I plan to modify my general pump injector as soon as I get it. I will post a video hopefully soon.

@frankpirrone6032 2 года назад

My ball valve is working opposite as it should. Valve is open without power and closes when I hit on

@allproexteriorservicesllc5338 2 года назад

Try reversing the wires. Thanks

@frankpirrone6032 2 года назад

I bought a Normally open valve instead of a normally closed valve. It’s simple to convert the valve either way by just flipping the gear. It works perfectly! Thanks!

@allproexteriorservicesllc5338 2 года назад

@@frankpirrone6032 Good to know!! Thanks

@rickrouse9716 2 года назад

@@frankpirrone6032 how did you flip the gear? I too ordered the wrong one and chased air leaks through a new blend manifold and pluming trying to figure it out. I finally pulled the hoses off and the barbs and saw I had ordered the normally open valve so when I powered it to draw chlorine and soap I was actually closing it. I ordered the other normally closed one. I did not thin about reversing the gearing …

@frankpirrone6032 2 года назад

@@rickrouse9716 it’s pretty simple, here is the video the manufacturer sent me when I contacted them. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TqP3YzJaWbA.html

@blane9906 2 года назад

I see where some guys are using 3 way valves to turn on and off soap and allow them to be able to flush out their injector. However, with a remote DS box, is that possible still? I don’t see where/how you can use only a 3 way to hook up to the soap, injector and buffer tank with only 3 barbs. Do you use this or have a pic of using the 3 way?

@allproexteriorservicesllc5338 2 года назад

I do have a manual 3-way valve to flush out my injector with water. I have it connected to the SH line & water line and do the flush when done. Hope this helps! Thanks

@justinwalsh3010 2 года назад

I just put one of these together. My valve makes no sound when I turn it off, I guess I got a bad one. What do you think?

@allproexteriorservicesllc5338 2 года назад

It should make a little sound & close the valve. A couple of people reported getting bad valves. Thanks

@justinwalsh3010 2 года назад

@@allproexteriorservicesllc5338 did some research. I bought one that needs polarity reversed to close. The one I need, that is normally closed until power on is part number JFMSV00027. Maybe this will help someone else.

@chasehaertel 3 года назад

Hey Brother I'm making this as we speak. Can you show a detail picture of the wiring? Thank you so much and I love your videos.

@allproexteriorservicesllc5338 3 года назад

Chase, send me a message thru my FB account. facebook.com/All-Pro-Pressure-Washing-Accessories-104510111369317

@KevinR9763 2 года назад

I see on your pressure washer you have a bypass, did you just cut off the hose, so when off the gun the water just shoots on the ground? Do you have a video of what you did?

@allproexteriorservicesllc5338 2 года назад

My bypass line goes back to the buffer tank. Check out this video on the build. Thanks ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_hL-TUWq0kk.html

@eeiichill 3 года назад

Did you take the ball and spring out of your injector

@allproexteriorservicesllc5338 3 года назад

No I did not, but I love the idea. The ball & spring only stop the flow with a higher pressure tip. I may have to try that when it goes bad.

@srdjannakalamic5856 3 года назад

Take the Balll and Spring out use a stainless steel check valve in its place.. PM me if you like I'll send you pictures

@allproexteriorservicesllc5338 3 года назад

@@srdjannakalamic5856 Please send me details. Thanks

@nick32141 3 года назад

Not sure how long you’ve been using this for but I’m sure that you rinse it after every use from the SH. How has it been working? Any problems with the ball valve?

@allproexteriorservicesllc5338 3 года назад

I have been using for like 6 months with no problems. I know at some point the valve will fail with SH, but I rinse the ball valve every time.

@nick32141 3 года назад

@@allproexteriorservicesllc5338 Thanks

@properpreparation3213 3 года назад

Nice...Thanks! Question... the red and black wires from the battery connect to what wires on the remote valve? Or do they connect to the On/Off switch (green/black)?

@allproexteriorservicesllc5338 3 года назад

Check out my other video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lW625cq8QZc.html

@srdjannakalamic5856 3 года назад

Can you give us an update on how the remote is holding up for you. Also do you think using A38 hose Would give you more flow for chemical.. Great video thanks

@allproexteriorservicesllc5338 3 года назад

The box is holding up great. I always rinse after every job. A 3/8 hose would choke the 5.5 GPM pump. Thanks

@srdjannakalamic5856 3 года назад

Thanks

@robertgreen241 2 года назад

Is there anyway to run 2 lines 1 to SH and the 2nd line to soap? Or do you have to Bach mix?

@allproexteriorservicesllc5338 2 года назад

With this set up, I just added soap to my SH. Not sure if you could run separate line. Thanks

@robertgreen241 2 года назад

@@allproexteriorservicesllc5338 ok thank you for your reply. God bless and continued blessings

@rpcpressurecleaningandsoft2535 3 года назад

How did that work out

@allproexteriorservicesllc5338 3 года назад

Works great and still using it!!

@ecswashingtonllc5904 2 года назад

How long does it last, also will you still need the downstream bypass for stronger flow when rising?

@allproexteriorservicesllc5338 2 года назад

With the US solid valve, I have gotten 7-8 months out of the valve. The Banjo valve is still going strong after a year. You don't need the bypass, but it does help. the Flo Pro unit is set up to work with the bypass. Thanks

@dcsc4895 2 года назад

@@allproexteriorservicesllc5338 can you throw the banjo valve link up brother? is it just a 1 part swap or do i need a different motor assembly ? thanks man

@allproexteriorservicesllc5338 2 года назад

@@dcsc4895 It is a direct replacement. www.jmesales.com/banjo-1-2-in-polypropylene-on-off-electric-ball-valve/?gclid=CjwKCAjw682TBhATEiwA9crl38SkmvLbtu2mmTofgKONt9UC5H8dH5M1U4XigzSF2Kw4pax-73I8fhoC9d4QAvD_BwE

@bradrichards6107 2 года назад

Good Job, Sir. How has the valve been holding up? I am thinking of building the same set up.

@allproexteriorservicesllc5338 2 года назад

The US Solid valves have held up around 6-8 months. I switched to the Banjo valve and it seems to be holding up better. Thanks

@michaelgordon3890 3 года назад

Did you have to use a relay

@allproexteriorservicesllc5338 3 года назад

No sir. Did not need the relay with the two wire ball valve

@bryankaczmarek6943 2 года назад

How would you add a light to this ?

@AutoDudes 3 года назад

Is this still working good for you?

@allproexteriorservicesllc5338 3 года назад

Yes sir. Thanks

@AutoDudes 3 года назад

@@allproexteriorservicesllc5338 thanks for the reply, just bought it.

@J7innovation 2 года назад

How much for you to put it together? Thanks

@allproexteriorservicesllc5338 2 года назад

I have not been building them lately due to time. Maybe in the winter if it slows down. I will let everyone know. Thanks

@waytruthlifedisciple 2 года назад

@@allproexteriorservicesllc5338 I'd be interested if it's pretty soon.

@jeffellis7348 2 года назад

how is holding up since youve had it a while now? thanks

@allproexteriorservicesllc5338 2 года назад

It is still on the trailer & doing well. Just note I did change from the stainless to the poly valve but worth the extra expense. Thanks

@jeffellis7348 2 года назад

@@allproexteriorservicesllc5338 Thanks for the quick response.

@rcl700 3 года назад

Are you using 18g wire to power the box?

@allproexteriorservicesllc5338 3 года назад

I am using 16 gauge wire. Thanks

@rcl700 3 года назад

@@allproexteriorservicesllc5338 thanks Sir

@HouseWashingRick 3 года назад

Sir I have all the parts in your video. Do I need to buy any wiring to get it started. And what will it cost if I mail it to you to put together for me ???

@allproexteriorservicesllc5338 3 года назад

The only wire you will need is from the battery to the box. You can use a 16 gauge 2 conductor wire. I do build them if interested. Thanks

@HouseWashingRick 3 года назад

@@allproexteriorservicesllc5338 if I mail it will 150 cash would that get it built plus a extra 20 for shipping

@allproexteriorservicesllc5338 3 года назад

@@HouseWashingRick Sure. Let me know.

@HouseWashingRick 3 года назад

@@allproexteriorservicesllc5338 I can mail it to you first thing Tuesday morning if you like

@HouseWashingRick 3 года назад

@@allproexteriorservicesllc5338 actually I'm waiting on the on off button that's only thing I'm waiting on from Amazon should be here Tuesday.

@jasonward627 3 года назад

Dose it matter on GPM with this?

@allproexteriorservicesllc5338 3 года назад

No sir. Should work with any GPM that uses an external injector. Thanks

@jasonward627 3 года назад

@@allproexteriorservicesllc5338 Did you run the main power wire to your pressure washer battery or do you have a separate battery for this? Thanks aging for your help.

@allproexteriorservicesllc5338 3 года назад

@@jasonward627 I run the to same battery for my pressure washer. Thanks