DIY Shoe Storage Bench | How to Build 

Uh....what!?! This is great. Didn’t follow any of it. I have none of these tools but still watched the whole video. Nice job!

Great video and plans -- I made this for my daughter - she loves it. I used a bamboo top from Lowes (had left over from another project). Made it a bit taller and put 3 adjustable shelves. Thanks for this one!

Making this guy today. Got all my materials ready last night. Love the plans.

Nice build en well done on editing the video! Respect for not cutting out the screw-ups you've made and actually showing solutions to the problems you've encountered. Keep it up! Greetings from Holland.

Awesome project, Brad. This was a really nice one, love the contrast of the Walnut top and painted base.

Great build and very functionable. like the contrast of walnut and white paint.

I need a storage bench for my office to hold a rackmount server and MFP. Your bench is similar in style to what I'm looking for and I think I that I can adapt it to what I need. Thanks for the inspiration!

Been binging on a lot of your videos lately and noticed a certain design and build style, which is clearly working for you and I like for it's simplicity. This project came out great, and that walnut with sapwood made the final piece truly unique. Others would have cut away the sapwood for a uniform top for a result that wouldn't look much different than something off Wayfair.

Found myself fast forwarding though this video. Nothing wrong with it, but I couldn't wait to see the walnut as the finish went on. Always satisfying that! Nice, practical piece of furniture. Walnut on white always works.

Looks cool and I like the contrast of the walnut top! Now my wife wants one built

Thanks for this video. I have build a shoe cabinet for our house based on it. I only had a jig saw to cut the plywood so you can imagine that it was quite a project 😊. Only my third one but I love the result.

Now to get the kids to put the shoes in the bench! Kreg makes a single hole pocket jig that has lip on it meant to help push the precut plugs in place. Nice build!

Dude. Was doing a quick look around the web for some inspiration for a shoe bench. Stumbled on this and didn't expect to find this level of craftsmanship but so glad I did. Subbed.

Safety tip! when putting wood through a planer don't wear gloves. I used to until one of my gloves got snagged on the wood and nearly pulled my hand in. in any case awesome video!

Amazing. Just getting into wood working and your channel is exactly what I'm looking for.

The LOZ Tri-Force 🔥🔥🔥

Good work mate looks amazing I recently made a shoe rack for the neighbour next door she's a bit rustic but I like it all out of scrap of cuts and pieces of donated timber it's heavy because I used all hardwood luckily it won't be moved around to much plus it also doubles as a seat as well keep up the good work cheers

What a great project, I am going to make this for my in-laws. Great video, thank you so much!

Your're a pro!! a shoe rack for generations to come!!

And I thought I had a lot of tools... Man, I love your setup. Nice work!

That top looks amazing! The bevel was a great idea and really adds to the look!

the imperfection on the cuts are great for DIYers. probably makes them feel more comfortable if they don't cut as clean or great as Bob the Builder hehe

The small kreg jig you had on the bench while hammering the plugs in has a recess on the bottom to drive those plugs in. Kreg actually sells the plugs too.

Your projects are always so satisfying to watch. Keep up the great work .

Is there anything you can't do? One word for you sir PERFECT.

Brad that's awesome. Great job. The top looks amazing when you put the finish on it.

I've always loved Walnut... Nice job.

Liked the video. Very practical. Also perfect project for those smaller pieces of fine wood like walnut, cherry and oak. Thank you for making and sharing your video.

I love practical projects like this. Very well done.

LOVE IT, NOW GOING TO MAKE IT FOR MY DAUGHTER. THANK YOU.

This is the project that made me click that subscribe button. My wife wants something like this, and this I can easily build. However I do not have walnut that thick. Off to Canadice NY, and hopefully the guy has some. Although I have some maple that is that thick.

Great Build and that Walnut really looks nice on the top. Well Done. Barry (ENG)

just finished mine one minor difference, the top front an rear runners where made the same height as the rear. I then added a bottom the area between them an instead of screwing the top down I added a couple hinges. Makes for a nice little storage area for gloves an mittens. I also added holes to the rear runner an bottom to allow air in when wet items area put away in the storage

Hi Brad! You can use the bottom of the pocket hole jig to push the plugs into the hole.

Great project! Great tip on the pocket hole plugs. Looks great!

Super! You learn many things applicable to many projects. So valuable. Thanks.

This was a great build, you made it seem so routine. Thank you, I'm glad I found your channel

I just got done building a storage container for my pocket hole jig! You make such amazing projects and you really inspire me. You deserve way more subscribers so just keep on going!

I like walnut sapwood. Thanks for this vid!

nice, I need to make one but I'll have an upright section for coat hooks and some cubbies or something above that.

inspiring.., especially now that am setting up my small DIY workshop.

Great project, me and my son love watching your videos!

Brad, I found your channel today and I must say I like your style, and love your well equipped shop. I've been around for a while and may chime in every now and then to share things that have worked for me in my quest to improve my hobbies. I just watched all six of your basic turning videos before this one, all good. The main thing I noticed is your irregular use of your face mask. Seems like you trust the vacuum to take the sanding and cutting dust away from you when in fact you should ALWAYS wear your breathing protection when cutting and sanding. There will always be some fine sawdust escaping the vacuum hose, this will accumulate in your lungs with no way to get it out: on the long run your lungs will suffer dearly. Be safe and keep the chips flying.

great project especially if you have all the saws!

I like that this video/ project use tools most diy hobbyist have. A video series of projects with tools that are more accessible for diy would be interesting to watch. Just a suggestion as someone with limited tools to use for projects, love the videos and inspiration to start my own projects. 1:24

Great project Brad, I've just finished making this a week ago and it's has turned out pretty great. Makes such a difference to coming into the house with a nice tidy entranceway.

This is insanely nice and very well made, just not sure if it qualifies as diy. I own 1 of the 20 tools used lol. Interested as a customer though

Wow!!! excellent job making the video and project. You're a true craftsman.

If only i had these fancy modern machines !

I just built my own version of this based on your design. Wife is now happy 😅

Great walkthrough and technique that can be applied to many other projects

Way to nice to put shoes on....Great job...........

looks great, nice job Brad!

Very well made brad,you do great work

Great job Brad

ouuuuuuuuuuuaaaaaaaaaa SUPER merci pour la vidéo franchement encore un Génie de plus du bricolages comme j'aime a bientôt pour la suite des vidéos .

Pretty awesome shoe storage bench, I learn a lot , thank you.

Fantastic craftsmanship!

Don't we all learn from those mistakes? Great build man, love the top!

Just finish building this thanks for the plans

Great work mate, your workshop is so tidy n organised keep up the good work.

Beautiful! Thank you for sharing!

Really nice video. Good organization and easy to follow. Even if I don't have half those tools!

Love this project, love your setup 😊

Very nice build!!! I don't have near the tools or equipment so it'll probably take me a month, but I may try to tackle this myself!

your videos are so satisfying

incredible brother

Great work man!

Great job. Thanks for taking the time to explain what you were doing in detail. Subscribed.

Smart idea.

Very nice, i´m gone do exactly same bench like this.

that walnut look nice nice!

Great! I was looking for a weekend project..

Good looking bench Brad!

This is nice, im looking for designs for a tv unit with a sepele top, this is pretty much bang on

Thanks, great video, enjoyable. Johnny

Wow..... fantastic work!

Sweet design man! Can’t wait to get a miter saw and a table saw. Nice triforce btw!!!!

next use a rasp plugs go in easy. great job looks awesome

You keep your shop so clean 👍

Bought your plans and just started this today!! Qq for you, what shelf pins did you use?

OMG - this is so great. I've been looking for a clear and concise way to create some for my bathroom. You Rock! 5:53

Very nice

Looks awesome; great job!

all details perfect, I love it

Need to build this so bad!!!! The entry way at my house looks like a shoe store exploded. This project looks like it is actually something a mere mortal like me could possibly do.

Lovely work, thank you

I love this man...

Muy buen trabajo y buena idea,pienso hacer lo mismo,saludos hasta Nashville desde Mty. MX.

Love it ! looks great mate! From the land down under

This looks awesome! 😀 Nice job! 👍

nicely done! congratulations!!!

This is awesome, Brad! You are awesome as well.

Nice tidy build. Thanks

It looks very nice !

FYI your kreg mini has a place on the bottom specifically made to push in pocket hole plugs

Excellent fun to watch!

Awesome build, nice shoe rack 👍🏾

this is a very nice piece and that top is so beautiful. the trim on the sides is a nice touch also. Just found your channel and subbed because of this video.

Great build!