DIY Side Yard Gate Remodel 

The moment you see what kind of beast this gate is guarding...

This is a valuable addition to my woodwork collection ru-vid.comUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

Love the way it came out. Very good way to reuse the original gate and turned it into a beautiful piece !

I held my breath while you were grinding off tabs from the latch, with your toes right next to the grinder!

“Ideally I would have gotten black screws, but they were not readily available”. Me looks at screws, looks at can of black spraypaint.... I see a solution.

They sell a quick strip disc for grinders at home depot. Makes quick work on removing paint from metal and leaves a smooth surface for painting

Late to this. Watching you work through the problems should be inspiring to others. Not many people can do that today.

The gate is amazing, almost as amazing as that cute puppy!

I feel like you had a very enjoyable time making this. I found it extremely theripudic to watch! Thanks for sharing your boss mode remodleing, it makes me feel inspired!

I’m renovating my families kitchen by myself at the age of 19. It’s fun to do that while watching your videos, I need all the motivation I can get haha

" this space is going to be turned into a dog run" me:ooh must have a big doggie. End of video shows itty bitty pupper. Me: even better

OMG...this is ingenious! I never thought about using wood slats in an ordinary metal gate! Thank you so much for this video. I'm totally going to do this!

WOW! I thought you got a whole new gate....had no idea you used the same gate and upcycled it. What a difference! So glad I came across your channel....binge-watching it all now! You are very talented!

Well done - looks like it was a labor of love and it paid off!

Hey that was an awesome tutorial! Side gates can be expensive but a DIY project like this one will save you money for sure. Just have to have the right tools and investing in such can also save you time and agony! Thanks for sharing!

Damn! Just damn! Now if you could get those bricks to match that chocolate color on the gate, priceless! Flipping nice.

Thanks for the video it was beneficial for me to add this to my side gate.

I would put a kick board along the bottom on the inside. This will stop the dogs knocking the bottom slats off and also allow you to close the gate with your foot, if your hands are preoccupied.

I somehow stumbled o to your channel and I like how humble you are. After seeing how the screws looked, I would have pushed them into some cardboard and spray painted the heads black to match the gate.

Planning to copy this technique. Exactly what I was looking for. Thank you sir

Nicely done. Looks great, what a change. Very creative.

I need to binge all of your videos at least twice.

Kick Rocks! I Love My Grandma! Switch Back!

Nice job, Maverick!.. it really was a great solution.. props to you!

Outstanding. It took lots of planning and hard work.

You’re pretty good.....not bad, not bad at all.

best thing of the gate is the security guard at the end of video ........good job buddy!!!!!

I think it would look a lot classier with the screw side facing the inside. 🤩 But you did a beautiful job and it’s an awesome idea to use tongue and groove boards! Great choice of stain color too…Thanks for the video and instructions!

Very nice gate...specially that you started with an old gate....

That gate looks amazing Ben!

Exactly what I was looking for. Thanks for making!

Baby Doopy is soooo cute

It's incredible how many things you did that were either absolutely unnecessary or just out right wrong !!! Especially the fact that you put the latch on backwards !!!

I know America doesn't really use brick and cement to build houses, but I'd have thought the concept of anchor bolts would have reached the continent by now... Or at least the notion that bolts can't directly screw into brick ;) Great looking fence though!

Puppies always cute

That looks very nice

Good job...color matches your walls too...👍🏻👍🏻👍🏻

Awesome work & the dog is so adorable

The gate is awesome.

I keep on looking at this video, an inspiration!!! Keep it up Bro!

Great video and project shows off how much effort / time had to go in to it and for the 107+ thumbs-down-losers - NO ONE is going to copy his exact methods & techniques. Obviously, anyone with wood/metal experience knows there are easier ways to achieve the same results.

Came out amazing. Great work and patience!

"Ancient" - The moment we folks from the old turf spit our tea in a burst of laughter.

7:26 nice job bro!, 9:16 roach in the map, 15:38 checking the chipped board, 17:56 stylish

I like the part where you kept your toes at the end.

Great job man! Gate looks good!

Great project, and a well done how to process.

That little doggie is soooooooo adorable cute precious and gorgeous......❤️❤️❤️❤️❤️❤️❤️

Beautiful job done👍 and the puppy😍😍😍😍 I just love it😍

Really nice job on the gate dude, and your Corgi is the best

Great job 👏 👍

Good idea bro 😎 👍

Looks great man!

Wonderful job. Love your puppy. Sweet.

Awsome looking frnce...great job. The puppy is just adorable 😍.....

The gate is good and looked nice

Looks good

Amazing Look nice and different

the gate looks fantastic but oh my gosh your puppy is so cute

Gate looks good, but that brick wall… is HIDEOUS‼️👍🏻😎

Adorable gate but really adorable doggie.

My friend you did Amazing. I am doing the same job. It would have been nice to have added the material links but you did enough work. Thank you very much.

Job well done

That’s an awesome gate!

Great job ... But The puppy it's so adorable !!

...and the puppy is too stinking cute!!

Nice work young man

Love it! Looks great!

Wait... you had a grinder. In the future you can get cut off wheels. That would have been easier then the saw.

More Cowbell! Thanks for the inspiration.

Paint that flakes in sort of rectangular regular blocks like that often contains lead.

A black sharpie on black paint loving it

Great job looks great

Love watching your vlogs.New subscriber here.

Those iron scroll decals really scream "GRANNY!!"

only problem i see is handle is on wrong side. to open the gate, you should be inside your property. so Unless you plan on putting a Padlock on it. Anyone that wants to like see whats on other side can easily open the gate up and go in. so yeah.

Wow.! Looks amazing

Great video bro! I have to do this soon to a huge gate 🤦🏻‍♂️

Since the top of the gate was aligned with the top of the wall, the latch could have been installed on top of it.

Next time is Diablo blades when you sawzall steel as they are the best. We use it in our pluming company and nothing else. A Milwaukee sawzall is powerful

Te quedó excelente ese trabajo, quedé fascinada. El perrito super hermoso.

Nice work I hope you add lock outside for safely. I was aww at this cute puppy. c:

Bro, SAFETY GLASSES!!! That grinding disk, if it breaks, will go right thru your dollar sunglasses and hopefully won’t go too deep into your skull, a full face mask is recommended!Grinders do bite, I would recommend steel toe boots if your using your foot as a vise, just saying. Invest in high quality tools. Invest in high quality products. Love the “ can do “ attitude, I hope you used stainless steel screws. Keep up the learning, nothing to it, but to do it! Love the puppy!

Loved your work man! Recently a bought a house with my wife here in Chile (southamerica). The house isnt in a ver good chape cause it was a little left (sorry i dont know the exact word for abandonada in english). Anyways, im starting my own house proyect in order to modernize all the gates. I loved this style witj hoziontal wood and steal and im gonna watch your videos many times to get ideas. Hehe. So.. Great work!

Good job for a city slicker 😀

Nice work , i love your dog

FYI... weld - join together (metal pieces or parts) by heating the surfaces to the point of melting using a blowtorch, electric arc, or other means, and uniting them by pressing, hammering, etc.

Did a great job on that gate Ben!

Cringed when that grinder was so darn close to chewing up those sneakers...and laughed when that branch denied you passage.... 'you shall not pass'....awesome job, counter sunk screws are probably what you were looking for...great job

Nice job Ben, but to fit the latch, a masonry bit, Rawlplugs and s/s woodscrews. Really easy. Regards Jim UK.

what kind of wood you used? It looks amazing!!!!

OH MY GOD THAT DOG IS SO CUTE

Back in Dec 2019 I guess you did not know abought Tapcon Concrete Screws.

Looks really good thinking of doing something like this to my driveway fence I currently hate it but don’t want to spend thousands on something replacement

Yes it's looks pretty good

Beautiful job!! OneLove.

I think the gate would look even better if up spray painted the brick wall a different color. Maybe white?

Beautiful Job thanks !!!

Nice

Looks good, great job 👍🏽