DIY Storage Solution With A Secret (You Won't Believe How It Works!)

Подписаться 567 тыс.

Просмотров 535 тыс.

50% 1

How to put 20 feet of cabinets on 9 feet of wall! I couldn't afford the ultimate storage cabinet for my garage so I built it. This is the ultimate space-saving storage solution ever! You won't believe how this storage system works and how much it will hold. If you need garage space then you need to build this cabinet. I built mine for a fraction of the cost of the inspiration storage cabinet. I saved $5,000. Be sure to check out my garage makeover video where I saved thousands more!
🔥 Get Your HAXMAN shirt here 👉 bit.ly/3lF53tG 🔥 Every purchase feeds my kids! 😄
Epic Garage Makeover: I Saved THOUSANDS By Doing This! • DIY Garage Makeover On...
Building The Ultimate Chicken Coop • DIY Chicken Coop Has S...
I Built A Micro Camper That Goes Anywhere! • I Built A Micro Camper...
A DIY SMOKELESS Fire Pit That Actually Works! • The DIY Smokeless Fire...
I Built a Tiny House For My Daughter's Rabbit But.... • We Were Supposed To Ea...
Strut trolley amzn.to/44wpquR
Aluminum plate amzn.to/3yad5AD
Metal base for 4x4 amzn.to/3y6ErI1
Wall Control Pegboard amzn.to/4dkFUdE
I hope to inspire you to create your own projects at home. If I can do it so can you! I want you to know that you can accomplish anything you set your mind to. Learn how to become self-reliant and have fun doing it!

Хобби

Опубликовано:

2 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@HAXMAN 20 дней назад

You can feed a HAXMAN child by purchasing merch here! thehaxman.com/

@hongtanke 20 дней назад

add a foot switch for power.

@adamedwards4305 19 дней назад

I will feed a child if you make your voice louder than the tools in all future videos.

@dallasarnold8615 17 дней назад

Good job. A couple of points for others. Instead of building the ends as post, just build the ends as shelves with post in the corners, as there is no real need to move either of the two end sections. Also, by putting a backing panel in the middle ( or offset from center ) you can make the sliding sections double faced. And lastly why not dado with the dado setup you already have on the radial arm saw ? That being said, it is still a nice project as you did it.

@Jutulind 17 дней назад

@@hongtanke - exactly the same I wanted to post just now. Foot pedal for power or doubled emergency stop would eliminate the problem. "high tech" solution would be auto cutoff if RPM = 0 & Power != 0 & t = 2s. Also easy to do but not as easy as two first methods.

@djt7387 16 дней назад

Nice work, I think this systems been in our heads for a while.. makes you think though, couldn't you just fit that all on the wall?

@robthewaywardwoodworker9956 20 дней назад

Great build. You could save even more by making the 2 end units stationary and they could hold the whole assembly up. No need to have them slide unnecessarily. Just a thought.

@HAXMAN 20 дней назад

That’s true. It would save a couple hundred dollars.

@brianb9410 18 дней назад

I would never have thought of that. Excellent improvement in many ways, more stable, easier to build shorter span for trolly track might not require metal tubing support.

@jonathonhoogland9446 17 дней назад

@@HAXMAN Each sliding unit could also have shelves on both sides, cutting the trolley cost in half.

@ErikTroyer 17 дней назад

Likely cheaper still to just have fixed wheels on the bottom for 2 units with front and back shelves and then 2 single sided units on each end. Resulting in 3 different openings of shelves either side.

@jum5238 16 дней назад

@@ErikTroyer Great idea! And possibly some very low profile track to keep them aligned side to side.

@savvykronik4192 6 дней назад

Shout out to the wife for being the patient camera woman! Most underrated thing of the episode. 😅

@rcat32 5 дней назад

I'm 72 and I wish I had a man or son -- or woman or daughter or anyone -- to make this for me! Great job! 👍

@crocop2o12 4 дня назад

It's not that great, you need to slide them everytime you need a simple tool and remember in which rack they are. Just fill a wall with all your stuff and done, costs nothing and you can see all the tools, if you want them hidden, use a sliding carpet, lol. Costs 50$ instead of 1500$

@chrishubbard5073 4 дня назад

Could the hanging shelves be 2 sided? Then you could have fewer to move around but the same amount of storage

@rp9674 3 дня назад

Thank you cheap Chines stuff

@troyelder56 День назад

@@crocop2o12you apparently missed the point this is storage not a work bench or common use tool wall. It takes tons of shelves and compacts them into a tidy collapsible area. And you’ve obviously never been to a library because they use a very similar system usually for their stacks and research materials that aren’t used as often. Just look up library stacks.

@DavidCardonaESM 4 часа назад

Trust in yourself, You can do it.

@thezachofalltrds 18 дней назад

This is amazing! The commercial system is so cool, but also so insanely expensive. Something we did on a similar system was take a photo of each sliding-shelf, showing everything on it, and then printed it off and put it in a small picture frame attached to the shop-facing side of each shelf unit. Makes "looking" for stuff so much faster.

@SmallSpoonBrigade 14 дней назад

You see systems like this in many law offices where they need to store a bunch of records in a small space. You just need enough space to allow for however many different parts you want to access at once. In an extreme case, you only need an extra 4' or so of space on top of the physical width of the shelves.

@wesl.946 4 дня назад

Pro Tip: It took longer to edit this video than build this cabinet. Great job on both!

@daoyang1562 16 дней назад

I would never do this. But watched the entire video because it was entertaining and educational.

@Jaji813 21 час назад

Woodworking, Yoda, bright colors, and last but not least, a sense of humor!!! :) Love it :)

@RJ-lv4yw 19 дней назад

Putting the trolley in after welding is actually an improvement. If one goes bad in the future you can more easily replace it.

@nickm9102 10 дней назад

Not sure how easy future replacement will be unless it is on the end he cut out. Now if he did a cutout about 1/3 into the track and spaced it to where he could bolt the cut out bit of Unistrut in place. Also if you don't have access to a welder for this job, It will be a pain with the 2x6s but, you should be able to bolt the two together. I also wonder if aircraft cable might be a mounting option instead of the additional plate for the slides.

@saritshull3909 4 дня назад

@@nickm9102what do you mean by aircraft cable?

@Grimmwoldds 4 дня назад

@@saritshull3909 wire rope. Braided cables made from wire strands commonly used in aircraft, but also in rigging and lifting and non-aircraft machinery.

@tonilafountain636 18 дней назад

LOL! The gorilla peeking through the door at the end was funny!

@jum5238 16 дней назад

When I was about 16, I thought I was alone in the house, and I heard something out in the garage. I ignored it, thinking I was just hearing things. Then I heard it again, so I crept over to the door (glass like that, but with a curtain on the inside). I peeked through the curtain, and this gorilla head suddenly pops up, and I nearly crap my pants while staggering backwards. My dad said the look on my face was absolutely priceless. Yeah... thanks pops.

@destmichael 5 дней назад

Thank you for sharing. Nice build. The bloopers were par excellante! Throwing in the "clearly a two person job" was a nod to all of us who understood the ladder set up at first glance. I am a girl builder and my hubby is the camera man. P. S. Nice weld, there's a learning curve.

@aaronadams1630 16 дней назад

I love building things with strut! Its one of my go-to tools. They make double sections of strut. Similat to how you welded the things together, ao anybody could have that added stability off the shelf with no welding needed. You could have built the entire assembly from the struts if you had wanted to. They make attachments for all of that and there are strut nuts that make it a cake walk to bolt the entire assembly together and then you can easily take it down or modify it if you ever need to. They even have floor mounting plates like what you used to attach ypur 4x4 posts. Super fun to watch.

@HAXMAN 16 дней назад

Thanks! Good to know.

@harmonyintegration6612 4 дня назад

Exactly what I was going to say! And you could use the deeper version of the strut so you can bolt from the inside and the trolly can slide by the bolt head with clearance.

@maryrenaud6732 3 дня назад

Too many tools and work for older folks. Perhaps prebuilt heavy duty storage shelves on wheels…back to back like this!

@Skooter-nw3cm 16 дней назад

I worked in hospital where they kept medical records in system similar to this. I had often thought how nice it would be to have my library in one. Now, it just might possible.

@damogranheart5521 14 дней назад

I like that idea!

@puresoulg 6 дней назад

Exactly 👍

@trevorgreene5059 18 дней назад

The radial arm saw brings me back to my first year carpentry class in high school, back in '98 or '99, and the teacher warned us that the radial arm saw will kick back. He can hear when it happens, but for us whom are all deaf, we have to go by the feel. I was cutting some solid oak plank - maybe 12" wide I can't remember it's like a lifetime ago - and sure enough, the saw immediately tried to kick back, but because of his warning and my stance, I was able to prevent the saw from trying to chew up my hands or take out my shoulder as I was braced in anticipation of these kickback. When the saw kickback, my teacher immediately swiveled his head to check on me, and I nodded to let him know I got it.

@menchelke 16 дней назад

Was the router that got a kid in my class(I was a kid too), routered the tip of his finger right off. Held it up, it shot blood in an arc, girl feinted... shop was cancelled for the day. Good times! Kid was trying to router a bevel on a wooden yoyo so hand routering a tiny 2 inch circle.

@trevorgreene5059 16 дней назад

@@menchelke My teacher once relayed a story of this stupid kid who was trying to show off how strong he was by trying to stop a table saw blade with his hand. Tore up his hand. Ever since that instance, the shop teacher is the only one allowed to run the table saw.

@thirtythreeeyes8624 6 дней назад

@@trevorgreene5059 And I thought the yoyo story was stupid. Grabbing a saw blade doesn't even compute as to how a human being that dumb made it past childhood.

@dra896 2 дня назад

How many of you saw the trunk monkey? Good build. only recommendation is the center shelves can be 2 sided.

@SouthernStyleDIY 3 дня назад

Those rails and trollies have so many different applications! Plus, not having the casters frees up a little space underneath if you ever need it for material or something. Fantastic work and really appreciate the cost breakdown as well! You're killing it!

@mfman2 3 дня назад

That combo of storage space and organization potential hits so hard.

@whochecksthis 18 дней назад

I still have my dad’s craftsman radial arm saw. It is connected to 240V, and NEVER stalls like that.

@AlexeiTetenov 15 дней назад

I like the color coded shelves idea in the comments. I would also make labels to put on magnets, of what is on each shelf, onto a small steel plate on the visible side of the shelf. When you move a tool, move the magnet/label to the shelf.

@mikelastname 15 дней назад

During college, I used to work summers in a saw mill. They had a 24" pendulum (swing) saw which was terrifying as it was belt driven and the off switch was a couple of steps away. The guy who normally worked it has one bicep twice the size of the other, and a slip up could launch the saw blade at your chest, so you had to respect that saw. The radial arm saw I used had a rotating head and I would rotate it 90 degrees and run a gang blade to rip boards into 1" stakes for mine surveyors to use - The push stick was a broom. Amazingly I still have all my fingers!

@danielshoemaker4935 20 дней назад

hope you didn't get sick after welding the strut to the tube. Welding galvanized metal requires good ventilation to prevent breathing in the vaporized zinc. It will make you feel terrible for a few days. Project looks great though. I'll be building something similar in the future.

@drbachler 12 дней назад

If you do get sick, make sure to drink a lot of milk.

@alanbowen6213 День назад

you should also save money by getting the green painted version over the galvanized

@jimthompson9992 20 дней назад

Have to say, Haxmeister...damned impressive! As an old time maintenance electrician, love that you used one of the best inventions ever, the conduit rack and trolley system! Well done, young man! Very well done! Always look forward to seeing what's happening in Hax-Land with you, your lovely wife and all the young Hax-Ladies. Keep the good times rolling! Take care, be safe and God bless!

@HAXMAN 20 дней назад

Thank you very much Jim!

@damogranheart5521 14 дней назад

You forgot the gorilla!

@Jeedehem 17 дней назад

30 seconds in, I had to press the Like button. Storage will always be (for a lot of us DIYers and semi-pros) the sinews of the war.

@markbooth3066 3 дня назад

Years ago I built 'stacks' at my flat, using barn door hanger fittings to turn Spur Steel-Lok uprights and bookend shelf supports into sliding shelves. Not as sturdy as this, but worked well for the space I had, and almost doubled the accessible storage I had for books. I now use that barn door hanger in my current garage to support hanging storage chains, in front of my main storage units, so I can just slide things out of the way and easily get to the units behind them. Again, it's made so much of my overflowing storage accessible again, getting stuff up, off the floor and out of the way of the shelves they were previously blocking.

@kosherbacon8087 4 дня назад

For the Radial Arm Saw safety wise I recommend rigging up a Foot Pedal On/Off Master Switch. Like a speed pedal on a sewing machine then your hands are free to do with what you want. We've rigged in foot pedal switches on radial arm saws, table saws and on drill presses in our shop before.

@OddJobEntertainment 17 дней назад

Awesome, I'm stealing this in the future. Only critique? Add rubber bumpers so you don't mar the paint job between the racks.

@danielsullivan7541 16 дней назад

I'm really glad I clicked the video! In the thumbnail for a bit I almost didn't because I was thinking there's no way I could ever build anything like that, not gonna bother.... But you actually came up with something awesome and do-able!

@nickneal3955 6 дней назад

I need this for books. Home library here I come.

@-B.H. 13 дней назад

The Levrack system is hard to beat in a professional setting but on the flip side the design is so awesome/easy to replicate for home/personal use at a smaller scale.

@RandyGroff 16 дней назад

I actually built my own Levrack-clone last fall! Mine is painted mint green. I was able to find 12ft 7k-lbs pallet rack beams and 2 uprights on Facebook Marketplace for around $200! Built the cabinets from birch plywood and used flat steel, angle steel, and nylon caster wheels to build the trolleys that hold the cabinets. Those channels you used would have been a lot easier! Thanks for the video!

@dalekkiller 16 дней назад

So a library book archive shelf unit. Nice.

@codekeeper32 15 дней назад

Put a foot paddle switch on the power cord. This will enable you to cut the power without using your hands. Helpful for lots of tools.

@rp9674 3 дня назад

Like a book/tape vault shelf, smart. I think angle grinders are an underrated danger

@chrismaines1285 16 дней назад

What a great storage idea. I’m always improving my garage/Man Cave and would love this in there.

@glennmorgan4197 15 дней назад

10:18 When lifting something that's too heavy for your ladder, you should put one end on the structure 1st. We do it all the time with garage headers.😊

@SierraSierraFoxtrot 9 дней назад

A DIY compactus, the dream is real...

@chrisscoleri2341 11 дней назад

You could use overhead track for a gate for this too. It is substantially larger than uni-strut and uses larger bearings and trolley. It is also bare steel, so it can be welded without the galvanization needing to be removed. It might be cheaper too. I’ve used it to build a roll out system for a heavy bag. Super cool build.

@glennmorgan4197 15 дней назад

3:05 You definitely want to go a little smaller as the friction of forcing the woods fibers apart is part of why lags hold so well. 😊

@thirtythreeeyes8624 6 дней назад

I imagine the compressed wood might add a little tensile strength as well.

@asakayosapro 6 дней назад

For thick pieces of wood, the ‘slightly smaller’ pre-drill for screws is great… Not so much for smaller pieces, and/or where there is a potential for the wood to split along the grain. Very apparent when repurposing pallet wood.

@mewmew32 3 дня назад

no evidence of this, and the fastener mfrs don't recommend it.

@lyndabuchholz1216 20 дней назад

WOW I wish I could make one or more of these. These would work for a pantry or tool organizer or sewing room storage and the list goes on and on. Awesome!!

@grcunyus 11 дней назад

I would mount the first aid kit on the outside of the cabinet. When you need it you don't have the time to look for it. Great build.

@kyoko703 2 дня назад

Came here by way of a random algorithm suggestion. Did not disappoint. :-) Great use of the drone to get overhead shot. And yes, team work make the dream work.

@mabu1760 13 дней назад

Love the rollercoaster of emotions. Damaging the ceiling, probably feeling stupid and thinking "oops'' to your wife, then trolling her a bit later, already knowing there was a victory there, followed up with a clear sigh of relief and achievement. Makes me feel like I could do it myself.

@ge2719 17 дней назад

When you've got one hand on the saw and the other on the wood, your nose suddenly becomes very useful.

@fulconandroadcone9488 14 дней назад

Put a red mushroom kill switch you hit with your forehead.

@DougStopMotion 13 дней назад

Could probably relocate or add a kill switch that could be activated with a knee or foot.

@noahzinc 13 дней назад

A foot pedal seems more safe but bopping a button with your forehead sounds more fun. Perhaps have both. Also, use a switch in the pedal that requires it be depressed to engage.

@ChibiChula 12 дней назад

This build was awesome! 🤩 It could even serve for different things depending on dimensions. A pantry or a closet would be great. If you're creative, you could have something like that in a bedroom as the base of a loft bed and use two fixed units on the ends and set one side up as a desk/work area with the shelf immediately behind one end as a bookcase and file cabinet. The two on the opposite end could be a dresser/shelf plus hanging closet storage. Then any extras in the middle would be general storage. Perfect, compact solution for a studio apartment, tiny home, small bedroom or perhaps a shared kids room. So many possibilities! 😁👍

@craigchatterton4164 19 дней назад

That looks really great! Would be a good addition to my shop, so I'll definitely keep it in mind. The only two things I would add are: another 1x2 across some of the shelves to keep smaller stuff from falling out. You may open them slowly, but will your kids? And some handles on the outside to be able to move the shelves without the risk of pinching fingers.

@GLACIOUS13 22 часа назад

...pinching fingers or, smearing the cool paint job!

@jasonzitt6408 17 дней назад

1300 is still pricey but this one seems worth it. This may be my favorite one of your projects.

@nosignal88 20 дней назад

Best youtube channel for men and fathers hands down ❤

@HAXMAN 20 дней назад

Thank you very much! That means a lot to me.

@idahoman325 8 дней назад

It does seem entirely nonghey for sures ...

@chuckbrown4132 10 дней назад

I have been using a radial arm saw for over 30years . It has been my dado cutter, planer, sander, table saw, miter saw, pin router, etc. lots of accessories for it on eBay. One thing you might try on dado cuts is bring blade out and lock it, slide board in behind blade, clamp board, start, then push blade towards rear. This always puts pressure against fence and helps keep blade from grabbing and trying to move forward and bind (as you demonstrated). Also, adding t-slot channel to saw table for clamping is a very good idea(especially if you take the time to use the clamps which I always do). Hold down clamps for radial saws are available on eBay. And lastly(saw this on another RU-vid channel) have a tourniquet at every saw. Great video btw.

@judyofthewoods 20 дней назад

Brilliant idea! I've been looking at making something along that line, but couldn't decide on suitable hardware. That channel with trolleys is a game changer. An idea I came up with for small spaces: the structure could straddle a doorway so that no wall space is wasted for the access. The cabinets facing the doorway gap could hold stuff that would be needed for outdoors. The cabinets could also be hanging in front of the door when you want to provide extra security against intruders.

@AttemptMade 15 дней назад

Whoa you could actually use the conduit and trolleys to make a barn style door too! I wonder if they make conduit that also curves so that your door could recess against weater stripping.

@judyofthewoods 15 дней назад

@@AttemptMade interesting idea. I've seen old-fashioned metal curtain tracks here in the UK, shaped like miniature I-beams, which are bent into a very slight double curve near the end so that curtains can overlap in the middle. Funny enough, those types of rails use little roller hooks that are in principle very similar to the trolleys shown here, except they straddle the single beam. I've considered using them for moving light containers. I'll have to re-examine that idea.

@eileentoledoperez2476 19 дней назад

I just love your show you make me laugh all the time. Your wife is a very lucky women she has a man that works very hard for his family. I really like that idea! God bless you all.

@HAXMAN 19 дней назад

Thank you! I’m going to go tell her you said that right now. 😂

@Mike_Gray68 16 дней назад

I didn't know I needed this for my shop, but now I do. Going to borrow your idea and make several changes to make it work for me.

@N1ghtR1der666 16 дней назад

great job it looks super solid, I do have a couple of suggestions, firstly put small whiteboards on the outside of each cabinet so you can label what's in there, second would have been to color each shelf different so that you get a visual guide to what's in each draw, things like "oh, all the saws and saw accessories are in the in the red shelf" etc.

@patricksanders858 2 дня назад

We have the same system is restaurants since forever. Good of you to catch up.

@JHess 17 дней назад

excellent video as usual! if you wanted to forego the welding all together, you could always make the cabinets longer and get some rigid fixed non-swivel casters to put on the bottom and then just connect that top rail to another 4x4 wood post instead of welding. although then you wouldn't get to play with a welder :P

@johnrako 20 дней назад

I grew up with, and still own, my father’s under powered 1950 Dewalt radial arm saw. Table saws scare me much more. If the saw stalls, push the trolly back to the start and try again - but more slooowly. Keep your fingers out of the blade path and you should be safe especially if you never do a rip cut, which can only be safe if you push the material so the blade is NOT climbing - opposite of the rip.

@Kulow1 2 дня назад

Absolutely been looking for something like this for my garage and sports equipment. You did an excellent job and thank you for posting such a well done video. Even RU-vid did thier job by bringing this up on my feed.

@JS-jh4cy 11 дней назад

I need this for the library

@daves8407 17 дней назад

I have been listing over that rack system for a long time now, but I can not justify the price of it. I really like how it works and stores stuff, but again, price. Then you came along and totally found a budget DIY solution for something that works basically the same. The one change you made.....it's completely customizable to what you want. Thank you, sir! You're awesome and have earned yourself a new follower

@HAXMAN 17 дней назад

Thank you!

@theunknownknowsBYvoivod 20 дней назад

The Haxman has returned. Greetings, fellow Floridian!

@lisaburkett146 20 дней назад

What about Texas! Lol

@Terkinstein 20 дней назад

It's all about us Floridians today bud.

@matthewthompson7012 20 дней назад

North FL, the real Florida, checking in.

@Terkinstein 20 дней назад

@@matthewthompson7012 what do you mean, que tu no puedes hablar Español? even the gringos speak Spanish here in the South.

@theunknownknowsBYvoivod 20 дней назад

@@matthewthompson7012 Would that be commie Tallahassee, or commie Jacksonville? Perhaps commie Gainesville?

@ralphwiggum3134 6 дней назад

I have never seen this system, but a few years ago, I thought up pretty much this exact concept myself. I have been wanting to build something like it and your video gives some great pointers if I ever do decide to make such a thing. I'm not a woodworker and don't have the tools to make one, btw. But I'm good at figuring out stuff. One change I might make would be to make less sliding shelves but making them wider and put the backing in the middle of the shelf, thus making each sliding shelf double as two (shelves on the front and back). Great job and I love the vibrant colors.

@dennisbrown3717 15 дней назад

It’s amazing what you can cook in cast iron. One pot king!! Nice video.

@AncoraImparoPiper 19 дней назад

Ah, the old compactus. it's been around for generations but mostly used in the commercial/corporate environment.

@joshhagen4182 19 дней назад

We had the same idea! I need to make hangin trolly system.. however definitely clean off the galvanized coating before you weld.. sweet build tho! Glad to have found the channel

@BenNawrath 19 дней назад

Yeah zinc fumes are no bueno.

@joshhagen4182 18 дней назад

@@BenNawrath def not my friend

@dallasarnold8615 16 дней назад

the channel can be bought painted rather than galvanized. But your warning should be heeded.

@martymartinez5709 16 дней назад

I got rid of my dads ole craftsman radial arm saw for just that reason! You're right about the pucker factor! Great vid.

@michaelrobinson9643 16 дней назад

I work with 8020 aluminium extrusion which has linear slides and a tonne of stuff like the strut channel. Keep it in mind if youu are doing smaller projects where you want lego style production rather than welding and whatnot :).

@SongBearME 17 дней назад

It looks amazing, what I would like to add is a 1~2" spacer between the cabinets to prevent the inevitable finger crush and to make them easier to open even with gloves

@glennmorgan4197 15 дней назад

You know that you're building a filing cabinet system that's in every doctors office. 😊

@mrsducky3428 12 дней назад

Exactly!

@robertbrown8957 11 дней назад

These wouldn't make very good systems for a doctors office, they would weigh too much, I build storage systems for a living on a massive scale and they all run on tracks in the floor so they can take the weight, if your interested in looking then check out Bruynzeel storage systems.

@mediocreman2 10 дней назад

*was. Nobody uses those today.

@TheBaumcm 10 дней назад

@@mediocreman2yep, everything is digital now. The only paper files are old hard copies

@laurice8056 9 дней назад

@@mediocreman2they still use this system to store equipment and supplies in some respiratory therapy departments in hospitals. Some libraries also use shelves like these for books.📚

@chrisscoleri2341 11 дней назад

Pretty cool. This type of system is commonly used in offices and schools. I was in the stock room at the school I teach at and thought a storage system like this would be pure gold in a shop. The one at my site was built in the late 50s. The six double sided shelf sections are 2 feet wide about 20 feet deep, 8 feet tall, all hard wood with adjustable shelves. They are supported by an overhead track, and two tracks set into the foundation which look like railroad track. They roll smooth as butter because back in the day, things were well built. The linear shelf space is insane.

@stetsonou 17 дней назад

I have been searching for this video for months trying to figure out the best way of building exactly this piece! Nice work. Subscribed!

@HAXMAN 17 дней назад

Thanks!

@timc8913 18 дней назад

Very exciting to see a new Haxman video release when battling insomnia at 1 am! As always great work 👍🏼

@HAXMAN 18 дней назад

Thanks! Sweet dreams

@marciwatterson8033 20 дней назад

Oh my, this will be shared with two men who need to see this! Love this idea for crafts too!❤️

@ericb7680 14 дней назад

I hugged this video. So much appreciation, We NEED this in our basement. Thanks,!

@EliotHochberg 16 дней назад

It’s a great project, I would make one change, the front of those moving cabinets on the shelves, I would put like a 2 to 3 inch lip just so that when you slide them back-and-forth nothing can roll off and fall on the floor

@TheOtterBear61 17 дней назад

That would make an amazing bookcase for someone who has a lot of books and not a lot of room... like me.

@damogranheart5521 14 дней назад

Most Excellent Idea!

@RedWolfRun 20 дней назад

Just sent this to my husband. Our garage has been in need of a good storage space and organization for a looong time. Thank you for sharing this!

@HAXMAN 20 дней назад

Awesome! Thanks

@DavidLee-cw6ci 18 дней назад

All husbands hate this man

@RedWolfRun 17 дней назад

@@DavidLee-cw6ci 🤣

@DavidLee-cw6ci 17 дней назад

@@RedWolfRun careful what you ask for though, don't be surprised if he tells you ok but he'll need to buy $4000 worth of tools to build it!

@rubuschamaemorus46 14 дней назад

And, if you like it, why not give making it a try on your own?

@stephenellis3430 13 дней назад

Just Wow. Your vision and problem solving. The best storage system made affordable. Brilliant Job.

@janetfeathers4128 15 дней назад

I absolutely love the Ryobi green ❤

@Zero_Zero_Zero_Zero 20 дней назад

Yeah they're giving radial arm saws away on Facebook marketplace. Incidentally, pallet racks are popping up pretty cheap too, but I think the 4x4s look better.

@lewerim 17 дней назад

Ah yes, Ye Olde Radial Harm Saw

@spuds6423 5 дней назад

Classic!!!!

@GLACIOUS13 22 часа назад

I saw what you did there!

@psdaengr911 14 дней назад

Rolling aisle storage was being done with filing cabinets in the 1970s. All it took was rollers bolted under the cabinets.

@bussdriver 17 дней назад

I grew up on a radial arm saw as a kid; still have it now. Back when stupid kids getting hurt was tragic but not a reason to "never again" or sue. You just have to have that thing pull forward once and you never forget to keep clear of it. Also, generally it's best to push in to cut (like a table saw's direction)

@craigheimericks4594 17 дней назад

You have room for stuff on top of the shelves, too! Toss some milk crates up there for some extra storage!

@jessesandifer 17 дней назад

for some reason, I want a hamburger now. ;)

@paulravitsky2898 17 дней назад

I've had the same experience with the dado head, ripping and crosscutting. Scary. I believe way back Crapsman either provided or sold an attachment that provided "braking" to the carriage to prevent that sort of thing. Sasquatch watching through window.... Once again super idea!

@glennmorgan4197 15 дней назад

10:18 Consertes have got to be the best fasteners ever.😊

@jamessshep6106 7 дней назад

For the radial at saw... Make a foot pedal switch. I use a 2 outlet steel box with a 125vac rated switch that powers a high amp relay. The output from the relay goes to an outlet mounted in a single outlet box mounted to the dual outlet box.

@willaborge4824 8 часов назад

I have used my local highschool's welding class to help me with projects. They got practice and I got my project done.

@joianoel 6 дней назад

Loved your impersonations of Dana-Carvey-as-George-H.W.-Bush, and James Cromwelll from Babe! I especially appreciate that you show all the times you drop or fumble something, bc that's the kind of tool handling I do. So, it's helpful to see how you prevented your saw from cutting your hand off through careful, deliberate movements, or how items hold up to falling, or other recoveries from oopsies. ;)

@alankoz5067 4 дня назад

I've brilliantly quadripled my own storage space by burning all the stored stuff after inventing a wonderful device to reclaim the items from the ashes which I keep in individual plastic containers. At first I used metal containers, but since the stuff is already at "ash level," I chose economy over the heavier metallic storage medium. I have yet to test out the ash reclamation device, but so far everything is working fabulously!

@TroyKasper 16 дней назад

My dad was a carpenter/cabinet maker and he had one of those radial arm saws and they are some scary stuff.

@bwselectronic 4 дня назад

@Haxman you could add a foot switch to the radial arm saw then use the saw switch as an extra safety switch so you don't step on the foot switch accidentally. Or a smart plug and voice activated switch

@motsy15 16 дней назад

Clamp that wood and always go half depth first. Cool system

@johntemp1692 15 дней назад

I learned woodworking on a radial arm saw and using a table saw the first few times were major pucker factor

@davidrim8309 2 дня назад

That rocks!!! I went the other route. I bought a bunch of metal shelves from Costco and use them as pull out drawer type storage. It’s a lot messier but a lot cheaper and easier. I’ve only broken one shelf system by overloading it.

@Apodictic1 5 дней назад

Radial arm saws are great if you use them correctly. With some cuts safer than a table saw. Love my 12 inch, has lots of power. I have used mine for ripping and have had no problem. Paid $75 with a real nice Forest blade on it. My wife saw this video and wants me to build one. Thanks for sharing.

@walterpiar2859 16 дней назад

This was my first time watching your channel.I am now subscribed.You are a triple threat.Fun educational and funny

@IBIScnc 17 дней назад

Upgrades, add a 1x2 lip to the shelves so items don't fall out when sliding the units back and forth. Also, lots of labels, or plexi windows cut into the sides so you can quickly see what is in each shelf unit.

@ChrisHiblerPinball 13 дней назад

I’m glad to see you using hearing protection even when hammering. There is no return from Tinnitus. This was a really nice build. It gave me a lot of ideas. Thank you!

@davidsnyder3799 11 дней назад

Sorry. I couldn't hear you.

@michilegraham294 15 дней назад

Canadian eh! Your colours are fantastic! And the rolling storage video is amazing! I find that your communication and explanation is perfect for me! I like that you explain the tool, use, and process! I want this garage and your videos make me feel that l can do it myself! Thank you for sharing your knowledge and expertise. Yes, is Canadian love Robbie’s!