This concept can be applied in many scenarios or motorcycles. Here is the design and production of a quick release mount for the tail plate of my KLR. Below is a list of supplies and links that may be helpful.
Cutting Boards: amzn.to/3zkLRG0
7/8 Forstner Bit: amzn.to/3Nz6LFM
Forstner Bit Set: amzn.to/3NwlJfC
Loctite 243: amzn.to/3MBBNeU
8 Gallon Action Packer: amzn.to/3mwatUp
(Action packer is cheaper at REI.com, but might not have free shipping)
Home Depot Bolt Sizes and Letter Codes
4 for base mount: 1/4" x 1-1/4" Hex Bolt- "AVL"
3 for box base: 1/4" x 2" Hex Bolt- "BGR"
1 for quick release: 1/4" x 2-1/2" - "BKE"
10- 1/4 in stainless steel washers
7 Stainless steel Tee Nuts- 1/4-20 x 5/16in x3/4in
You will also need:
-Table Saw
-Jig Saw
-Vice
-Hack Saw
-11mm wrench/socket
-Hammer
-dowel/wood to strike head of tee nuts
Speed square(or similar) amzn.to/3aIG4j6
-Pencil
-Printer Paper
-Tape
-Silver Sharpie(or similar) amzn.to/3tpVmjr
-Favorite Beverage
10 июн 2022
