DJI FPV Remote V3 Teardown - Ocusync Is Gone!

Подписаться 56 тыс.

Просмотров 11 тыс.

50% 1

DJI FPV Remote V3 For Avata 2 and Goggles 3 Teardown. We make FPV,Drone and electronics related videos.
Sponsor - greyarro.ws
*** Support Us To Keep Making Drone, FPV & Electronics Related Content ***
== Support Monthly On Patreon - / madrc ==
== Buy Me A Coffee - www.buymeacoffee.com/Madstech ==
== Paypal Donate - mad_rc@icloud.com ==
== Join My Discord Server - / discord ==
** The following companies are supporters of the channel and we would not be able to make drone, electronics and FPV content without them. **
www.3dxr.co.uk - The Cube Autopilot & Drone Related Products
cubepilot.org - Cubepilot Autopilot & Accessories Website
========================
Review & Business Enquiries:
========================
If you would like to work with us on product or service you have please email us on mad_rc@icloud.com
Business Enquiries & Consulting - We have huge amount of experience in emerging technology and unmanned systems, we offer both in-house technical services and consultancy, if you would like to discuss how I can help you please email mad_rc@icloud.com
================
Social Media Links
================
Follow On Twitter: @madrc1
Instagram: ian_mads_tech
Facebook: / themadrc1
=== All music licensed by either ===
Bensounds - www.bensound.com/royalty-free-...
Harris Heller - Stream Beats - www.streambeats.com/
#dji
#djiavata2
#Drones
#Freestyle
#DJI
#Mavic
#UAS

Наука

Опубликовано:

5 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@its_generik Месяц назад

Unreal. This costs more than most radios used in fpv. Criminal, almost!

@UKDroneClub Месяц назад

We are LOVING these teardowns 🤩

@jiatan_fpv Месяц назад

So basically $200 for a bluetooth gamepad, got it! It should be possible to connect a logic analyzer to SPI bus of that RF chip and figure out what happens there protocol wise. Unfortunately it won't be possible to build your own for cheap unless the authentication/encryption keys are extracted from the main SoC..

@MadRC Месяц назад

Yep. It’s a rip off.

@ProjectFleek Месяц назад

It should have come with the full kit to begin with, with the motion as the add on. They know how to get you.

@Blueskyver Месяц назад

Super interesting, and very much appreciated. Thank you!

@lynsmith1096 Месяц назад

Good 1 Ian

@5998353599 Месяц назад

I can’t believe I paid 200 bucks for something that empty….

@Arri. Месяц назад

Your not alone 🤣

@NikiPetrovAtanasov Месяц назад

Like the dildo controller that they force everyone to get it on their shelf. After I tried to sell it for pennies and no one had interest in it I've literally trashed my in the bin, brand new only one time use.

@Todd_Gerhardt Месяц назад

Sucker's lol I got the dji fpv kit used for great deal on ebay! Couldn't be happier eith it! Honestly I'd probably buy the avata 2 if I had the cash rn lol

@leo_dron Месяц назад

I think the same

@hydros8626 Месяц назад

Aww shit, I already paid for a pre order

@anlpereira Месяц назад

Great video series. You could get a NanoVna V3 and check the Antennas VSWR as they have UFL connectors. Thank you very much.

@MrYoungspeeder Месяц назад

The main thing is that it works and it’s AWESOME!!! I’m having a blast with the Avata 2. I’ve also found that my signal strength with the Avata 2 is much stronger compared to A1. Could it possibly be that all the signal strength is focused on goggles only instead of both goggles and controller? Anyway, thanks for the tear downs. Really useful information.

@malpermit Месяц назад

I like the jersey 👍

@Quad_Father Месяц назад

I sold my AVATA 1 but do remember with the latest firmware I wasn’t able to fly anymore without the goggles connected with the rc or the motion controller. Was it communicating through the goggles integra?

@painy6588 Месяц назад

wonder if you got transfer internals to a new shell and install full sized gimbals..

@_.-._. Месяц назад

Would you do a motion controller teardown as well?

@Porculus Месяц назад

This is why people need to watch videos right to the end before asking questions that the presenter has already answered. He said that he probably won't do it because that would result in some breakage to the Motion Controller 3.

@AymericPachod Месяц назад

it's lovetoy, not motion controller

@MadRC Месяц назад

I have been trying to get into it tonight but still not joy.

@AymericPachod Месяц назад

@@MadRC I'm not sure if I'm interpreting this correctly

@jbengineering2681 Месяц назад

I sent my ne avata 2 back to dji last week it will ill have it back tomorrow hopefully they fixed the 5.8 ghz it was glitchy right in front of me.

@ProjectFleek Месяц назад

They should've slimmed the case profile and made the materials higher end. Just got the controller 3, and it's $100 over priced forsure. Compared to a PS5 controller it feels cheap, bulky, and light. The rubber on the back doesn't even provide extra grip, feels just like plastic all around. Lame DJI, Avata 2 is awesome tho, is a total rip off to charge extra to get full acro. No reason it shouldn't be much more capable out of the box. Oh, and that geo zone crap doesnt help either, FCC mode is a must.

@judeabrigo278 27 дней назад

waiting for the battery tear down 🎉

@ManAndTechOfficial Месяц назад

Radiomaster bandit cnc metal teardown?

@devaprasanna402 Месяц назад

DJI Gamepad at its finest 🎮🕹️

@Mt1Dmitriy Месяц назад

considering no O-transmission unit inside, just one signle cell of a battery etc - the internal cost of production of such device for DJI should be no more than 40$... wow, this is some remarkable margin maintained here.

@saidinesh5 Месяц назад

Can someone tell me what is the reason behind clips in the shells of electronics? Wouldn't just screws hold up well?

@SM18272 Месяц назад

Good old DJI, charging the same for a cheap 2.4 Wi-fi controller as they do for the O3 predecessor. Avata 2 looks less appealing with every new video I see.

@irhuz8683 Месяц назад

Not to worry I'm beginning to wonder if I should sell mine ...

@JohnCuppi Месяц назад

Wow. Big profit for DJI on those units at a cost of functionality that should be there IMO in case of a goggle failure or issue. Very disappointing.

@MadRC Месяц назад

Yea DJI has big margin on this remote.

@richardb8492 Месяц назад

Are these changes to DJI’s transmission system their way of trying to stop people from using their equipment like the previous DJI goggles for anything else other than DJI equipment?

@MadRC Месяц назад

No it’s just cost saving.

@richardb8492 Месяц назад

@@MadRC another serious question for you? Is there any concern about harmful rf signal exposure that close to your head. I would see more of a concern for FCC users due to their higher power output. It was discussed many years ago on rc groups but as pointed out then your radio transmitter was at your torso and your video transmitter was on the drone but now that everything on all bands are on your head surely there has to be a little concern.

@ldnwalkandfly8617 25 дней назад

Start and Stop botton doesn't work! 😮

@PsychonautFPV Месяц назад

No beer?

@RockFPV Месяц назад

Interessting Stuff, that explains why the Controller is so unbalanced

@wcw3836 Месяц назад

What do you think of in terms of latency regarding this system. If the remote controller 3 has to go through the goggle in order to control the drone. Does that mean more latency compared to to remote controller 2?

@MadRC Месяц назад

I don’t expect it to have anything that will affect users. The live feed is already 26ms so even if it added 1-2 it’s not going to be a major issues imo.

@wcw3836 Месяц назад

@@MadRC great, thanks for your reply!

@LukeMaximoBell1 Месяц назад

So if you lose video feed you also lose goggles feed? That is quite bleak.

@MadRC Месяц назад

Yep correct on the Avata 2.

@NikiPetrovAtanasov Месяц назад

Actually on Avata 1 I've had a few situations where the remote looses connection but the video is super stable, the drone didn't failsafe also I was unable to stop, pause or RTH as the remote was not available. So it's very freaky watching the drone flying forward in manual while have no control at all. Those breakups lasted about 1-2 seconds at most and then the signal and control came back. For comparsion on DJI FPV as soon I loose control or video the drone was failsafing, pausing immediatelly and then activating RTH.

@JDDupuy Месяц назад

Yet another reason to never buy this setup. Buy something you can fix and have more fun with.

@LukeMaximoBell1 Месяц назад

@@MadRC Then I'm definitely going to stick with ELRS for TX.

@matt0725 Месяц назад

I believe the remote already had worse range than the video for a lot of people before. I know for the standalone VTX’s almost everyone ends up moving to an ELRS/crossfire radio due to this

@vadimus2007 Месяц назад

Thanks for doing it! Based on your last livestream I decided to return Avata 2 before it's broken in pieces :)

@JiajuChen Месяц назад

Now the real question: why is the controller still just as expensive?😅

@JiajuChen Месяц назад

Also does it mean the overall latency can be even lower if the controller still directly connects to the drone?

@BergeronFPV Месяц назад

It’s because DJI at the root of the company stems from literal evil

@navibarra Месяц назад

Hello, do all the previous controls also not communicate with the drone? only googles? min. 6:12

@MadRC Месяц назад

No this is new to the avata 2

@navibarra Месяц назад

@@MadRC ohhh tanks ...and nice chanel...

@georgitushev Месяц назад

Surprise surprise

@oscr_zen Месяц назад

wait, this controller connects to goggles and not the drone? cant you fly the drone if the goggles arent connected?

@JoshuaLerner92 Месяц назад

Nope you can’t fly without goggles. I just tried and quad just hovers until it reconnects. Even if u have return to home set up it will just hover there. This is a bad but if your goggles die while flying especially if your a mile out or so

@MadRC Месяц назад

No you cant on Avata 2

@MadRC Месяц назад

Correct

@3Dfactory57 Месяц назад

Will it work with o3 or googles v2 ?

@BergeronFPV Месяц назад

No lol

@BoondockStryker Месяц назад

Curious 🧐 if you could teardown the DJI battery. Everyone thinks there so special. I wonder if they’re just molicells?

@neuromancer692 Месяц назад

Molicell doesn't produce lipos.

@BoondockStryker Месяц назад

@@neuromancer692 I’m pretty sure they are lithium ion batteries. There’s no way lipo’s can last that long. Besides u can’t really fly them aggressively so theirs no reason to use lipo’s.

@neuromancer692 Месяц назад

@@BoondockStryker The only time Dji used Liion in drones was for the Mini 1. They switched to Lipo for the successor. You can watch disassembly videos if you want to. There is no reason for Dji to lie about that, besides it would be illegal.

@DCarnahan82 Месяц назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QZLfzmz74XY.htmlsi=my5R4_nDmSuzKTr-

@Robocopterfpv Месяц назад

Can’t wait for the market to get flooded with barely used avata 2s 😂.

@Gaby3DS Месяц назад

Why would that happen? Avata 2 is excellent! Comunication betwen googles - Controller - Drone has been improved too, why people may want to sell their Avatas 2??

@cipri198zero Месяц назад

It won’t happen. Usually people who bought it are more than happy with it. I read loads of reviews, forums and overall with all goods and some bads, people are pleased. I see people selling the first Avata so they can buy the Avata 2. Bad choice imo considering the first Avata is far easier to fix . I hate the new frame, it feels cheaper and fragile, I don’t know why DJI is doing this to us.

@Robocopterfpv Месяц назад

@@Gaby3DS You will either love fpv and see that you are very limited by this drone and buy a actual fpv drone or you will find that its frustrating and throw it in a closet. Both paths lead to selling it lol.

@Gaby3DS Месяц назад

@@Robocopterfpv I love FPV, i assembled3 and 5 inches Analog FPVs. Avata 2 have better range, more fly time, in flight adjustable camera angle, perfect return to home function (normal fpvs are just crap), does not need a GoPro attached, real time video transmision to phone via WiFi (excellent for production works), works perfect out of the box. In exchange of what? Some agresive acro? I just dont do agresive/extreme acro. I think ill love it!

@Robocopterfpv Месяц назад

@@Gaby3DS 1. You can easily put a servo on an fpv drone and even a 3 axis gimbal with a bit more effort. 2. As soon as O4 air unit comes out you will get better range with aftetmarket antennas. 3. Ive literally never needed the return to home function because I know how to keep signal but inav and betaflight have very good return to home functionality now. 4. I want to carry a gopro its much better then the O4 unit with true 24fps a proper log profile and 5.7k 8:7 ratio. 5. You can setup an hdmi out to get video feed to a monitor and then brodcast that anywhere u need. 6. My 7inch with a lion pack can fly up to 35 mins and even at the very end of the pack it still flys better then the avata. 7. If you take a hard crash you can easily repair your drone a big no on the avata. 8. Agressive acro = putting the drone where u need it for the shot. Good luck doing anything that takes any kind of punch and aggressive flying which is literally the entire point of fpv cinematography. 9. Your not limited to whatever dji decides to give you. The whole world of fpv frames/ motors/ cameras etc. 10. Good luck doing anything different from the other thousands of cookie cutter avata pilots do

@alizuma233 Месяц назад

That looks like it cost them $10-$20 total to make. Why is it priced at $200?

@MadRC Месяц назад

Yep they have HUGH margin in this.

@technicalsupport6983 Месяц назад

What happens in this world ..... Empty remort have somany features .

@lonelyroamer Месяц назад

So, if you lose video signal, you lose RX signal at all. Great.

@Quad_Father Месяц назад

Unfortunately you’re gonna have to suck it up if you want to fly for real and not use the motion controller.

@r3d4c7 Месяц назад

I considered glueing some coins inside just to add some weight. It does not feel like a $200 remote, and now we see why (it's not)

@MadRC Месяц назад

Yea DJI is making some margin on this.

@jackevans2386 Месяц назад

13:56 "DGI" ? and we all thought they were called 'DJI'

@brandon9689 Месяц назад

Many people don't understand this connects between the controller and Goggles to eliminate the folding antenna on top. I picked this up and I am ordering an Avata 2 soon. I'm a bit concerned that one the hardware gets unlocked this radio may not work with PNP BNF's the way that the FPV2 can. If they do ever work, users will need to have both the goggles 3 and FPV 3 for bind and fly PNP drones.What do you think?

@BergeronFPV Месяц назад

Many of us understand this controller has no antenna on top. Infact it’s one of the main features, and the replacement as Ian highlighted in the video is nothing more than cheap rubbish. I think DJI is doing this hobby and community harm. No clue why but a large portion of people love DJI products. The second you throw that shit away and build your own quad you will literally view DJI products as scams. And you’re going to feel terrible seeing people all happy to spend $2100 on the avata 2 only to realize that it literally is incapable of flying full acro. It’s like I see heaps of retired older people try and pick up the hobby then get sucked into this DJI trap. Almost like watching someone get scammed but they are loving it.