DJI Goggles 2 FPV Drone support | Vista fix! Dronehacks still works!

Подписаться 8 тыс.

Просмотров 4,3 тыс.

50% 1

UPDATE: DRONEHACKS NOW SUPPORTS THE LATEST FIRMWARE!! • Drone-Hacks 1.35 | DJI...
Goggles 2 now supports the Patato! This is excellent news for those that own the DJI Avata and wanted something that could handle wind better and potentially go up mountains and expand their horizons in the fpv world.
I do understand that there are a lot of guys that really do not like the DJI FPV Racer, but honestly, this drone and the Avata have brought so many new guys into the hobby that will eventually start building their own quads etc. It's also a great way for someone to join the FPV community without needing to go down the rabbit hole of all the technical stuff. Simply put, it has its place.
Get off your butt and go get yourself into the air!
DJI Goggles 2: amzn.to/3QAgHmP
DJI Integra: amzn.to/3QitutS
DJI FPV Racer: amzn.to/3NEs8rw
DJI FPV Backpack: amzn.to/43ZV8iS
DJI FPV Case: amzn.to/3Nj02Az
DJI FPV Flymore kit: amzn.to/3pd9vla
DJI Avata: amzn.to/3N9zfXy
DJI Avata case: amzn.to/3CGcDJr
DJI Avata flymore kit: amzn.to/46eIyy3
DJI FPV Controller 2: amzn.to/3JmbZV4
DJI Integra and Motion Controller 2: amzn.to/3qJDxxa
DJI Motion Controller 2: amzn.to/3pbOAPh
Buy me a coffee:
www.buymeacoffee.com/infinity...
www.buymeacoffee.com/infinity...
Flywoo link: flywoo.net/?sca_ref=2907640.k...
DISCLAIMER: This video and description contain affiliate links, meaning I will receive a small commission if you click on one of the product links. This helps support this channel and allows me to continue to make videos like this. I appreciate your support!
╔════╡My Gear╞═════════════════════╡
║ ► DJI FPV Goggles - amzn.to/3NepEgg
║ ► FPV Goggles - Skyzone Cobra X V2 - amzn.to/3xEkwfA
║ ► FPV DJI HD - Nebula Pro - amzn.to/3N85lRx
║ ► FPV Drone - GEPRC CineLog35 HD - amzn.to/3HExMp1
║ ► FPV Drone - GepRC Smart 35 HD: amzn.to/3zP6JoY
║ ► FPV Drone - DJI FPV Racer - amzn.to/3b2lbQ6
║ ► Radio Controller - Radiomaster TX16S Mark II: amzn.to/3QtPDDf
║ ► Battery Charger - ToolkitRC M4Q: amzn.to/3HAEE6Q
║ ► Lipo Batteries - amzn.to/3xHQwzc
║ ► Camera Drone - Mavic Air 2S - amzn.to/3tN1aDS
║ ► DJI Controller - DJI Smart Controller/ RC Pro - amzn.to/3xJ4GA2
║ ► Drone backpack - PGYTECH OneMo - amzn.to/39CkaOx
║ ► Camera - DJI Osmo Pocket 2 Creator Combo: amzn.to/39yCSXr
║ ► Action Camera - Insta360 Go 2: amzn.to/3HGDy9M
║ ► Editing machine - Lenovo Legion 5 17.3": amzn.to/3xBW8v3
║ ► 3D Printer - amzn.to/3xIHDp6
╚════════════════════════════════╡
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → bit.ly/3wa5iw9
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
DJI Goggles 2 FPV Drone support | Vista fix!
#drone #goggles2 #djifpv #firmwareupdate #fpvracer #beginnerfpv
#dji
Track: Max Brhon - Redemption [NCS Release]
Music provided by NoCopyrightSounds.
Watch: Max Brhon - Redem...
Free Download / Stream: ncs.io/MB_Redemption

Хобби

Опубликовано:

29 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 124

@Warchild-Media 10 месяцев назад

THE 03 AND THE VISTA IS DIFFERENT, THE FPV NOW REQUIRE RID TO PLUG IN YOUR PHONE IF YOU DONT HAVE THE INTEGRA....NO GEO RESTRIICTION BUT RID REQUIED...WISH THE RID WAS IN THE DRONE INSTEAD OF YOUR PHONE.....BUT IT FLIES BEAUTIFULLY

@InfinityDrones 10 месяцев назад

Yeah... Super sad that Rid is hitting you guys in the US... Probably only a matter of time before it goes to other countries...

@AlexSia-qt5tp 20 часов назад

@@InfinityDrones what is Rid?

@efrainramirez3769 3 месяца назад

BRO, you just saved me, not even dji support would help me find i had to download a new firmware, they were saying i had to buy other googles or something

@InfinityDrones 3 месяца назад

Awesome! So glad this helped you. Thanks for commenting and letting others know this still works!

@blueguide 3 месяца назад

Wow! After long time searching here I can SEE finally that I get the nice Avata OSD look also on the DJI FPV! That is what I wanted to know, because I like to have this 50 MBit display also for my DJI FPV. I will give the Googles 2 a try!

@InfinityDrones 3 месяца назад

Glad I could help! But honestly... The v2 Goggels are just fine. Its a lot of money to spend for a very small feature improvement hey.

@racemondo_ 3 месяца назад

This video saved me! I just bought the G2s and found out the hard way that they wouldn't pair. This is amazing

@InfinityDrones 2 месяца назад

Awesome man! Thank you for commenting and letting others know this helped you

@dta6 6 месяцев назад

This was great, awesome content, thank you.

@InfinityDrones 6 месяцев назад

Thank you for commenting! Really happy to hear this helped you!

@Renzostyle5 10 месяцев назад

If you switch back to dji air unit mode do you need to rebind vista or air unit again? This was the case with the goggles v2

@InfinityDrones 10 месяцев назад

With the goggles 2 I've not had to rebind :) but with the V2 you have to yes.

@scotthines5834 6 месяцев назад

Hello great video. Not sure if anyone's monitoring this anymore but I'm wondering if remote ID will be required after upgrading the firmware when flying the fpv potato with the goggles 2??

@InfinityDrones 6 месяцев назад

The DJI FPV has had no update that enforces RID like they did on the Avata, so you can upgrade without fear.

@scotthines5834 6 месяцев назад

@@InfinityDrones Yesterday I called DJI customer support. The guy said (after about a 10 minute hold) that after updating the fpv drone it would not take off without being hooked up to the DJI Fly app on your phone and connected by wire to the goggles. I'm just trying to find out if that is accurate. If so I will probably not upgrade. But I really love the picture quality of the goggles 2 with my 03 air unit and my old vista units.

@InfinityDrones 6 месяцев назад

@@scotthines5834 mmm, I'm in South Africa... So can only tell you what I read on the forums and facebook groups. I would suggest to get an proper answer would be to join one of the facebook dji fpv groups and ask there. Sorry, but on my end my drone just flies :) My Avata I need to connect to my phone app to get authorization when flying in blue zone(geo zones), but my fpv has dronehacks on it and is completely unlocked and can fly anywhere no issues.

@user-oc5ri7pr1y 5 месяцев назад

Why did mine crack, saying the version number was wrong, the glasses and the remote version were not consistent with the plane, and could not be in M gear😢

@InfinityDrones 5 месяцев назад

Sorry what do you mean "why did mine crack"?

@skearon 10 месяцев назад

Thanks for great video My goggles are in FCC mode thanks to ham_cfg_support, I've avoided upgrading firmware so far, any idea if FCC modes remains with this firmware ?

@InfinityDrones 10 месяцев назад

Which drone are you using? Dji fpv? Ham file is still working on the avata.

@skearon 10 месяцев назад

@InfinityDrones I have the Avata, but now that googles are compatible with FPV drone was going to get one too

@InfinityDrones 10 месяцев назад

@@skearon you can get that. The ham file still works in the avata and I'm betting it will will still work work on the fpv... I've just not been able to test myself yet.

@vladimirkh.6569 10 месяцев назад

@@InfinityDrones I have a FPV drone hack with height limit and FCC, glasses V2. Do I understand correctly that it is also necessary on ham_cfg_support glasses for all this to work correctly?

@InfinityDrones 10 месяцев назад

@@vladimirkh.6569 No need if you're running dronehacks, but if you've updated your firmware on your droen you would have lost your dronehacks mod since it does not support the latest firmware at the moment. In that case the ham file would help yes. I have some good news hopefully for you at the end of the month with regards to the dronehacks application support for the latest firmware.

@slg9013 4 месяца назад

does help bypass the 500 m altitude ?

@InfinityDrones 4 месяца назад

Dronehacks does yes, you need to buy the 40 euro license. Check out my Dronehacks 1.35 video.

@darrenowens1543 9 месяцев назад

Hi, goggles 2 still doesn't support mini 3 😢 only the pro version?

@InfinityDrones 9 месяцев назад

Yes sir. Sadly DJI really crippled the non pro version

@DessiLu14 10 месяцев назад

Does the new update require Remote ID on the DJI FPV?

@InfinityDrones 10 месяцев назад

I'm not sure, I"ll test and let you know. As far as I know it is not a requirement for the DJI FPV drone.

@scotthines5834 6 месяцев назад

Did anyone find out about the remote ID component?

@mingscustoms 5 месяцев назад

@@scotthines5834it says in the firmware release that it enables rid

@djhex 9 месяцев назад

Question? I am trying to find the answer but not many vids on the goggles 2 and Vista links. Have a drone, updated the Vista, (Aug26/23) bound the goggles 2, but my mbs jumps around, A LOT. I flew 10ft and started losing it completely. I have True RC lchp patch, and the antenna on the drone is a lollipop lchp antenna sma connected. Why and what is the cause of mbs to jump around from 1mbs to max 21mbs but never staying on it, or going higher even after arming the drone (I took low power mode off just to make a fair test) I also put a different antenna on, and tried goggles 2 regular antenna. Same, keeps jumping. Why? What would cause this? Could use some help as I just had my entire drone collection 5k worth stolen from me, and this drone was sold to me for a reasonable price from a friend. I'm grounded till I figure out why it's doing this, please help?

@InfinityDrones 9 месяцев назад

Does your goggles show low power mode in the the bottom right? When you arm that should go away and it should say unlocked. If it does not do that then you have found your issue. Also check that you're not in a public channel. Manually go to Player and select channel 1 of 2 to check

@djhex 9 месяцев назад

@InfinityDrones I appreciate the super quick response. I turned the low power mode right off just to run it full for testing purposes (no difference) No at no point did it say low power mode on. (Not the issue) I made sure I was in 40 which "should" be the channels 1 through 3 that will give me full 50mbs. I tried multiple channels. That didn't work. The mbs jump around and I find that odd.

@djhex 9 месяцев назад

@InfinityDrones I can't find you on Instagram if you let me know what your socials are I can show you a quick video of the Mbs jumping around. I just don't know what would cause that. It's like it's trying, but just isn't going. I'm going to do a full flash on my FC and Vista tomorrow, I'm hoping True RC antenna will come soon as if that flashes don't work...... I don't know what would cause that.

@InfinityDrones 9 месяцев назад

@@djhex stock antenna are just fine. My Instagram link is in my RU-vid homepage. But let me know about the low power mode and if you're in a public channel

@djhex 9 месяцев назад

@@InfinityDronesNot in public mode, I have 3 channels to choose from I've tried all 3. I'm going to try and bind a set of v2's shortly, if that works we know clearly it's either a antenna compatibility, or the firmware was a bust. If the same thing happens when I bind v2's to the Vista via updated firmware, I'll try and find a roll back on github for firmware rollback, if that makes the v2's work, then we know it's a firmware issue.

@cyberfly8452 4 месяца назад

Thanks for the video ! Did you hack the drone after that ?

@InfinityDrones 4 месяца назад

Yes I did :)

@cyberfly8452 4 месяца назад

@@InfinityDrones How does it works since 1.04 ? Have made a video ? thx

@InfinityDrones 4 месяца назад

@@cyberfly8452 What do you mean? you do the mod as per the video, then after you update to the mixed firmware version 01.04.0000c

@cyberfly8452 4 месяца назад

@@InfinityDrones Ok so I have to buy a licence, correct ?

@InfinityDrones 4 месяца назад

@@cyberfly8452 To hack/mod your drone you have to buy a license yes. But if you just want to change parameters or flash firmware there is no need to pay.

@wastedworldexploration2842 10 месяцев назад

I was so excited when I saw this pop up but losing drone hacks is a deal breaker for me,with me having the dji FPV,and vistas,it would have been great to upgrade to the goggles 2 from v2,I hope and prey that the legends at drone hacks can look into this

@InfinityDrones 10 месяцев назад

Yeah, but I heard a little birdy that they are activly working on supporting the latest firmware. Fingers crossed that there will be some good news soon.

@wastedworldexploration2842 10 месяцев назад

@@InfinityDrones if that happens you may even get a whole 1% back on you rating😉😂

@InfinityDrones 10 месяцев назад

@wastedworldexploration2842 😂

@wastedworldexploration2842 10 месяцев назад

@@InfinityDrones quick question for you with your big brain!,I seam to have confused myself with compatibility with v2 goggles I have a dji FPV,and various quads/fixed wings with vistas,and I’m thinking about getting a quad with a 03,can I switch between those 3 different systems while keeping drone hacks?

@InfinityDrones 10 месяцев назад

@@wastedworldexploration2842 Yes you can, as long as you do not update your dji drone's firmware you will be good to go. There might be an issue where if you update the goggles to the latest version that I would then prompt the dji fpv to want to update as well. The good news is that it should like the guys from dronehacks might be supporting the latest firmware soon! This will solve all the confusion!

@heisenbergheisenberg1484 10 месяцев назад

Im so confused haha i did my hack for DJI FPV and everything was working perfect. It seems that DJI released a new firmware yesterday and I could not take off until you update. I of course didnt I wanted to wait until I asked here what to do. I just took my drone outside again to boot it up an grab the firmware version they want you to update to and the warning was just gone and I could launch! So confused haha.

@vladimirkh.6569 10 месяцев назад

Always turn on airplane mode on your phone before using the app. Only in this mode, connect the drone/goggles to the app without fear of losing hacks.

@utahflying2478 10 месяцев назад

I don’t need to use my phone when you have drone hacks, never used my phone when I got the warning.

@InfinityDrones 10 месяцев назад

Hopefully dronehacks will support the latest dji fpv firmware. Will have news soon.

@Todd_Gerhardt 5 месяцев назад

Whisch firmware supports 50mbs? Im on 01.03 now

@InfinityDrones 5 месяцев назад

50mb has always been supported... Have you gone in the goggles and changed the transmission to high quality mode?

@Todd_Gerhardt 5 месяцев назад

@@InfinityDrones I'll have to give it a go but I've adjusted settings like crazy and couldn't find the option to go from 25 to 50 however I do only have 2 to 3 channels depending on what hz I set it at

@InfinityDrones 5 месяцев назад

@@Todd_Gerhardt did you upgrade the goggles v2 to the max? If so you need to set the mhz to 40 and you be in max quality mode

@Todd_Gerhardt 5 месяцев назад

@@InfinityDrones looks like I'm on 01.06 on the goggles, I got it second hand and everything worked good just can't figure out how to get that 50mbs to pop up on the screen lol

@InfinityDrones 5 месяцев назад

@@Todd_Gerhardt did you set it to 40mhz?

@InfinityDrones 10 месяцев назад

DRONEHACKS OFFICIALLY support downgrading and Goggles 2 support! No more worries about NFZ and Altitude limits!!!

@namename-dx2zj 10 месяцев назад

Tried the new version 1.35 to downgrade my 01.04.0000 firmware on DJI FPV but failed due to anti-rollback. For Goggles 2 support do I need to get a license?

@InfinityDrones 10 месяцев назад

@@namename-dx2zj did you not buy a dronehacks license?

@namename-dx2zj 10 месяцев назад

@@InfinityDrones No haven't bought a license. Normally its free just to downgrade the firmware.

@InfinityDrones 10 месяцев назад

@@namename-dx2zj It's free to downgrade on the same anti rollback version, but sadly DJI increased that rollback limit to prevent people from downgrading.