B7000 perfect for securing Lenses or any kind of small cable on Fc or any other wiggle stop. B7000 stay a bit flexible when dry. Can also be used as coating on some parts. Great Video 👍👌
When you disassemble the camera, did you see an IR cut filter? I can't tell from the video. I'm wondering if this camera can be modified for infrared (for flying at night with IR iluminators).
What threading is used once you unscrew it? Could we "mod" it and use a m8 or m12 lens? Obviously that'd change the built in stabilization and whatnot but you could make a new gyroflow calibration. The stock lens is 2.34mm f2.8. I'd love to fit a 2.1 f1.8 in there for some better indoor/lowlight. I've put the lens from the anlaog caddx rattel camera in a few action cameras for this same purpose and it works really well. Sharper, wider, brighter lens.
i bought many O3 filters, just to protect the lens, they will take the initial impact, i have some of those cracked or scratched already, o3 lens still fine!
Since you removed the lens, do you see an ir cut Filter at the back of the lens or on top of the sensor? If, i wonder if i can buy one remove the ir cut filter an make the cam full spectrum. Maybe add an ir Filter to create this nice ir Look. Thank you for your Support.
Thank you so much. I believe that because of your work company’s like fllywoo gonna start selling joust the lens. Personally I’m always going for your choice when swapping damage camera lens
After a small falling from 1m to floor there is no image transmission signal on Avata 2 to goggles 3, telemetry is transmitted without problem. RC/HD signals are good. Reset/firmware update didn't help. Checked camera cable to gimbal and board they are OK. Drone only flies up from floor to 1.5m height and hovers. No moving anywhere from RC Motion 3 controller. Before falling I could see inner storage on drone in goggles 3, after falling - no. Is there any thoughts?
Be great if just the lens was avail too for $5-10 . But hey this is great option . Be worth throwing one on the basher quad at least ( and keep the oem for a good quad )
You may have to wait several months until the end of the summer, cause they like to sell a lot of Avata 2 first, before they will give us the O4 without an quad mounted to it 🫣
@@baggszilla don't write that, people will believe that. Mads words in the last stream, maybe there will be a O4, maybe there won't never be one. DJI will try to get the most people possible to buy the A2. So we will wait several months, if there will be a O4. Last time it was something like 5-6 months from A1 to O3. Good thing is, the O3 works flawless (for me) and the quality is top.
@@philihc I know I'm just joking. I listened to Ian Sunday stream and I heard him saying how people are saying he said that lol I'm perfectly fine with the O3 myself.
@@MadRC hahaha. OMG. I knew it lan.... Hehehe. Court this wed at 10 am...... Please pray for a positive outcome mate...I can use some good news..🙏🙏🙏. Btw. Thank you for all your hard work.. Your the go to guy for most us..I always send anyone new to your channel... So thank you again for your work .🤙🤙🤙✌️✌️✌️💙 Mikey
I wish you would have shown how to attach the mipi cable to the camera module. i can only rely on the visual aid from your video as to how the cable is positioned and do not know exactly how to attach it properly. I am going to be attempting this fix shortly and that has always gave me an issue. Great video and content as always.
Its rubbish we cant get just the lens. its literaly a $6 part that we buy a bunch of electronics with including the freaking sensor just to throw the expensive bits away.
I bet you anything the other cameras that are unable to calibrate are probably for that. Off brand Dji started is probably making them you no the one that has the raptor They probably made a run. So if future problems arise, people can still buy them