Dodge Ram Transfer Case Removal!! 5 MIN DETAILED HOW TO!

Подписаться 7 тыс.

Просмотров 120 тыс.

50% 1

Tools I use:
Milwaukee 3/8" M12 Impact (bare tool) - amzn.to/3Etyxyt
Milwaukee 3/8" m12 Impact (kit) - amzn.to/2ZuUDBe
Milwaukee 3/8" Ratchet - amzn.to/3Bp4ru3
Milwaukee 1/2" Impact - amzn.to/3GtNUIU
Milwaukee Flashlight - amzn.to/3EtzeI5
Milwaukee Fuel Combo Kit - amzn.to/3w0ZVRq
I am in no way sponsored by Milwaukee, I am just a huge fan of their tools. It really helps this channel by purchasing through the product links I provide, thank you.
Driveshaft removal video - • Dodge Ram 4x4 Front an...
Today I show you in detail how to remove your transfer case in your Dodge Ram! This process should be basically the same for most years and whether you have a half ton, 3/4 ton etc.
The pickup I'm working on is my 1998.5 24 valve Cummins Turbo Diesel.
Be sure to subscribe!
Disclaimer:
I AM NOT A PROFESSIONAL
Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Jake.

Авто/Мото

Опубликовано:

1 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@cookinitmax 3 года назад

Because some people know everything removing a trans case or transmission or engine to them it isnt hard to do for them. I thank you!!! for taking the time to even care about those who don't partake in the world of the mechanic.

@matthewrafferty6896 2 года назад

Thanks for the video. My favorite part is that it’s a 5 minute vid…right to the point and no bullsheet

@geriatricginger 3 года назад

3 people apparently couldn't figure out driveshafts, one bushing, 5 vacuum lines, and 6 nuts. LOL Great video!

@crazydougthewolf Год назад

Thank you for the detail! I'm about to pull mine out and needed to make sure I don't miss anything and yank it off. Thanks again!

@davida.simpson7011 Год назад

Excellent video. Straight to the point without 30 minutes of nonsense talking about your dog or your other projects. Much appreciated for not wasting our time. Excellent!

@ryanedwards11 2 месяца назад

This video was great. Clear and efficient. Thank you.

@Casey-ry7vc 2 года назад

Subscribed purely for what you said about the flashlight. My favorite milwaukee tool as well

@j-bobsgarage7535 2 года назад

Thanks man. Yeah it's for sure my most used tool, gotta have good light

@fittedproductions 9 месяцев назад

Bro you have some awesome informational videos, man I really appreciate it

@adamrhodes1407 2 года назад

I was mostly impressed with the Milwuakee collection - lol! This was very helpful though, I'm about to attempt my first t-case tear down on a 98 ram 1500.

@2ndamendment770 2 года назад

Good Job ! You made it look easy > Bye The way > Cool Tools also !!

@jaykay8570 3 года назад

I had a hell of a time getting those front drive shaft bolts off at the TC.

@barrettsmith881 Год назад

Nice Arsenal of Tools! Milwaukee is The Best 👍👍🙂

@buddygallagher1193 2 года назад

Thanks man I learned something appreciate it

@D-Mny 2 года назад

I realize this is a 2 year old video, but thanks. I have a vibration in my rear driveshaft and this will help with me getting it removed

@johnrobinson2913 11 месяцев назад

Thank you for your viedo it helped me understand how to change my transfer case. I just have 1 question how do you check a used transfer case to see if it is worth buying or if it works. It is on a 99 dodge ram 1500 sport

@raycash9368 Год назад

Thanks getting ready to pull one off at pick n pull

@user-sv1zn9ef6l 2 года назад

I’m here cuz my transfercase grenaded hby?😂

@LVPIERCED 2 года назад

#GrenadeGang 24v 3500 💪🏾

@moltenironmetalworks9209 Год назад

@LVPIERCED 01 single cab3500, mines fucked but it's a 369,000kms

@dylanralls3624 Год назад

I’m almost there

@user-sv1zn9ef6l Год назад

@@dylanralls3624 💳

@Matt-si7uo Год назад

2011 1500 v8 gettin trailer out of snow

@mikeyohnk758 2 года назад

I have a 3/4 ton 4x4. I need to replace the overdrive housing and I can't get the transfer case separated from the overdrive housing. I took the 2 components off the vehicle as an assembly. Any suggestions on how to separate the two components? Great video by the way!

@Ovela108 3 года назад

Could i take a transfer case off and put a 2wd unit into a 4x4 46re?

@gunsandhorsepower Год назад

What transfer case came in the 2nd gen and can you adapt them to a th400

@beattheiphz7319 2 года назад

I had one bolt blocked by the transmission mount bracket, had to remove brace.

@shauncline5055 2 года назад

Will exhaust be in the way

@Baitcasterbass 4 года назад

This is great thanks for the video I got a 95 ram 1500 but pretty much looks the same underneath I need to figure out what the hell is grinding under my truck could be Trans only grinds under load though when pressing gas

@rob_v_nj 3 года назад

did you ever figure this out? I am getting a grind in my ford under load or downshifting. Im thinking has to be transfer case.

@Baitcasterbass 3 года назад

@@rob_v_nj I wish I figured it out lol I haven’t looked Into it I think mine is also my transfer though

@ArrowItArchery 3 года назад

Could simply be your u-joints. Usually grind under load, and sometimes a vibration along with the grind.

@coltk2457 Год назад

Overdrive unit on transmission has a wavy snap ring that’s common to break and make all kinds of noise. Costs about 12$ at a trans parts store and takes a day to do the whole job if it’s your first time. If you aren’t strong I recommend getting a trans Jack to put it back in, I had no issue removing it without one but putting it back up was a pain. If I had to do it again I’d get a trans jack just for installation. Then again, I have a 3/4 ton with the hd transfer case so I’m know it’s a bit heavier. Btw no need to remove transmission for this job, just remove transfer case then you can’t unbolt overdrive unit.

@shauncline5055 2 года назад

Can the 4 block go back on the wrong way

@BuildSomethingAuto 3 года назад

Wait, you missed the part where you have to remove all the mud and cow shit covering the bolts in order to get them off 🤣 I need to find better parts trucks...

@nathanpotter0211 Год назад

Screw the parts trucks, I have to do it on my daily 🤦‍♂️

@mikejames5335 3 года назад

You made that sh!+ look super simple and easy.....but a great video....i know the one on my 04 1500 isnt going to come out that easily!

@coreypincura8459 2 года назад

How did it go I have to replace mine currently same year

@davidmartin8656 2 года назад

What does the red vaccuum line do I. The video at 3:51 mins .. it's the red line bottom left side that is on the trans cross member

@j-bobsgarage7535 2 года назад

It goes to the CAD (central axle disconnect) on the front axle if I remember right. I believe red is disengage and black is engage. Not 100% sure if I'm correct on this it's been awhile, someone correct me if I'm wrong or give it a quick Google I'm sure you'll find your answer.

@the_ironkat5698 2 года назад

Hey so I’m swapping the tranny in my 99’ ram 1500 and got the driveshafts off and working on the transfer case currently but I stopped because i noticed some connections missing, could some of these connections cause the transmission not to shift?

@j-bobsgarage7535 2 года назад

No, trans and t case don't communicate

@bluewffl8472 2 года назад

Unless he meant cause it not to shift into 4x4....vacuum lines control the transfer case engagement I'd assume...

@vibinzx6r416 3 года назад

This will also work for a 1996 dodge ram 1500 correct?

@j-bobsgarage7535 3 года назад

yup

@aaroncastillo843 4 года назад

👍

@straydoggarage7435 3 года назад

That was pretty yummy when you squeeze down on your wrench and your pinky started bleeding 😂😂

@bbsandtts 3 года назад

did you drain the transmission or keep the fluid in?

@j-bobsgarage7535 3 года назад

drained it

@ironwoodreviews8604 Год назад

Even though you drained it, did fluid still drip out when you split the 2? Is it 100% necessary to drain the transmission or did you drain it just because?

@austinyocham8136 3 года назад

Do you have to bleed or is that just an extra step

@j-bobsgarage7535 3 года назад

you should to get all the air out, doesnt take long to do

@austinyocham8136 3 года назад

Ok and did you have to fill the tcase or trans after the split and have you done a input shaft

@j-bobsgarage7535 3 года назад

@@austinyocham8136 trans yes, t case no. no i havent done the input in it.

@MechInvent 3 года назад

My grandpa taught me that if you don't bleed at some point, you didn't do a good job lol.

@MechInvent 3 года назад

Ok I got the job done, your video was much appreciated when removing the linkage. I was swearing at it until I grabbed my channel locks... Then I swore less. No blood, but I did drop the entire thing on my ring finger. Now I'm single for tonight.

@dashawncormier5710 2 года назад

2008 dodge ram 1500 also?

@j-bobsgarage7535 2 года назад

It'd be very similar

@michaelmartinez9602 3 месяца назад

Haha bloody knuckles

@Ivansthename 11 месяцев назад

Remove the exhaust?

@davidmcdaniel5150 11 месяцев назад

@randypiedmonte7381 2 месяца назад

Surprising that there is no rear support on that transfer case

@wills4689 2 года назад

Is this some kind of a joke? The Dodge Ram that I removed transfer case from has a cross member with a block on top..attached to the bottom of transfer case. That was the worst part of the whole job. He somehow left that part out. Yes..8 bolts and some vacuum lines would have been easy..but you'll need to watch another video to actually remove your transfer case. Maybe the 98 is a lot different. As far as I know..the 94-01 is the same.

@j-bobsgarage7535 2 года назад

You don't need to remove the crossmember to remove the t case, the block you are talking about is attached to the back of the trans. Unless you have an aftermarket crossmember supporting the t case but not really a common thing to do. So no, it's not a joke, you just gotta know what you are doing so you don't create more work for yourself.

@dc440-4 Год назад

Mine is a 98 3500 and it's like you say Will s.

@logantilton8635 Год назад

@J-Bob's Garage I have same issue it like my case is shifted to the side a bit and I don't have room to get one of the bottom bolts off

@newbbeginnings5630 8 месяцев назад

i'm in that spot myself cant get the bottom bolt that plate is blocking and i have no room for wrench to enter the way he does

@LVPIERCED 2 года назад

After watching this video 2 or 3 times before starting. I’ll say… Just as easy as it looks. Only thing I’d have add is this. When going for the bottom bolts of the Tcase unbolt the rubber bushing between the trans Mount and bracket. Jack up the back of the Tcase to create enough space and fit a wrench to drop the bracket. That should give you enough room to fit your wrench. Ratchet wrenches will be your best friend for majority of this job. If you’re situation is similar to mine where you cant go in to 4H/L at all to keep the front shaft from spinning you can unbolt it at the front dif and slide the whole thing out to the rear. Did this whole thing including removing both drive shafts in 2.5 hours with it parked on the street on a hot summer day in Vegas. Never touched a trans or Tcase before in my life…. Let alone a diesel. With a clear Sunday and a replacement on hand ready to go you could probably RNR this in 4.

@davidmcdaniel5150 11 месяцев назад

That top center bolt was a beeeatch.