No video :(

Rough Idle??? Try This: Jeep Throttle Body Cleaning

Подписаться 81 тыс.

Просмотров 62 тыс.

50% 1

Proudly sponsored by Enginetech enginetech.com/
Engine rebuild kit I used on my 4.0L rebuild: amzn.to/2WuNdbu
Throttle Body Cleaner: amzn.to/3nDpjru
Throttle Body Gasket: amzn.to/3aoZ9EX
Throttle Position Sensor: amzn.to/3r9hFHo
Idle Air Control Valve: amzn.to/2K7LHe3
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
👨‍🔧 A few of my favorite tools 👇
Pro-Lift 3ton Jack Stand: amzn.to/2RU6rGa
Pro-Lift 6ton Jack Stand: amzn.to/33R9epj
3 Ton Jack: amzn.to/2S5obyJ
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver. amzn.to/2fTDoTR
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional business inquires: email me at dale@jeepsolid.com
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Опубликовано:

17 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@camcordernonsense5264 3 года назад

The shiniest part under the hood. Thanks for the knowledge.

@306-fromthestix 3 года назад

I cleaned the throttle body on my 2000 wj 2 days ago and I immediately went from 13.6 liters per 100kms down to 11.9 liters per 100kms

@rickthompson1422 2 года назад

...did yours have a lot of gunk build up?

@NoWr2Run 3 года назад

I found putting a little Grease like SuperLube, Brake Caliper Grease or anything that won't EAT O-RINGS on the O-ring to the I.A.C. helps it SMOOTHLY go back in. Also make sure you get the I.A.C. pintle housing very clean inside, especially where it meets the chamfer. Ya taking the I.A.C. housing off is a risk if you don't have that gasket, TOTALLY AGREE. GOOD JOB AT LEAST YOU TOOK THE T.B. OFF TO CLEAN, MOST DON'T.

@isaacstephens674 3 года назад

That is a much better place to keep a shovel than where I've been keeping mine just sitting on the back seat

@rogerheath4348 3 года назад

Loved the video used it a couple times today. Thanks for putting these videos out for us.

@vrmvrum 3 года назад

California smog issues on YJ's? ( '94 -4.0 original owner) Mechanic's & Smog shop can't figure it out. Hint's, tips, advice? Your content is awesome!

@sbwal2502 3 года назад

Well done again Dale! I plan on doing this exact thing this weekend. Keep up the great work!

@riverratfilms703 3 года назад

So I’ve been having a problem with my jeep. I’ll be driving then the rpms will drop then catch back up and the jeep backfires. I’m thinking either crank position sensor or cam position sensor. Do you think that’s right? Thanks! Your videos have done me more help than just about anything. Keep it up!

@rickthompson1422 2 года назад

...in the end, what was your problem? Thanks....

@wadebasham3989 3 года назад

Got a question dale ,could you make a video how to change a steering gearbox I wanna know how to do it right

@VeganGorilla555 3 года назад

Now that you have a shiny part on the engine you have to keep going! lol

@zerobf Год назад

Don't you have to readjust the TPS value voltage since you took it out?

@dcwebb1 Год назад

Great video, very good job!

@waynearmstrong5525 3 месяца назад

What is a possible problem when I'm pushing oil . I want to keep my yj Vin matching

@samvossen6234 3 года назад

love the vids

@shychi7772 3 года назад

Love your vids but i need help. Ive LOOKED everywhere and nothing.i have a 2.5 yj and I'm getting a code 23 ive already relocated it and cleared it and still having it pop up. Ive bought 3 replacements and nothing. Next step ill rebuild the PCM please help

@eMotoAZ Год назад

Sometimes it's as simple as the PCV valve. A $7 part clogging your motor.

@Mark622111 4 месяца назад

Have a dumb question. I have a new throttle body for 98 TJ 4.0L but the throttle cable knurl is smaller than whats on the Jeep now, which is a larger size. How do you remove the knurl from the throttle body arm??? Don't want to use a press until I known the proper procedure??

@danieljohnson8437 6 месяцев назад

Good value

@theewelder 2 года назад

so wait......u just cleaned the 2 sensors.....0 need to replace?.....correct?..OR NO.....ty......awesomne video......looks BRAND NEW...WOW...I subbed!

@jamessnook15 7 месяцев назад

Do you have any advice as to what could cause a sputter/hesitation when I pull out in first gear at low RPM’s? I have a 94 YJ, 2.5L

@clintclendaniel3752 2 года назад

I have a 1998 dodge Dakota base model 4 cylinder 5 speed trans replace all sensors on intake and throttle body new fuel regulator my truck has a rough idle auto zone says my ignition switch is bad but I can still drive it started and unlock my steering wheel idk what to do it’s a jeep motor and trans ?????😞

@miguelbornios6051 Год назад

Hi Dale, @JeepSolid I have a question. Why the idle on my 94 YJ stays on 1300 RPM if I already did a complete tune-up, replaced the MAP, IAC, TPS, PCV and grommet. Thank you!!!

@sschwartz2509 3 года назад

Any tips on replacing the hose for the PCV valve? It was missing when I bought mine.

@larrymaciassr6007 2 года назад

Is there such a thing as a Nutter Bypass on a 1989 - YJ - 4.2 with an HEI ignition?

@mrmanautomotive 2 года назад

Great video! I recently did a full throttle body removal, cleaning, and installation on my channel if you want to see it. This really is a great way to level out the idle and help the engine run smooth.

@solarflare4259 5 месяцев назад

Replaced all sensors, the computer caps still uncontrolled(hi/low) idling after engine start for 2-3min. 1992 yj 4.0…

@mindstorm-communications 2 месяца назад

did you have a fix for this? my YJ is now idling high and won't calm down.

@normanbranders Год назад

Hi great videos,I have a 2007 jeep Cherokee,red lighting bolt flickers,then go away . So frustrating,no fault is being picked up from the diagnostic test any ideas guyz.

@donlum9128 Год назад

Press wiring into connection socket tight. Ran into this with my jeep jk

@bradlfsh 2 года назад

How come it doesnt have the MAP sensor on it?

@charleschapman5536 9 месяцев назад

3 am and I’m wondering…what’s up with my ‘04 Gr Cherokee. Intermittently, when I put trans in neutral or park, she revs to 1500.I can feel her trying to pull me through stop signs. Any thoughts?

@JeepSolid 9 месяцев назад

could be quite a few things. MAP, Vacuum leak, PCM, TPS. Just have to start testing things

@KreateYourPeace 4 месяца назад

2021 Jeep Cherokee wouldn’t start..wouldn’t even try to turn over. Hooked up my reader and got code P2111…cleaned my throttle body and still same issue. Any suggestions?? Maybe the sensor in throttle body? Would this stop my jeep from starting or even trying to turn over? Almost seems like dead battery but not sure. Please help!

@punkr6 23 дня назад

Throttle body wouldn’t stop it from turning over, you have another issue

@ky0611 2 года назад

If you have a throttle body spacer will the gasket still be in the same place?

@nate4036 2 года назад

Yes

@derrickblanyar5939 3 года назад

What rims do you have on your jeep

@stevecoffman5555 Год назад

Does the 4.0 space help any, or wort the money on the 2.5

@kavik526town2 Год назад

4.0> anything else.

@wardperozuk2782 3 года назад

Boy, I seem to have a number of videos to watch! Somehow I got way behind on watching!!

@ThePeopleVerse Год назад

U was finna comment yhen i wasnt. The only comment i decided on is, It diesnt look like tgis guy answer questions At All. So, Ha, no comment. C'Ya

@upthecreekyt 3 года назад

My '95 yj 4 cylinder has issues starting after it rains. What could possibly be getting wet that would cause that? It turns over but won't fire up. Sputters like crazy if it does start. Distributor? Perhaps you could direct me to a video of a fix?

@NoWr2Run 3 года назад

I would say you're getting condensation inside you're Dist. Cap. Whens the last time you did an ignition tune up ? Like Dist. Cap, wires, plugs, rotor & possibly the coil ?

@upthecreekyt 3 года назад

@@NoWr2Run It's been a while. So you think the distributor is probably the main source of the issue?

@NoWr2Run 3 года назад

@@upthecreekyt YA, You're getting condensation somewhere in the ignition system. Try these 2 things, Fire it up with the hood open in a VERY VERY DARK PLACE & LOOK FOR TINY SPARKS ESCAPING ALONG THE SPARK PLUG WIRES, AROUND THE DIST. & COIL. Also you can get a spray bottle while it's running ( ANY TIME ) & spray the wires & stuff down with some water too see if it start's to miss or not. GOOD LUCK SIR.

@jmac5023 3 года назад

Mine is a 4.0 but i had a similar issue i got a new coil and never had the problem since. Not saying thats what u need but they are cheap enough to maybe give it a try!

@NoWr2Run 3 года назад

@@jmac5023 That's why I said about spraying the ignition system down with a spray bottle of water. Or looking at the engine in the dark for spark jumping. He's having problems when it's wet outside, personally I would do a total ignition system tune up if not done in years or many miles.