Door Lock Actuator Replacement | VW Golf MK5

Подписаться 8 тыс.

Просмотров 116 тыс.

50% 1

This video was preformed on a 2008 Volkswagen Golf 1.6L.
Repair Manual: shrsl.com/4fjft
20% OFF Sitewide Code: ZAKI20
T20 Screwdriver: amzn.to/3qyIYNg
Triple Square Socket Set: amzn.to/3FhuLsu
All Purpose Gloves: amzn.to/39Ywgyo
Trim Tool: amzn.to/3Dq9QCE
Bosch Compact Drill: amzn.to/3s0bsgE
Screwdriver Set : amzn.to/3Ce5YDt
Socket Extension: amzn.to/3kwmybW
Torx Bit Socket Set: amzn.to/2YJbIaN
Pick Set: amzn.to/3Cik6LT
I am not a certified or professional mechanic. This video is for entertainment purposes only. Zaki Garage assumes no liability for any actions performed by the viewer as a result of the information contained in this video.

Авто/Мото

Опубликовано:

16 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@troypham8883 Год назад

Thank you soooo much. You just saved me over $500 because i am going to try to replace the actuator myself instead of bringing it to the shop. Thank you and thank you RU-vid......from San Jose, CA

@ZakiGarage Год назад

Glad to help

@alexchi2423 2 года назад

Short, simple and straight to the point instructions without all the narrative pizzazz.

@jackmag4056 2 года назад

This tutorial is the best of the lot , Not sure why it hasn’t got more views

@Carwash1989 Год назад

thanks for this video. because of this i was able to reassamble the door mechanism after upping faulty driver window

@dogigniter 2 месяца назад

Thank you! Replaced the door skin, the strut and the door actuator with just this vid!

@ZakiGarage 2 месяца назад

Thanks, glade to help

@blessedhope1591 2 года назад

Thank you. Followed your video and problem fixed. Saved me some dollars that’s for sure. Cheers. 👍

@sorin.n 3 года назад

Thank you so much for the detailed presebtation!

@johnfinlay4143 Год назад

Excellent . Best by far and I have done some searching for door skin and door lock removal complete with tool bits required

@radekb83 2 года назад

Thanks for the video. A tip for anyone doing this solo: apply some painters or masking tape to the edge of the quarter panel before taking the door skin off. This will protect it from accidental damage, (which unfortunately happened to me - edge scrape putting the door skin back on).

@jesusds9154 Год назад

Great video! I will add an important thing for me and maybe for others viewers: you need to put that metal spring in the gap you see in the piece where you put the cable from the old lock (4:04 to 4:11) to get the right adjustment for the door handle, otherwise it will be loose.

@ZakiGarage Год назад

Good catch, might readjust it in the future.

@princesssolace4337 Год назад

Is the Golf 7 the same?

@AustinSkyeWellness Год назад

Thank you, this helped with my '06 Jetta. I hadn't realized the faulty door actuator was why I wasn't getting a chime when I left my lights on until the new one was installed. Bonus!

@ZakiGarage Год назад

Very werid fault connection but glad it all worked out for you ✌🏻

@zackp475 Год назад

Thank you. This helped me very easily replace the lock actuators on both my front and rear passenger doors on my MK5 and saved me a lot of money.

@colinmiles1052 2 года назад

Took me a long time to find this but VERY useful - thanks!

@ZakiGarage 2 года назад

Glad it helped!

@MarkFB5vr Год назад

Shot boss got the job done and watched Humbled mechanic also but thank you job done

@nww6982 3 дня назад

Remember do bottom nuts up first so it aligns with top. Wind out screw holding handle in , wind out to much and the whole dinner piece will fall out and you'll need to work out how it goes back together. Only knew I had a problem when locking the lights didn't flash , would only flash when unlocking so I could have had a faulty unlocked door mor months.

@intestinalworm1202 2 года назад

Great video here!

@LUXFEE_OFFICIAL Год назад

nice video! thanks mk5 frienD!

@elizabethwinsor-strumpetqueen Год назад

Very good thanks for your help 😁

@duchuynh8744 10 месяцев назад

Thank you

@bokyaw7378 Год назад

thank you brother.

@huseyin1312 2 года назад

Very good useful

@DweEroz 2 года назад

❤️❤️❤️❤️❤️❤️ You saved me hundreds of euros, thank you!!

@ZakiGarage 2 года назад

Glad to help 👍

@eduard466 Год назад

thanks for this great video, very helpfull

@ZakiGarage Год назад

Thx glad to help

@montakims Год назад

THANK YOU I LOVE YOU

@seanwallace1972 Месяц назад

Do the doors strip down like this on the mk6 2009 golf too?

@jhonathanjones3427 2 года назад

Thank so much

@ZakiGarage 2 года назад

You are welcome

@leandrolefa 2 года назад

Thank you.

@ZakiGarage 2 года назад

Welcome!

@teiskolainenmaajussi74 Год назад

What if I can't open the door? It's locked and the handles don't work neither the window

@djalecarras4016 Год назад

Hi and thank you so much for your video! a have a question.. to change the rear door look would be a similar process? thank you again dude!

@ZakiGarage Год назад

Thanks man 🙏, I haven't done the rears before, but I assume they would be very similar, I do need to do them on my car too but haven't gotten to them yet.

@intestinalworm1202 2 года назад

Hi, I have a 2009 Passat CC (frameless window) - have removed the front driver's door card trim and then the inner panel inside that and have now gained limited access to the door lock actuator and its white plastic carrier frame. Looks like you need to remove the window/window carrier however to get the actuator fully out so it can be replaced. Might be better if I remove the outer steel door skin to more easily remove the door lock actuator. What do you think? Any suggestions?

@ZakiGarage 2 года назад

I'm not familiar with the passat but I would start with investing in a repair manual for that model and see the repair procedures for the lock.

@louisik1 Год назад

Any idea if this process can be used with a MK4 (GTI)? All the other videos get to the actuator by removing everything on the inside of the door. This is would be a lot easier.

@ZakiGarage Год назад

Sorry, not familiar with the MK4's. MK5 and older models are extent where I live so I never see them.

@mordaly9143 2 месяца назад

Hi. Could I have the bolt number for the electric lock please? 5:08 thank you 😁

@mariusverpecinskis2327 2 года назад

Nice video, helped a lot, but have issue with door handle it's kinda loose compare with other ones any idea what I done wrong?

@ZakiGarage 2 года назад

Thx, I believe the cable at 6:55 is the way to adjust the handle, try removing and reinstalling it again but with more tension on the cable if that explanation makes any sense. My door handle is also a bit looser too after the fix but not loose enough for me to bother with opening the handle again.

@mariusverpecinskis2327 2 года назад

@@ZakiGarage thx will have a lok

@ClaudiuB 2 года назад

Nice video, very similar to mine 😄 but I still have the problem of not unlocking from the fob😿 idk why. Maybe some broken wires in the wire loom? I’ll check that out

@ZakiGarage 2 года назад

Thx, I've heard about reprograming the locks with VagCom tool, you can look into that.

@sbodaly Год назад

I had the same problem. I disassembled the fob, cleaned out the dust and put it back together. It fixed it for me, and the LED even works again. Did you find a fix for yours?

@ClaudiuB Год назад

@@sbodaly Nope, now is working fine but who knows when it's gonna stop working again lol

@JOKER-ye7hs 6 месяцев назад

hello please the size of clips in 0:20 thanks i need this clips

@montakims Год назад

I just have the hardest time getting the driver door lock cylinder out of the door. I don't feel any screws threading except maybe one that doesn't turn but feels like a spring that just keeps spinning, just like the door lock cylinder because it's broken. I can't get the outer door panel off with the lock cylinder still holding it in place, what to do?

@ZakiGarage Год назад

The screw on the lock cylinder doesn't take a lot of turns, and you're not supposed to remove that screw. Try putting the screw all the way back in, and slowly see if the lock cylinder starts moving with every turn of that screw, and the door handle has to pulled or open when removing the lock cylinder.

@tenzin044 11 месяцев назад

Hi. I need to replace right side front (driver site in UK) Is it any different between rear side doors and front side doors in process? Tom

@ZakiGarage 11 месяцев назад

This vid is on the front left bit driver side but the same as your front right driver side. The back doors I haven't taken them off yet but I assume the process is similar to the front.

@tenzin044 11 месяцев назад

@@ZakiGarage Ok I quess the same. Thanks!

@MohammedAli-vh4wi 2 года назад

Hi I’ve got an issue with my mk5 golf where the door is dead in the locked position. Windows don’t go up or down. Door cannot be open from inside or out. What can I do?

@ZakiGarage 2 года назад

I'm not familiar with how to fix this issue, but since both lock and window don't work I would check if its an electrical problem first where the door isnt getting electricity. would check with a scan tool if there is communication with the door modules and if the harness to the door isn't damaged if you can access it.

@TheSweetVillain Год назад

6:58 is that a tiny microchip in the door handle ? Just like the one in the key remote ?

@ZakiGarage Год назад

Thats attaching the cable end between the handle and the lock mechanism. If not attached the handle would not open the door.

@TheSweetVillain Год назад

@@ZakiGarage Thanks a lot for answering.

@MrK3vish 11 месяцев назад

You can do it without disassembling the door panel you need an angle key that's all

@LouisPiscopo Год назад

Peugeout 207cc

@nileycat Год назад

Anyone got a part number?

@ZakiGarage Год назад

Sorry I didn't put the part number since there are at least 2 different locks with different pin numbers on the connector for this car depending on which model you have. I ordered the wrong part in the beginning, so i do recommend to make sure which part number is the correct one for your car before ordering.

@TommyT_ Год назад

Think I'll let someone else do this one..

@user-nl4ei4qm5r Год назад

Any link to buy the compatible lock? Thank you.

@ZakiGarage Год назад

I didn't put a link since there are different locks for this car. And I did order the wrong one at first. And the quality on some of the locks I tried were not good.