No video :(

DPC Cream | Damp Proof Course | Rising Damp Treatments

Подписаться 334

Просмотров 115 тыс.

50% 1

Once injected into the mortar bed, DPC Cream slowly releases silane/siloxane into the capillaries of the mortar bed until the cream is completely absorbed. The cream also penetrates the bricks or other masonry substrates above and below the mortar bed. The silane/siloxane reacts with the mortar bed and the bricks forming a permanent polysiloxane damp-course within the treated wall to prevent rising damp.
www.1800techdry.com.au

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@jitutalajia598 2 месяца назад

Thank you. Very useful

@nick2207 8 месяцев назад

I have rising damp, its in a terrace side wall. I have solid wood flooing nailed to the the floor at what height do this need to be installed at.

@1800techdryAu 8 месяцев назад

Generally if you are doing it from the inside then you want to inject the DPC cream as close to the timber floor level. The reason is that the cream can penetrate below the timber floor level to give protection to the timbers from damp. You can also do multiple injections of the cream each time the cream dissapears you can inject the hole again. This causes the DPC cream to spread further out from the injection point.

@nick2207 8 месяцев назад

Thankyou, I really didn't want to start ripping out the floor.

@checktheskies5040 3 года назад

Drill 155cm above floor 10cm five time and push (tube of chemical stuff) to absorb damp. Tubes can be found on YT.

@checktheskies5040 3 года назад

What about block wall with 7 year old insulation fibre in it? Any different in a 2 metre damp area?

@feennicks 6 лет назад

Im guessing water will still rise up until the it hits the silicone layer which will leave the brick work below still damp?...So the idea is to find ( in my case, dig ) down to the base or footings of the wall and inject in the brick work above that ?

@tech-dry5298 6 лет назад

Nick Pana might be easier you give me a call on 1800 832437 to discuss your situation. Happy to help Cheers Mark

@Ferncraft.Pembrokeshire Год назад

My wall is made of welsh slate. Can this permeate the slate as it's extremely dense.

@tradingco2830 6 лет назад

Which solutions treat the cause and not just the symptoms of rising damp?

@damo87araimo 7 лет назад

My brick wall has been rendered. Do I have to remove the render first?

@tech-dry5298 7 лет назад

Dahmian John no you don't need to remove the render first. Tech-Dry dpc cream can be injected into the brick directly if you don't know where the mortar line is.

@damo87araimo 7 лет назад

OK. Thanks for the reply :)

@nimakhaleghy4501 5 лет назад

You wall is damp with the neighbor . It's a thick Victorian wall. It's 3 bricks .i can't have/ drill my holes in my neighbors bedroom. Do I have to go all the way to my neighbor bedroom ?

@al3xdragos01 Год назад

Can I inject the cream into the actual brick?reason I ask as I see on my wall there are already holes at the depth and space required but they are not into the mortar line (they are into the brick) so i wound want to make new holes.thanks

@1800techdryAu Год назад

Yes you certainly can inject into the brick. The DPC cream works well in solid concrete walls

@bhujukp 9 лет назад

I like this movie

@retrowrath9374 7 лет назад

I had a issue figuring out the depth of my wall, drilled through the wall a few time and figured it out on a single wall. I hope the stuff works. I thought I had a double wall, found out I was drilling into the cellar below the room floor, next brick up, single brick wall. LOL

@GlossaME 3 года назад

What's the feedback?

@JiangxenPeter 5 лет назад

Is it safe to inject from the inside into the mortar of the inner skin of a cavity wall? I mean, is the chemical safe for inside use?

@tech-dry5298 5 лет назад

JiangxenPeter Yes it certainly is

@faolteam 4 года назад

What if i cant see the mortar line on the cavity block as it is plastered over ?

@tech-dry5298 4 года назад

faolteam that’s ok you don’t have to go into the mortar line we only recommend as it is easier to drill and easier blend the hole back in to the mortar line with a bit bit more mortar. Simply mark out the line at the base of the wall and and drill 80mm centres Tech-Dr DPC works through the mortar and the brick work

@dustyjames29 8 лет назад

I understand that the cream works were the holes are drilled,but what about the mortar inbetween the drilled holes,surely damp will rise through were the cream isnt injected.Can you explain how the hole brick becomes damp proof.

@1800techdryAu 8 лет назад

Once the cream has been injected into the holes the Tech-Dry cream will spread out in a 360 deg direction. Typically penetrate half a brick up and half a brick down from the mortar line hole.

@retrowrath9374 7 лет назад

How long does it take the cream to spead?

@db7948 5 лет назад

The flexible tube would be a nightmate to get in to the second brick on a cavity wall. Should provide a rigid tube for that

@amandahaarhoff1913 4 года назад

X do we have to take the plaster off the wall along skirting?

@mohamedezequiel9458 3 года назад

pro trick: you can watch series on Flixzone. Me and my gf have been using it for watching loads of movies recently.

@ezraadonis9788 3 года назад

@Mohamed Ezequiel yea, have been using Flixzone for since december myself =)

@AdrianHedley 9 лет назад

is it effective if i drill the brick directly? i nd to install it but my brick is about 25 cm high and cant see the mortar below.

@1800techdryAu 9 лет назад

Adrian Hedley Hi Adrian, Yes it is however I would inject the holes twice. Once the cream has been injected once and has dissolved into the brick then inject again. It will just make sure it spreads right through and links up, mainly a precaution. Cheers

@francisgbedzeha7579 2 года назад

@@1800techdryAu please sir we to buy the material

@thehaffytaffy 6 лет назад

Can this cream be used internal walls or is it for external walls only ?

@tech-dry5298 6 лет назад

Yes it can be injected into either

@1800techdryAu 5 лет назад

Yes can be used for both

@kevinwinter6142 4 года назад

where can I get this product ????????

@tech-dry5298 4 года назад

Kevin Winter you order directly online at Www.1800techdry.com.au Cheers

@paulwilliams8536 5 лет назад

Will this work on stone walls

@1800techdryAu 5 лет назад

Yes it does, If it is a rubble wall generally follow the mortar line in and around the stone. The Tech-Dry DPC will penetrate both the mortar and stone

@robtatum5277 4 года назад

No it dosent check out pete ward videos please you need breathable products so lime mortars ,plasters

@beagleandme 5 лет назад

My house is on a slab and I have rising damp coming up through the slab. They think the moisture barrier failed. So I have laid dimple membrane in 3 rooms and put flooring on top of that. But I would really like to permanently stop the rising damp and be able to place flooring straight on the slab. Do you have any idea what I can do to fix it?

@ompk142 4 года назад

Is putting membrane helping. If So then you are lucky to have it hidden under the floor. Otherwise it is devil .

@willandelfie 4 года назад

No such thing as rising damp

@1919mum 4 года назад

do explain .

@AlastairGibb-sn1vc Год назад

Go and hunt down something like heritage house websites that explain how your walls were designed to work... often the case that its when the introduction of modern 'barrier' materials happen it causes the troubles...