Dream Shop Ep3: Man Door in a Pole Barn

Подписаться 167 тыс.

Просмотров 39 тыс.

50% 1

I added a man door to my metal pole barn shop! The only other man door was on the opposite side of the building which was less than desirable. And using the sliding doors would greatly increase cooling and heating costs. So I put a man door into what will be the office, which also creates a sally port for the climate control! Overall it was a pretty simple project - despite my hideous interior framing. The main consideration there was just being able to add drywall since the interior framing was nonstructural.
Article: ycmt2.com/blog/dreamshop
TOOL GIVEAWAYS
Every month on Patreon I have a contest that just requires you to answer a question I post. Patrons at all levels are eligible, but higher levels have more perks! Join the contest at: / youcanmakethistoo
VIDEOS REFERENCED:
Dream Shop Playlist: • Dream Shop
CHANNEL SPONSORS:
TotalBoat visit ycmt2.com/discounts for discount code
Rockler rockler.com?sid=AFY08
Mirka mirka.com
Penguin CNC: pcncinc.com Use "YCMT2" for $300 off!
MY TOOLS
ycmt2.com/tools-i-use
SOCIAL MEDIA
Patreon: / youcanmakethistoo
Facebook: / youcanmakethistoo
Instagram: / youcanmakethistoo
SERVICES I USE
Music: Epidemicsound.com and AmpleTunes.com
Editing: Ilia Petrov
Motion Graphics/Plans: JP @ / foxhallwoodworks
Thumbnails: bit.ly/YCMT2MonsterThumbnailsAff
Closed Captioning: bit.ly/REVcomAffiliate ($10 coupon for you)
Some links to merchandise may be affiliate links and I may earn a commission on qualifying purchases.

Хобби

Опубликовано:

2 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@thewayidoit8895 7 месяцев назад

Nice video. I was searching for ideas on installing a door in a pole building. My understanding is most doors in big box stores are for ordinarily constructed homes with 2x4 walls. Ideally, the hinge pivot should be inside the building in a location so the doou can have a full 180 degree open swing. The brickmould is included and attached for that common opening. My understanding to install a door like this in a wall of unknown thickness you must remove the brickmould first. Then locate the hinge in your opening at the desired location and mount the doir as you did. After that you build a "jam extender" and replace the brickmould or in aome cases you can simply opt for a different style trim like your j-channel against the jam extension. Often the jam extension is covered with metal (usually requires a brake). What do you think?

@YouCanMakeThisToo 6 месяцев назад

Exterior doors are normally inswing so an intruder can't pop the hinge pins and pull the door out of the jamb. Having the hinges flush with the interior wall surface does provide maximum swing.. assuming there isn't something in the way. I have a wall that block 180' swing, and then I put a cabinet in that corner, that limits my swing before the way I installed my door limits it. The way you're describing it would have been a cleaner looking install and what I'd do if I was installing in a home or something.

@robert.brokaw3829 3 года назад

Glad to see the new shop is getting put together. Good luck with the new location and stay safe. Like your sons helmet - cool

@YouCanMakeThisToo 3 года назад

Thanks so much! They both have pretty awesome helmets like, they're a lot of fun

@TotalBoat 3 года назад

We are loving seeing your dream shop come together! The door looks great!

@YouCanMakeThisToo 3 года назад

Thank you! It's so nice to have, and I super appreciate you guys being a part of it!

@bgirdler 3 года назад

Hey TotalBoat! Hey idea why how code isn’t found when trying to check out?

@LogHouseFarm 3 года назад

The door looks like it belongs there, a job well done!

@YouCanMakeThisToo 3 года назад

Thank you!

@BruceAUlrich 3 года назад

That's going to be so nice to have! Good call putting it on the house side.

@YouCanMakeThisToo 3 года назад

It's already been awesome, especially now that the weather has turned on us

@Kkuts37 3 года назад

Looks awesome!! Great job!

@YouCanMakeThisToo 3 года назад

Thank you!

@lorenmeyer5290 3 года назад

Looks great!

@YouCanMakeThisToo 3 года назад

Thanks!

@theshop5331 4 месяца назад

Thanks for posting, good info. So sad correct elevation wasn’t considered initially. That siding in the dirt is disturbing.

@rnxpx Год назад

Needed this! Looks great!

@YouCanMakeThisToo Год назад

Thanks, glad it helped!

@DonnyBwelding1 3 года назад

Beyond excited for you brother ! Congrats!!! I know u worked ur ass off for it ... I seendt it!!

@YouCanMakeThisToo 3 года назад

Thanks, Donny! Much appreciated, it's been quite the journey.

@TarshaHomestead 3 года назад

I did a pinpad entry into my shop too. Very very handy. I have a bathroom framed out inside but not an office. I’m a little bit jealous of that.

@YouCanMakeThisToo 3 года назад

Several years ago I picked one up on a heavy discount for the house. Immediately fell in love with it, took a few days but my wife agreed that we'd never live without them anymore, haha. Have them all on the entry doors and the shop door now. A bathroom would be nice.. I need to see if the drain is tied to the septic system or not. If it is, I might add one.

@TarshaHomestead 3 года назад

@@YouCanMakeThisToo yeah, I have one on the house too. Total game changer!

@janetc4306 2 месяца назад

Thanks so much!

@jeepman876 10 месяцев назад

Appreciate the video. Thanks

@YouCanMakeThisToo 9 месяцев назад

Thanks for watching!

@xymbolic 3 года назад

Nice door!

@YouCanMakeThisToo 3 года назад

Thanks! It's quite well hung.

@calleeharris4182 3 года назад

Chugging along!!

@YouCanMakeThisToo 3 года назад

One step at a time!

@JimPepperTactical 3 года назад

Looks good. May I suggest some of those long deck screws in your latch plate in case someone really wants to try to get in. Also, the touchpad locks are pricey but worth it, the shop is always locked and its easy to open.

@YouCanMakeThisToo 3 года назад

I love touch pad locks, they're so nice. And I really like being able to make sure it's locked from my phone anywhere. And I did use the long screws in the latch plate for the lock, great tip there.

@JimPepperTactical 3 года назад

@@YouCanMakeThisToo ok at 9:43 it was the short factory screws so just thought I’d offer my 1 cent! Wish I was there to help convert that place, I’m actually good at building, unlike woodworking lol

@YouCanMakeThisToo 3 года назад

@@JimPepperTactical Yep, that was just for the door handle. Best practice would be for both.. but I normally just do the dead bolt - cause I almost never lock the door with the deadbolt anyway. Defeats the purpose of the keypad

@AjGalloway95 3 года назад

Thanks!

@YouCanMakeThisToo 2 года назад

Thank you!

@leondraw1766 10 месяцев назад

I want to do the same thing but my shop was built six years ago so I have to deal with electrical wiring.

@YouCanMakeThisToo 9 месяцев назад

Like it's where you want to put the door? That's a hassle.

@dwwoodbuilds 3 года назад

Progress! Was wondering if you were going to gravel the outside edge. I'm sure you have already thought about this (and other's have suggested) but have you considered a small concrete pad at the entrance of the new man door? Mentioning this because limestone gravel will continue to make dust that will then get tracked into your office. That mess gets old fast. Also caught your "I wish it only cost $20K" comment.. Yea, most people have no idea how much concrete, etc costs. With the covid pandemic, everything is more expensive. Keep it going and best wishes! (have your son help with shoveling the gravel along the edge! :)

@YouCanMakeThisToo 3 года назад

Yes, and yes! Initially the plan was just gravel. Then I realized I need a door mat and boot brush, so I'll also do a small pad there at a minimum. Still torn on whether or not I'll do the whole thing in concrete... probably not. And yeah, the budget is $20k just to convert the building into a shop.

@mariushegli 3 года назад

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@YouCanMakeThisToo 3 года назад

Much appreciated

@bobgolden5006 9 месяцев назад

Good job. I am planning on installing a door into my metal shop but I have never done that before. I wish your video contained more detail for the novice. I think that your video is not adequate for a novice and not necessary for someone that has done this before. Anyway, at least I have an idea of what is involved. Thanks.

@YouCanMakeThisToo 8 месяцев назад

Sorry you didn't find it particularly helpful.

@jg413 8 месяцев назад

What did he miss??? You need to stop 15 min in, drink a bottle of water, take a break at 45 min in and have a smoke…. Take lunch after 4 hrs….

@keithspencersr.6806 3 года назад

Nice, pavers for step

@YouCanMakeThisToo 3 года назад

I'll do a small pad for it.

@StevenDavisPhoto 3 года назад

Great job. Why the big window? Just asking for a break-in.

@YouCanMakeThisToo 3 года назад

For natural light in the office. I've spent enough of my life working in windowless rooms. Does it increase risk? Maybe. I'm in a rural area, the building will have an alarm, and there's already a window in it anyway.

@StevenDavisPhoto 3 года назад

@@YouCanMakeThisToo cool. Sounds worth it. I work with my garage open.

@HaroldHill76 3 года назад

Genuine question: shouldn't the 2x4s on the door header be on edge, not on face? I know structurally it doesn't matter much, but that's always been my understanding for door headers.

@YouCanMakeThisToo 3 года назад

For anything with a load, yes. I turned them the way I did just for expediency since there's no load at all on it. It's faster because doubled up 2x material is only 3" thick, but the 2x4s are 3.5" deep. So they need a plywood spacer to bring them to the same thickness. Or... just turn them the "wrong" way. Again, only did that just because the only thing this will carry is the weight of the drywall that'll go on it.

@HaroldHill76 3 года назад

@@YouCanMakeThisToo Thanks for the response! Totally fair time-saver in this use case, just wanted to make sure my info was right.

@murrayandru7527 Год назад

@ 2:24 Purlins on the roof , Girts on the Walls

@YouCanMakeThisToo Год назад

Thanks!

@kyloren8133 9 месяцев назад

What type of spray paint did you use and color?

@YouCanMakeThisToo 8 месяцев назад

Krylon or rustoluem, whatever was at the big box that closest matched my trim.

@JkCanvas 3 года назад

I thought when you checked level on the vertical axis that was plumb?

@YouCanMakeThisToo 3 года назад

Sounds like fake news to me

@JkCanvas 3 года назад

@@YouCanMakeThisToo 🤪🤪

@YouCanMakeThisToo 3 года назад

If I use a level to check it, it’s level 🤣

@JkCanvas 3 года назад

@@YouCanMakeThisToo okie dokie. If you say so.

@santoslabastida5843 2 года назад

What kind of door and here did you get it?

@YouCanMakeThisToo 2 года назад

It’s a 3-0 steel half life exterior deer with integral blinds. I bought it at Home Depot. Pretty much any building supplier will have it, or similar.

@kyloren8133 9 месяцев назад

Is this channel dead? What type of spray paint and color did you use?

@YouCanMakeThisToo 9 месяцев назад

Close but not yet. It was rustoleum or krylon, whatever the box store had that closest matched the piece of trim I brought in

@tylerratliff703 3 года назад

How much was that door?

@YouCanMakeThisToo 2 года назад

Around $250 I think. The inside blinds added a lot

@jeffjones4006 2 года назад

I wish you guys would use proper terminology for plumb verses level.

@YouCanMakeThisToo Год назад

I wish people wouldn't get hung up on semantics when context provides the clarity needed.

@MLMcCarren 5 месяцев назад

Why do people feel they are qualified to post a RU-vid tutorial on a given craft, despite obviously limited knowledge of that craft?

@YouCanMakeThisToo 5 месяцев назад

I met the requirements

@MLMcCarren 5 месяцев назад

@@YouCanMakeThisToo The first clue came when you said... //"This metal is pretty verticle."// ...huh? Are you trying to say that the vertical siding is plumb? The second clue was at about 4:20 - 4:35... lol Third, you certainly didn't need that mastic or the tube of caulking you placed under that threshold. Setting the J-channel in a bead of caulk around the brick molding would be more than sufficient e.g. with 8 foot shed roof over the area. Forth, you generally shim a prehung door with it closed to assure uniform spacing between jam and door. My point being that while what you've done appears to be adequate, you clearly aren't coming from a position of expertise. I do applaud your initiative. Too many people think such tasks to be overwhelming without even trying. Nothing ventured, nothing gained, right?