Dremel 4300 VS Cheap Rotary Tool (This Video Can Save You $100!)

Просмотров 9 тыс.

% 118

By Comparing The Exceptive Dremel 4300 And A Cheap Rotary Tool, This Video Reveals Which Tool Is The Best For You. ***💲Get The BEI & HONG Tool: amzn.to/3LW6w8D ***💲Get The Dremel: amzn.to/3SmBTv4 ***💲Get The Other Cheap Tool: amzn.to/3XPztXf
*BEI & HONG (aka Alloyman) %10 discount code: 10P2V553
*The code can be applied to all tools on their official website: alloymantools.com/
*I think you might be able to get the same deal with a promotion currently running on Amazon: amzn.to/47HDn9z
📝Disclaimer: This video is NOT sponsored but BEI & HONG sent me their rotary tool for free (I bought the Dremel). The attached products and resources may be affiliate links. ( :
📕Show Notes📕
1️⃣ Purchase Rotary Tools:
Dremel 4300: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qa6x-c-UdsE.html
NUE MASTER (Cheap Corded Rotary Tool): amzn.to/3XPztXf
BEI & HONG: amzn.to/3LW6w8D
BEI & HONG (Official Website): alloymantools.com/products/bei-hong-12v-cordless-rotary-tool-6-speeds-to-35000-rpm-with-2-0ah-battery-and-charger?_pos=1&_sid=c3c393a0f&_ss=r
2️⃣ Dremel 4300 Review:
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qa6x-c-UdsE.html
3️⃣ NUE MASTER (Cheap Corded Rotary Tool):
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0ykXaHaGx4Y.html
4️⃣ 🎉 FREE 5-Step C.R.A.F.T. Framework - Make Your Best Projects: thoughtful-knitter-1761.ck.page/d3a6425d22
------------------------------
💲Find Tools and Reviews on The Maker Brain Amazon Storefront: www.amazon.com/shop/makerbrain
♥️ If You Love Maker Brain, You Can Support My Work With The "SUPER THANKS" Feature.
------------------------------
⬇⏰⏰VIDEO CHAPTERS⏰⏰⬇
0:00 - Are Cheap Rotary Tools Good?
0:25 - Build Quality
2:49 - Noise Level
4:10 - Accessories
6:22 - The Case
7:44 - Power
9:30 - What Tool Should You Buy?
QUESTION OF THE DAY:
💡❓ When do you buy expensive tools and when do you think it is better to go with cheap options?❓💡
- I read and reply to every comment so I would love to hear your answer in the comments below!
📜 About the Video:
In this video you learn the differences between cheap and expensive rotary tools. This video compares the premium, pricy, and expensive Dremel 4300 with the budget friendly cheap BEI & HONG cordless rotary that comes in under $40 when on sale.
#MakerBrain #EliTennant #cardboardcrafts #crafting #cardboardproject #craftingideas #craftingtutorials #crafttools #CardboardBasics #diy #diycrafts #diyprojects #diyvideos #diyideas #diycraftswithpaper
📽️Gear Used To Shoot My Videos📽️
- Camera: Google Pixel 7
- Accent Lights: amzn.to/3Ey6lgl
- Main Light: amzn.to/3EsHbj2
- Lavalier BOYA BY-M1 mic: amzn.to/3YU88Vb
- Movo VXR10 mic: amzn.to/3lY2NNS
- USB podcasting condenser mic (similar): amzn.to/3xN8DV6
🏆Maker Brain Mission:
It is my mission to help you access and implement your God-given creativity through DIY cardboard projects. On this channel, you can expect weekly Tips, Tools, or Tutorial videos focused on helping you reach your full crafting potential.
🔵 Discover all the videos from Maker Brain on the Channel Page HERE ➡ @Maker Brain
Thanks for watching and God bless you!
~ Eli Tennant

Хобби

Опубликовано:

14 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@MakerBrain 9 месяцев назад

QUESTION OF THE DAY: 💡❓ When do you buy expensive tools and when do you think it is better to go with cheap options?❓💡 - I read and reply to every comment so I would love to hear your answer in the comments below! 📕Show Notes📕 1⃣ Purchase Rotary Tools: Dremel 4300: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qa6x-c-UdsE.html NUE MASTER (Cheap Corded Rotary Tool): amzn.to/3XPztXf BEI & HONG: amzn.to/3LW6w8D BEI & HONG (Official Website): alloymantools.com/products/bei-hong-12v-cordless-rotary-tool-6-speeds-to-35000-rpm-with-2-0ah-battery-and-charger?_pos=1&_sid=c3c393a0f&_ss=r 2⃣ Dremel 4300 Review: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qa6x-c-UdsE.html 3⃣ NUE MASTER (Cheap Corded Rotary Tool): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0ykXaHaGx4Y.html Have a blessed day, - Eli

@CaseyRoseAlwaysPositive 9 месяцев назад

Every tool is an investment, either long or short term. 💰= ⏲ ~ Myself, if I decide to buy a tool, I'm shooting for or the LONG term. To me, buying a tool for the short just isn't worth the investment. . . . . . . . also, a good, well crafted tool, you only have to buy ONCE. 😉 PS. Another great video, (Thanks Eli), and as always, Have a Blessed Day ! 🙏

@MakerBrain 9 месяцев назад

Very true. 👌 You pretty much just summarized my entire 10 minute video into one sentence, nice work 💯 I know a lot of people like you who play the long game investing in their tools and it is usually a wise move. As for me, my 19 year old college student budget forces me to see the value in cheaper options 😅... but I still love a nice too when I can afford it. Have a blessed day, - Eli

@CaseyRoseAlwaysPositive 9 месяцев назад

@@MakerBrain Thanks Eli ! 🙂👍 "Staying within one's budget" is paramount to just about anything else, lol. . . So, I hear you loud and clear, on that brother !! (often I'll save some hard-earned cash, by buying some no-name consumables, like sanding discs, barrel drums, ect.) 😉 ~ As always, stay blessed. 🙏

@johnmckee7937 5 месяцев назад

1 when use it professionally to make money. 2 use it daily for several different functions. 3 just have enough money to spend on anything you want. Let's be real

@matthewsamard4591 5 месяцев назад

Harbor Freight Sells a rotary tool that comes with 80 accessories, includes 2 collets, and they are interchangeable with Dremel. For $10! I was quite surprised myself, I thought I was buying an accessory kit, yet when I opened it up it had an actual rotary tool included. Again, ONLY $10 BUCKS! It's actually pretty decent too.

@MakerBrain 5 месяцев назад

Wow, Matthew! That is a great find. I hope it serves you well! Blessings, - Eli

@vinnierkc 6 месяцев назад

Great video! Thanks 👍 Keep it up! 💯

@MakerBrain 6 месяцев назад

Thank you! I really do appreciate the encouragement. Have a blessed day, - Eli

@danielrosborne 6 месяцев назад

Helpful video, thanks! I tend to look at the longevity of the tool. If it's something I really don't think I'll use more than once or twice or not often, then cheaper is the way to go, but if I am going to be using it for a long time... I'll go more for quality.

@MakerBrain 6 месяцев назад

I agree with your sentiment. If it is a tool that I know I will use, I will go with the good brands.

@johnmckee7937 5 месяцев назад

It all depends on what you're use for rotary tool is. In my case I find a cordless tool most useful. I only use it for grinding and cutting. A less expensive tool has worked out great for me.

@MakerBrain 5 месяцев назад

You make a really good point, John. Before buying a tool it is good to have a clear picture of what you will use it for. That way you only spend as much money as you need and still get a great result. Honestly, I think that most people with a rotary tool probably only use it for one or two different things on a regular basis. Have a blessed day and thank you for commenting! - Eli

@noreenpurple8617 7 месяцев назад

Great video! Thank you! I’m personally purchasing the cheaper one only because I’m using it for around the house projects. I’m not in any type of business that would require me to have a more dependable and expensive tool. Blessings!👍🏻

@MakerBrain 7 месяцев назад

Cool, I hope it serves you well! It is good to know what kinds of tools you need! God bless, - Eli

@jacquelinerozovskaya3297 7 месяцев назад

Hi 👋 Thanks for this video! I’ve just got my first dremel and noticed blinking white light inside the tool body while it turned on. Could you please advise if it’s ok or I’ve got some defective one. I’ll really appreciate your answer, pretty nervous about if it’s some kind of electric sparks 🙈

@MakerBrain 7 месяцев назад

Hi, Jacqueline 👋 thanks for the question. I am not a professional but here is what I know: If your Dremel plugs into the wall this is not normal. Corded tools have a different kind of motor that shouldn't spark (because the electricity from the wall outlet is AC) If it is a battery powered tool and has a brushed motor this is more normal. Batteries provide DC electricity which means that as the motor spins it is completely connecting and disconnecting (if it didn't do this it wouldn't spin). Sometimes this connecting and disconnecting can cause sparks - especially when you start it and sometimes when you stop it. If the spark seems really big or happens randomly while the tool is running I would definitely contact support. Honestly, if I were you I might contact Dremel just for piece of mind. They are a big name brand company so I think their customer service should be solid. Lastly, if your tool says it has a brushless motor then I don't think it should have any sparks. So, just like if it plugs into the wall, if it does have sparks I would contact support. I hope this helps . Have a blessed day, - Eli

@andrewavellino6427 7 месяцев назад

In all honesty, rotary tools aren't too expensive so you buy both! but regardless cordless has now surpassed corded tools,for rotary tools examples look at the Dremel 8260,the Milwaukee M12, the Ryobi HP brushless is by far the most powerful cordless. I have and use all these and still have corded ones hooked up to flex shaft and the Dremel drill press.

@MakerBrain 7 месяцев назад

I think you're right, Andrew. If you're really into power carving and using rotary tools, it is smart to have corded and cordless rotary tools... Especially if you have a flex shaft. Thank you so much for commenting! Have a blessed day, - Eli

@lukas______ 6 месяцев назад

Would the Ryobi rotary wireless be good to cut through a center support/carrier bearing on a driveshaft/propeller shaft? Doubt it but thought I'd ask before buying a multi tool or cut off tool (idk which of the latter would be best)

@johnmckee7937 5 месяцев назад

One more piece of advice, buy the best tools you can afford. Then if they break or wear out buy better ones.

@MakerBrain 5 месяцев назад

That is good advice. Also, getting a cheap version of the tool helps you learn what features you actually want and use. That way when it comes time to get an upgrade you know exactly what you need. Thank you for the comment and have a blessed day! - Eli

@user-et7se9uh4k 8 месяцев назад

If you are reading this, I just wanted to say Thank You for watching this video. Have a blessed day, - Eli

@UncannyBobRoss-UBR 8 месяцев назад

What do I do if I don’t have any blades in my house how can I cut cardboard 😢 that’s my question pls answer it next video

@MakerBrain 8 месяцев назад

Thank you for the comment, I would be happy to make a video about this... For clarification, you have known knives, scissors, or any other blades in your house and want to know a way to cut cardboard? Thanks, - Eli

@johnmckee7937 5 месяцев назад

Box knife with break off blades, available all box stores. Less than 5 dollars.

@BigpapamoneymanMVPtypebeat 3 месяца назад

If you can’t figure out how to cut card board you shouldn’t be handling power tools lol I almost want to suggest scissors or box knife (made for cardboard 🥴) but I have a feeling you’ll hurt yourself and I’ll be guilty... ask your parent or care taker to handle this one 🤙🏼