Drillmaster Trim Router Unbox Thorough Review Tips And Tricks

Подписаться 176 тыс.

Просмотров 376 тыс.

50% 1

#NSaleOnRU-vid
Drillmaster Trim Router Unbox Thorough Review Tips And Tricks
(paid links)Drillmaster Trim Router At Amazon: amzn.to/1Wb2Qwn Or Ebay: goo.gl/iJXonh
12 Piece C2 Tungsten Carbide Tip Router Bits At Amazon: amzn.to/2GVWt4s Or Ebay: goo.gl/T4UkbT
24" Clamp and Cut Edge Guide At Amazon: amzn.to/1LUa7PI Or Ebay: goo.gl/yrQpJc
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Facing Cam: amzn.to/2P9bazV Or eBay: goo.gl/7WkzYb
Overhead Cam: amzn.to/2E4kiF8 Or eBay: goo.gl/kqeoVv
Handheld cam: amzn.to/2Qmh2e5 Or eBay: goo.gl/KAiZyX
Video Software: amzn.to/2SjNKdf Or eBay: goo.gl/CdWBwG
Desktop Capture: amzn.to/2SgVaxQ Or eBay: goo.gl/LYNC3f
Mic: amzn.to/2KFj43r Or eBay: goo.gl/yC8uMC
Mic Wind Filter: amzn.to/2ScZdes Or eBay: goo.gl/HruSsJ
Lens: amzn.to/2Sj4S2G Or eBay goo.gl/C1z9vE
Lens Filter: amzn.to/2P2zN1n Or eBay: goo.gl/U3psNL
Wind filter for handheld cam: amzn.to/2P7TYuA Or eBay: goo.gl/wwRtEk
Selfiestick dslr: amzn.to/2TUR4gn Or eBay: goo.gl/Rtzrrd
Tool box: amzn.to/2E3r8dQ Or eBay: goo.gl/houqn4
Laptop stand: amzn.to/2E24dzH Or eBay: goo.gl/ZfXhT3
Studio mic: amzn.to/2Q2FO3w Or eBay: goo.gl/bHnT8Z
Tripod Neewer Professional 61 inches: amzn.to/2VnotkL Or eBay: goo.gl/GfNGGT
Neewer Lightweight Portable 66"/168cm Carbon Fiber Camera Tripod Monopod At Amazon: amzn.to/1rsQN5l Or eBay: goo.gl/AxonTQ
Tripod Neewer Alluminum Alloy 62": amzn.to/2LIbEwW Or eBay: goo.gl/ao5nss
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Last update 01/18/19
Drillmaster Trim Router Unbox Thorough Review Tips And Tricks
Last updated 01/03/19

Хобби

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 389

@4rnorthwest 5 лет назад

Just a tip when using most router and ESPECIALLY a trim router: no matter the bit, when the intended depth is the entire available cutting capacity of the bit blades, MAKE MULTIPLE PASSES! never blow through your material in a single full depth pass. It will burn your work, overheat and warp/damage the bit and is also dangerous. Larger routers with more power can handle it (usually) on bits with a 1/2” shank no problem though it’s a waste of the life of a bit. But on 1/4” shank bits though available in almost the same size cutting surface as a 1/2” shank bit, IS DANGEROUS in full depth cuts! Take multiple passes. The cut should feel and sound smooth and consistent when cutting. If you’re hearing and feeling chattering, your cut is either to aggressive for the router, the bit or both. Thanks for the review and be safe folks!

@richardlloydusa 5 лет назад

Thank you for watching, commenting and the valuable feedback. I appreciate it greatly. All the best.

@aros007z Год назад

True….I also find multiple passes are better than just one big hog out pass!

@danmunoz4348 Год назад

I hope you realize how deeply appreciated videos like this are!

@richardlloydusa Год назад

I'm flattered and touched. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@nilly-rosilly3347 4 года назад

What an EXCELLENT review! You not only covered the unwrapping, but actually demonstrated (for us newbies) how to put it together! And you actually showed how well the router performs using a couple of different bits. You also covered the safety precautions that we must take when using the tool and so much more! If I had listened to another reviewer's video, I would have never purchased this router! From the very beginning, he was totally negative about everything regarding this little tool! And he didn't even take the time that you did to properly demonstrate how it really works, yet he said he did not recommend it at all, that it was a total waste of money! So I want to thank you so very much for your great review because after watching you, I went ahead and purchased the router at Harbor Freight, and I'm super happy with it! It does everything I need it to do for me! THANK YOU!

@dandaluz1 10 месяцев назад

I bought this about 2 years ago, used it once and totally forgot how to use it. Your video refreshed my memory. A million thanks!

@richardlloydusa 10 месяцев назад

You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@edwardpresken 4 месяца назад

Best demonstration of the router and how to install and use of the guides ever seen so far.

@richardlloydusa 4 месяца назад

You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@baileysbootstraps8170 4 года назад

Been woodworking for about 5yrs. Made loads of signs in my early days, using a good second hand router. It was a big double handed beast with the power button on the right hand handle. Apart from the weight and size of the darn thing, carving 1" letters, you're thumb would cramp up BUT I kept using it for all this time thinking "Oh well this the way it has to be" Until today my son in law gave me a Black an decker trim router.....Set it all up, carved a couple of "sentences" and it was heaven...like carving butter with a sharpe pencil !!! Thanks for great vid and some super tips. It came without fence. But I've tried loads of tools with the fences and could NEVER get on with any of them. Subbed !

@rayatlast 6 лет назад

I bought this trim router over a year ago & still kicking. Great little tool. Thanks for your very informative video.

@richardlloydusa 6 лет назад

You are most welcome. Thank you for commenting and the kind words. All the best.

@wandabishop786 6 лет назад

So excited to have found this video. Just purchased one of these routers today and can't wait to try it out. I will be watching this video again before I get started! Thanks!

@richardlloydusa 6 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@TheUncleRuckus 5 лет назад

Nice to see someone who ACTUALLY knows how to use a router do a review of this! All the other videos I've seen the goofs are running them in the wrong direction (Clockwise) and then they complain that there's too much tear out and it's a piece of junk blah blah. It's like well if you actually knew how to use it I'm quite sure it would work just fine lol. Like the old saying goes A poor craftsmen blames his tools. So thank you so very much for making this video! I'm definitely going to pick this up to replace the $250 Makita trim router kit that was stolen by some scumbag junkie from my home along with 10k+ worth of tools I amassed over the past 30 years. Much appreciated👍

@richardlloydusa 5 лет назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@bobotto1786 Год назад

Thank you for sharing your knowledge. I needed this to learn how to use this trim router that after watching your video, I went to Harbor Freight and bought, along with 1/4 inch bits. Best router video I've found on RU-vid.

@richardlloydusa Год назад

@jerllouk9463 Год назад

What is the size of the base. I need a router 69mm.

@wavetrader742 5 лет назад

I'm a firm believer in the fact that you don't go to Harbor Freight for parachutes, scuba gear. condoms or whatever you must depend on as they generally hit a 95% functional level on most products they sell. This too might be the exception. I take exception to their advice about bottoming out the bit in the collet. If the collet ever becomes stuck in the armature shaft you'll be forced to pry the router bit out of the unit which will likely damage the cutting edges. I would suggest leaving a small amount of space below the bit so if it ever becomes stuck, a light whack on the end of the bit with a chunk of wood will dislodge it so it can be removed. Putting an "o" ring on the bit shaft makes it easy to locate a good depth and also eliminates the need to hold the bit while tightening. Don't forget to clean the collet and related parts so you can avoid the problem in the future.

@richardlloydusa 5 лет назад

Agreed. I think HF gives you a good value most of the time and they generally don't quibble on a warranty return so there is no real risk in trying the tools. Thank you for watching, commenting and the valuable feedback. I appreciate it greatly. All the best.

@vp2880 2 года назад

Very clear and detailed. Good explanations and demonstrations. A beginner like me found your video to be extremely helpful. Thanks!

@richardlloydusa 2 года назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@realitybytes3294 6 лет назад

Thanks for taking the time to make this video...it's been incredibly handy. Much appreciated!

@heatherott5665 4 года назад

This was by far the best training on the assembly and use of this tool, I bought it today and now I can't wait to use it!!! Thank you

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@strongmandiy 4 года назад

I’m still trying to figure out what the hell the plastic bracket is for

@-...Patricia...- 4 года назад

I just bought this unit myself. Thank you for this informative video. Well done!

@zepp3lin 5 лет назад

Just bought this budget Trimmer/Router. And I chance upon your video. Thank you for the in depth guide and lesson. Very useful. Subscribed.

@robynjessop7942 4 года назад

Fantastic video! I’ve used this router once before but didn’t get A+ results. Watching this thorough video I now feel like I can do a great job finishing the edges on the blast gates that I’ve made. Keep up the good work. Thanks!

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@noragodley1270 7 лет назад

I was about to return mine today... after finding your video I've changed my mind! So much more informed now. Thank you.

@richardlloydusa 7 лет назад

That's great! You are welcome. It's a great tool. Thanks for watching and commenting. All the best.

@DamnSkippy1 7 лет назад

Excellent and well done video. It answered all the questions I was wondering about with some bonus information, I was happy to learn. Thank you.

@richardlloydusa 7 лет назад

You are most welcome. Thank you for watching and the kind comments. All the best.

@retrogamepuppy1445 4 года назад

Really great in depth guide. Your reviews explain everything and make using this router way easier from the start

@pbrenneraz 7 лет назад

Thanks so much for the video. As a woman learning to use and love power tools, I really appreciate the level of detail. I can't wait to pull it out this weekend and play around with it. I used it once several months ago, but didn't get good results. I was trying to use the fence that came with it, but of course it had too much wobble to get a straight cut - I was using the router to clean up the inside edge of kitchen cabinet doors after cutting out the inner panels. Your explanation on reversing the direction of the wing nut makes perfect sense.

@richardlloydusa 7 лет назад

You are most welcome. I am glad I could help you understand how to get a better result with this tool. Thank you very much for watching and the kind comments. Thanks.

@desirene2008 5 лет назад

Very informative. Way better and clearer instructions than the manual. Great job!!!!!

@richardlloydusa 5 лет назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@djkrazymm502 5 лет назад

Now this is how a proper review is done! Good work man...

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@boudreaumay3040 8 лет назад

Richard this is really great walk thru on this. Thank you for your time and hints as i get my shop up to speed.

@richardlloydusa 8 лет назад

+Boudreau May You are most welcome. Thanks for watching and the kind comments.

@keithbard17 5 лет назад

Probably the best guide I've seen for any tool ever... Thanks Richard! I think I'll be picking up one of these routers next time I'm at HF. You're the MVP bud!

@richardlloydusa 5 лет назад

Wow! You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@la196 4 года назад

Agreed! Very good review. Even with the low price tag, it just goes to show you when you take your time and go slow and let the tool do it's job, it's a good bargain for DIY tasks. I was almost going to spend up to 3x on maybe a little more of a tool, but this review has now convinced me, this Drillmaster will be fine. Thanks for your time and the good tips. Thank you:) BTW, too bad the trim guide you demonstrated toward the end wasn't designed to pivot which would allow it to go a tad lower.

@lestergrenz5002 8 лет назад

Just bought mine today. Had to quickly look up how to use it. Great review and instruction!

@richardlloydusa 8 лет назад

Thank you very much.

@geraldzajd6010 4 года назад

Richard lloyd you saved my ass because I had no idea what those guides were that came with the router. Just like you saved my ass by showing me how to put that workbench together. It would have been a nightmare without your video. Your router video was wonderful I just wanted to let you know someone out there is watching your video and I thank you for taking the time to make these videos.

@lpena10 4 года назад

Thank you Richard very instructive, clear and informomative!!!

@larryjacobs5713 4 года назад

Best DYI video I have seen, thank you so much for sharing your knowledge.

@SpideyScott72 3 года назад

Just came across your video after buying this trim router. have not had a chance to test it out yet but found your video very thorough and easy to follow. Well done, thanks!

@dkquick72 Год назад

Thanks so much for this info. Exactly what I was looking for to get started with my router.

@richardlloydusa Год назад

@ramakrishnach3754 4 года назад

Curiosity Busted!... I wanted to trim some laminate along the edge of the countertop. I went ahead and purchased a trim router. At the shop, I was curious about the guides that came with the router the shopkeeper here in India told that The bit's bearing and guide's bearing should be aligned together so they roll against each other which I did and ended up damaging both the guide and bit which I had purchased both again. He also told to mount the straight edge guide the wrong way as shown in manual I ended up ruining my workpiece as the wing nut bounced to it halfway through, The router fell off my hand and I am lucky my feet escaped in the slight margin. Now this video was so so so thorough that helped me a lot and guided me towards right path of using this power tool. Although I would've been happy if some point is included about that plastic guide piece which I haven't find good use of yet, I couldn't thank you enough sir. Thank you, Thank You, Thank You!

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@1986yamahafazer69 4 года назад

Excellent job! Thanks for taking the time to make a video on this tool. Very informative!!!

@woodamiright7373 4 года назад

So many reviews on this that really shine on why not to buy, but this has made me think again! Thanks for the great review!

@Ghost6007 5 лет назад

Thank you for the great in depth review on this. I am looking to get a router for my small home projects and wanted to see how this one performed. Your review covers it well and also shows how to use the product in a simple accurate manner.

@richardlloydusa 5 лет назад

You are most welcome. Glad I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@ramaroodle 8 лет назад

Bought one cuz it was cheap about a year ago to use on smaller jobs where my Bosch was too big to throw around. Problem is that it doesn't have variable speed so on a lot of smaller jobs it's like a bull in a china shop. It's either on or off, but it is plenty powerful and solidly built. Bought a Dewalt DWP611PK variable speed the other day with the plunge base. Love it. You get what you pay for. Now I just keep a roundover bit in it with a 5"x5" 1/4 inch base dedicated to edge trimming.

@jayc3110 4 года назад

Excellent... Great review and lesson on this specific router... Thank you,

@rommelsace8349 5 лет назад

Thanks Mr Richard, I have been looking for instructional on how to use a trim router. I am new to it, definitely you provided me the know how to use the trim router. You bet I subscribe to your channel to see more. Again, my heartfelt thanks.

@user-ur2ly5jv8p 6 лет назад

Excellent video! Thanks for taking the time to post it.

@EndingTimes0 4 года назад

Thanks! I just bought one for making cigar box guitar necks. I was using hand carving tools before and it took ages to round the back over by hand...

@nancyjean3853 5 лет назад

Just bought another brand Router/Trimmer with no picture instructions at all. I am new to router tools so your instructions are very helpful. Thank You!

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@cozzyinternet4706 5 лет назад

same here @Nancy Jean cheers, Mr. Lloyd!! :D

@Sokx41 5 лет назад

I should say that i bought one of these trim routers about 10 years ago.

@jorgedante007 7 лет назад

Excellent and well done video.After see you video I decided to buy this guy.thank you for your explanation.

@aryabiswas6832 5 лет назад

Just bought one of these for a few odd jobs around the place. Your review was the best and the most helpful. Thanks for the extra tips/tricks. Keep up the good work!!!

@attilamtoth 4 года назад

Thank you for this video, made my project so much easier to finish and so much nicer looking too.

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@journeytravelers5420 10 месяцев назад

Thank you for extended assistance video posted , very informational and educational to learn this trim router :)

@richardlloydusa 10 месяцев назад

@mikeychris1989 7 лет назад

Richard, thanx for posting this video. I bought one of these trim routers yesterday, and thought I was just not smart enough to assemble the fences! The washer fix works great, but I had to use a 5/16" flat washer to clear the shoulders on the carriage bolt. My router also had an issue with the "edge knob" bolt being just a tad bit too long, making it hit the "lock knob" bolt. A few swipes with a file accross the end of the edge knob bolt cured that, although the Trim Guide Assy is of limited value (as you mentioned). I guess that little piece of clear lastic ("L" shaped with the center of one leg cut out) must be a guard to prevent debris flying out the side, but it is totally ignored in the directions. Seems like this is a good little trim router if you use it as that, with bits equipped with ball bearing rollers. Thanx again. Mike

@davidgourlay9547 7 лет назад

Bought this today. ...very informative guidelines on the pros and cons, thank you.

@richardlloydusa 7 лет назад

You are most welcome. Thanks for the kind comments and watching. All the best.

@lindyferber 7 лет назад

Thank you for your very informative video. I got this router for Christmas, but have never used it (basically because I didn't know how). When I found your video, I feel like I hit a gold mine! Thanks so much.

@richardlloydusa 7 лет назад

You are most welcome. Thank you very much for watching and the very kind comments. All the best.

@cynthiareyes1495 4 года назад

Thank you. Your video was very informative. Thanks for taking the time to go step by step.

@embwee 8 лет назад

very timely vid, since I just purchased mine with the $19 coupon. Someone not-to-be-named reviewed the tool and instantly chucked the fence/guides. But watching this has helped me envision the many ways I can use this tool. In other words, thanks a lot!

@richardlloydusa 8 лет назад

+embwee You are most welcome. Glad I could help you with it. Thanks for watching and the kind comments.

@flitdek 4 года назад

what a wonderful and thorough review, great job.

@davidgantt3220 7 лет назад

just bought one today to...can't wait to use

@chamanrickheeram5099 4 года назад

Best review on RU-vid. Thank you

@ColdSig 9 месяцев назад

Thank you very much for this. Learned a lot.

@richardlloydusa 9 месяцев назад

@michaelpalmer4382 6 лет назад

Thanks for the great video. Just bought mine yesterday.

@richardlloydusa 6 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@jasoneustice8034 5 лет назад

You have done a great job showing me all I needed to know

@mprrx 8 лет назад

Thank you for taking the time, the only part you did not cover was the little plastic square, sort of, and yes, will practice on using trim router. Thank you again.

@grat2010 4 года назад

Awesome video. Thanks so much. Just bought this set up at HF and never used a router before. You're a fantastic teacher!

@michaelscott2269 Год назад

Great video from a novice…learned a lot and now I’ve gotta go purchase one of the clamping straight age…! Thanks very much…!

@richardlloydusa 11 месяцев назад

You're most welcome. I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@gndnone 6 лет назад

Great video. Didn't know how to use the guides until I watch ur video. Tks

@richardlloydusa 6 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@bencartwright9359 4 года назад

Thank you Richard. Great video.

@catb5223 8 лет назад

Very informative video! Being a beginner with wood work, I think this will be a good tool for me for mini DIY home projects. Thank you for making this great video!

@richardlloydusa 8 лет назад

You are most welcome. Thanks for watching. Glad I could help.

@wtam69 7 лет назад

Very clear and useful video, especially the use as a circle cutter.

@richardlloydusa 7 лет назад

Thank you very much. All the best.

@jayc3110 7 лет назад

Excellent video, especially for beginners not that familiar with routers. Thank you.

@richardlloydusa 7 лет назад

You are most welcome. Thanks for watching and the kind comments.

@Bright8888 8 лет назад

Thank you Richard for the nice explanation and demo of the trim router. I recently bought the 230V version of this router (in India). The design is identical and the price is less than half that of established brands like Bosch and Makita. The brand name mentioned on the sticker is Dongcheng and it is made in China. - The L-shaped clear plastic piece is described as "Chip deflector" in the booklet. - The base plate has provision for fixing a guide bushing. In addition to the other accessories, a 10mm guide bushing is supplied with the 230V version and it can be fixed by removing the four screws in the base plate. I have no clue as to why it is not supplied with the 120V version. - The no-load speed of the 230V version is 30000. The router is dynamically balanced and the motor runs real smooth when it is switched on. There is no speed control, but for the low price, this router is value for money.

@richardlloydusa 8 лет назад

+Bala Chandar You are most welcome. Thank for the new information and watching.

@erictownsend8711 8 лет назад

Thanks very much for taking the time. Very clear and thorough.

@richardlloydusa 8 лет назад

+Eric Townsend You are most welcome. Thanks for watching and the kind comment.

@Beobout6 5 лет назад

Thank you Richard. Great detailed review. This is so much better than reading tiny print directions. Lol

@richardlloydusa 5 лет назад

You are most welcome. I am glad to know I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@jorgedante007 7 лет назад

I bought this today, and the Washer for the guide is perfect,I didn't to change with number 8 washer.thanks again for your advise,I'm your new suscriber.

@richardlloydusa 7 лет назад

You are most welcome. Thank you very much. All the best.

@ebaybae3575 5 лет назад

Thanks for doing this video! Helped me a lot to better understand this new to me tool!

@richardlloydusa 5 лет назад

You are most welcome. I am glad to hear I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@pesoto74 5 лет назад

Thank you for this video. It is very helpful.

@jgg204 8 лет назад

got this for $18 after coupon over a year ago. used it for 1 table project and a slew of closet shelving projects. it's already paid for itself. if it broke this weekend i would have gotten my money's worth. no need to get a $150 Makita or Bosch unless you are an avid wood worker or you do work working for a living

@richardlloydusa 8 лет назад

+jgg204 If mine broke I would buy another to replace it too, but I don't see it breaking. Seems solid and reliable. Thanks.

@paulprs9703 8 лет назад

Excellent video many thanks I've just bought one of these and this has helped no end

@richardlloydusa 8 лет назад

You are most welcome. Thanks for watching and commenting.

@andystewart5864 4 года назад

Many thanks, this tool was the same as the Ozito trimmer available in Australia. (it came with no instructions or video links) Very helpful.

@BobPreis 7 лет назад

Thank you for this guide. Very helpful.

@richardlloydusa 7 лет назад

You are most welcome. Thank you very much for watching and commenting. All the best.

@CNTHINGS 6 лет назад

Thanks for the in depth review very helpful.

@richardlloydusa 6 лет назад

You are most welcome. Thank you very much for commenting, watching and the kind words. All the best.

@victorcttan 7 лет назад

Very resourceful video for me. Thank you very much sir.

@richardlloydusa 7 лет назад

You are most welcome Sir. Thank you for watching and the kind comment. All the best.

@SyahrinMasri 4 года назад

just bought a router and this video really help! tq

@johnw3789 8 лет назад

Thanks Richard, Learned more from this video than most all others.

@richardlloydusa 8 лет назад

+John W You are welcome. Thanks for watching.

@nostalgiakid84 4 года назад

Extremely helpful video. Thank you!

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@anthonywilson4873 4 года назад

Thank you for a good demo.

@kringles65 7 лет назад

What a great video. Really helps. You are much better than a manual. Cheers!

@richardlloydusa 6 лет назад

You are most welcome. Thank you very much for watching and the kind words. All the best.

@jzehn7 5 лет назад

Great video!! So much information covered thanks

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@crackerjack3359 7 лет назад

I have started making cigar box guitars. Big routers are overkill for rounding the necks and cutting the pickup holes. I picked up one of these small routers from Harbor Freight with 25% off coupon and was just opening the box when I saw your video. I thought hey, why not assemble it along with you. Thanks a bunch your video was very helpful. I will also be getting the guide clamp.

@richardlloydusa 7 лет назад

You are most welcome. Thanks for watching and the kind comments.

@WaldoGutierrez 4 года назад

Very helpful video, all i need to know about this tool, i just bought it. Thanks!!

@PacoOtis 8 лет назад

Thanks! Very thorough and my bewilderment should be included regarding the "L" transparent plastic piece. Regarding tools my goal has always been to not get anything bigger and heavier than needed and this router really fills a nice gap. I've a couple large ones and they are such a nuisance to handle. Again, Thanks!

@richardlloydusa 8 лет назад

+Joseph Stokes You are most welcome. It is a very handy tool. I have used it many times and loved the results. Thanks for watching and the kind comments.

@eilor87alfa 3 года назад

Very informative video, i like it; thank you for sharing.

@jlawson6073 6 лет назад

Thank you for this video. I was wondering how to get the roller guide to work, as you showed, it doesn't really back away from the bit to make a notch. A few other videos I found for this router weren't very good, and they made no attempt to use the attachments. I was hoping to make a simple picture frame as my first project, and I realise the guides won't work for that. I do like the clamping guide you have, I usually use my four foot aluminum level and some quick clamps as a guide for my sabre, circular saw, and rotozip. But I feel, after watching this video, that investing in a clamping guide is a great idea. It's been 30 years since my high school shop class and using a router. I am excited to use this router and your tips and tricks, thank you again for the video.

@richardlloydusa 6 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. All the best.

@BattleOfBowties 4 года назад

Best video on RU-vid explaining setup/using a router! A link of your video should come with a new routers lol! Thanks for this one!

@juanmartin3457 5 лет назад

Thanks a bunch, great video !! Now I'm your follower ! Rgds.

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@saibaz9447 7 лет назад

Thanks a lot sir for taking ur time to make very informative vid.

@richardlloydusa 7 лет назад

You are most welcome. Thanks for watching and the kind comments. All the best.

@jhrhiggi 4 года назад

I got my first router today this was really helpful thx

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@TheSocialPraxis 3 года назад

Thank you for sharing your wisdom 🤙🏾

@richardlloydusa 3 года назад

You're most welcome. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@skpshipley 5 лет назад

Great video. Very informative. Thank you.

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@jc.daguila 3 года назад

Thanks for your time.

@richardlloydusa 3 года назад

You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@jamesblake6943 4 года назад

Nice video.....really enjoyed it. I'm buying mine tomorrow !!

@shootgp 8 лет назад

Great video - I normally don't watch videos this long but yours' was worth it. You demonstrated every 'official' way to use this little tool that I can think of. I bought one after watching this but haven't yet had a chance to use it. I do intend to build a small table (maybe a little bigger than a large shoe box) to use this with in the future. I figure with a MDF top and some adjustable clamped-down guides it would perform even better than with the supplied guides.

@richardlloydusa 8 лет назад

+shootgp Thank you very much for watching and commenting.