Drop Tube Fittings for Pressure Washing Tank from Doug Rucker

Подписаться 19 тыс.

Просмотров 10 тыс.

50% 1

In response to viewer questions, I am glad to provide this Drop Tube Fittings for Pressure Washing Tank video for busy pressure washing business entrepreneurs. I see no reason for pressure washing startups to have to "reinvent the wheel" as you streamline your work to be more efficient, productive, and profitable. So in this video, I provide many different ideas, suggestions and ways to install drop tube fittings in pressure washing tanks.
There are two different videos that I mention in this video concerning Bulkhead Fittings that will also provide valuable insight along with this video.
• Bulkhead Fitting Insta...
• Installing A Bulk Head...
AND, there's a bonus video that explains how to keep the plastic shavings out of the tank when installing bulkhead fittings.
• Bulkhead Installation ...
This channel is committed to helping pressure washing business professionals grow and succeed in their skills and knowledge of the industry. If this video has been helpful, please subscribe using the link below and hit the BELL so you'll get notifications when I post new videos.
/ @pressurecleaningsch
If you are new to the pressure washing industry, you'll want to evaluate SOFT WASH SYSTEMS available on the market today. The KINGSLINGER is definitely one you'll want to consider.
www.dougruckerstore.com/produ...
Here is my KINGSLINGER Soft Wash System RU-vid Playlist!
• Soft Wash Systems (KIN...
I have several playlists but here is the one featuring STORE EQUIPMENT and ACCESSORIES.
• Store Equipment and Ac...
Are you looking to start a pressure washing business? Check out our training and mentoring opportunities at www.pressurecleaningschool.com/
I have an online video school with over 260 training videos that will help you drastically cut your learning curve if you are starting a pressure washing business. www.pressurecleaningschool.co...
Be sure to check out our 2 day MONTHLY Pressure Washing Classes and Training Schedule in Houston that includes job site training as well as classroom instruction. www.pressurecleaningschool.co...
For all your pressure washing equipment and supplies please visit
www.dougruckerstore.com/
Here are many of the tools and supplies that I purchase through AMAZON. These are items use on a regular basis that you may want to consider adding to your existing pressure washing business equipment. In full disclosure, as an Amazon Affiliate I do earn a small commission for qualifying purchases if you use my links.
www.pressurecleaningschool.co...
For any questions you might have about TRAINING, check out our FAQs page:
www.pressurecleaningschool.co...
For any additional questions you might have, please use the link to the school website below and scroll down to the CONTACT US section!
www.pressurecleaningschool.com/
For any questions you might have about our products from Doug Rucker Store, please use the link below use the CONTACT US form on the store website!
www.dougruckerstore.com/conta...
To stay updated, follow our social media pages!
/ pressurecleaningschool
/ dougruckerstore

Опубликовано:

27 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@alejandrobardo97 3 года назад

It’s crazy I have been trying to find videos the past few days exactly for this specifically. Thanks man

@PressureCleaningSch 3 года назад

Your welcome glad it will help

@GoldenState408 3 года назад

Amazing!! Thank YOU Sensei Doug, appreciate the concise , well explained step by step on how to build. Cant say enough how you are appreciated! Time to check out the Bulk Head installation video…

@PressureCleaningSch 3 года назад

Thanks CA, hope it helps and thanks for the suggestion.

@kmindeye 2 года назад

Always appreciate your consise, and too the point delivery. So many videos just go on, and on, and, on.. Great information as always.

@PressureCleaningSch 2 года назад

Thanks so much.

@joesondag6801 2 года назад

Great info Doug. Thank you

@sharkwash2494 3 года назад

Great info as usual Doug 👍

@dustman361 3 года назад

You’re the man, Doug. Great vid!!

@PressureCleaningSch 3 года назад

Thanks Dustin appreciate it

@igorverdes 3 года назад

Thank you

@markhilby4024 Год назад

Thanks for valuable information!

@PressureCleaningSch Год назад

Very welcome. Glad it helped

@markhilby4024 Год назад

@@PressureCleaningSch I am setting up a Softwash manifold system this year after batch mixing first season last year and am excited about improved system. I am going to try the seals the hose is just run thru. I like the different bulkhead the pipe just goes into also and may experiment on something else. Thanks again! - MH in Spokane WA

@mikethemagicdj 2 года назад

Do the drop tubes for a 5.5 gpm soft wash system have to be secure or can you just drop a 1/2" pvc pipe in your batch mix tank?

@enjoythesho1992 Год назад

Will a downstream injector pull from a 1/2 inch pipe ?

@mikehardin595 5 месяцев назад

I realize this has been up a couple of years, but wanted to ask, using the uniseal, does the braided line stay where it should near the bottom of the tank without curling up since there is no drop tube?

@PressureCleaningSch 5 месяцев назад

By itself It won’t. We use a 12-18” stick of pvc and a pvc 45 coupler to keep it weighted down

@bigrobbigrob7156 3 года назад

Hi Doug, my question is, can i plumb my 5.5 belt drive pressure washer through the top of my water tank and pull water safely to feed the the pressure washer? I realize plumbing it on the bottom is the usual way but my tank sits in a stainless steel case around the bottom of the tank. Do you know anyone that pulls water from the top of the tank with a drop stick?

@PressureCleaningSch 3 года назад

No I do not know of anyone that pulls from the top of a pressure washer....and thats not something I would do...just don't think you could get adequate flow to it.

@jonboysprowash7845 2 года назад

Hey Doug of all the different ways do you find one better than the other?

@PressureCleaningSch 2 года назад

I like the uni seals. So much easier

@jonboysprowash7845 2 года назад

@@PressureCleaningSch Thanks. Seems easier and less chance of leaks.

@PressureCleaningSch 2 года назад

@@jonboysprowash7845 exactly. No chance

@anthonyjohnson2242 2 года назад

Should I be using different size bulkhead fittings for each tank. Maybe 1/2 inch for soap tank and 1 inch for water and sh tank. Or does it even matter?

@PressureCleaningSch 2 года назад

Yes it matters depending on what your feeding. I use 1/2 for water and Bleach for my Kingslinger. 3/4 or 1 inch for a pressure washer.

@anthonyjohnson2242 2 года назад

@@PressureCleaningSch I'll be feeding a 5.5gpm everflo pump for softwash

@anthonyjohnson2242 2 года назад

With a blend manifold

@PressureCleaningSch 2 года назад

@@anthonyjohnson2242 1/2 is fine on the blend manifold, but I suggest using 5/8 hose to spray with.

@TimeIs_Money 2 года назад

@@PressureCleaningSch hello bud. I have a question I see people use 1/2 hose for spraying and 5/8 but more on the 1/2 hose . What’s the difference with the 5/8? What do you recommend sir? Also thank you for all the good content you’re putting out

@Davids-cc9sn 3 года назад

Why not pull soap directly from bottom of tank instead going up a tube and then out to whatever you're sending it to? I mean pull soap down thru bottom of tank. Then you'd have the weight of the soap on top pushing the soap out to your unit.

@lcm2017 3 года назад

You don't want to have any bulkhead fittings on your surfactant or sh tanks. Just in case you get a leak. Water tank it's o.k. to have a fitting on the bottom. Hope this helps.