DUAL 8" SUBWOOFER BASS TEST WITH PIONEER GM-D9701 MONO AMPLIFIER 

Thanks!

Thanks!

Thanks!

Thanks!

@@retromadness7777yo can you link the cable fasteners that you used

@@N64Guy I got them from local hardware shop

@@retromadness7777 that’s what’s up I’ll be on the lookout, the build is clean.

Its Pioneer, Its very good brand

It's just a simple bass knob received with the amplifier. I keep it at 0 most of the time.. Only when I am home alone, I increase above 50%

You just have to multiply the voltage with amps.. If you have two 30A fuses and you are applying 12v to your amplifier, then you can put max load of 720w subwoofer (12V × 60A = 720w). But i would not push the amp to its limits.. clipping/distortion issues

@@retromadness7777 oh.. so the two 30A fuses is like one 60A fuse?

@@WSsaintpeter Yes

This amp can output 1200w at 1 ohm load and single 150 - 200A Fuse might be enough for dual TSW312D4 subs. And no, it will not damage your battery..

4 OHM, 200w RMS each

Connect 3.5mm audio jack to any phone to RCA(amplifier). Use splitter to connect more speakers

Yes, the amplifier can easily handle dual 500w RMS subs if connected load is 1 ohm

Both are 8 inch subs

Yes, they sound really good in-person. Will definitely checkout the channel you recommended. Thanks!

@@retromadness7777 my pleasure bro and keep up the good work!

All MBE does is build the Box slightly larger than spec, and gives it enough port area . there's really nothing special, or secret to what he's doing. Plus his finish looks like a toddler smeared it on with his mom's featherduster

@@theejoeylee no one said it was special or secret but well built and loud. Where's your superior boxes at junk man?

MBE🔥

Info in description

Bass i love you

I watched other RU-vid videos and got inspired to build one.. You need all the hardware like wood cutter, MDF wood and all other speaker components sub woofer, amp etc then you can start.

Pioneer D8701.. but D9701 newer model is preferred (better components)

@@retromadness7777 thks bro for reply….. You think Sony XM-GS100 is a bad option? But spec configurations are same as compared to Pioneer D8701.+less cost . Also I think Sony Amps Subsonic filter is essential for sub protection. Which pioneer one does not have. What did you think?

@@scabnicx-dj4vj I suggested Pioneer based on output wattage.. Pioneer does 1200w at 1 ohm, Sony is less powerful. Other features in Sony is a plus point, totally depends on your Subwoofer Load. Also I am a big fan of Pioneer since 90's.

@@retromadness7777okay pioneer💯😂

LMFAO! Really? That's the song you think is the best Bass song of all time, huh? WOW.... alrighty then.

@@marcuslinton310 no that song has alot of bass

12v 60A

@@retromadness7777 I used to run a 300w pioneer with 2 15s on a 30amp supply lol I was a kid back then 🤣 25 years ago, it wasn't enuff obviously, can you tell me what brand 😉

@@retromadness7777 how loud can you get ? Is the bass clean when you turn up volume?

It works between 11v - 16v input.

@@retromadness7777 Thank you very much and you are very kind. Let me ask you one more question. i want to use this amp for 1600w 500 rms pioneer tsw312d4. but there are 3 40 fuses on the amp. I have to use amp fuse between power cable and battery. Is 80 amp enough?

I will only connect one Subwoofer.

@@emreklc1030 yes, 80A fuse is fine but if you are using your car amp for home setup, then you don't really need a fuse.

@@retromadness7777 no i will only apply it to my Skoda Octavia. I bothered you too much because I don't have enough information. thank you very much you are very good🙏♥️

In description

Maybe.. Build one for the truck and see yourself.

@@retromadness7777 lh

You can build this under 30,000 Rupees

They flex pretty well.. Also, they can handle decent rated power, I just don't push them to their limits.

Decided to get me 2 same subwoofers/woofers SW-802 for 200$ for my diy bluetooth speaker from your video. They power hungry and eats 100W like nothing but better quality than I expected and sounds really deep and linear but I still not tested them in a proper box and with more power they should be really impressive. I have Hertz es200.5 200W but these soundhits subwoofers seems better in sound quality. I'm quite impressed with Chinese drivers. @@retromadness7777

Yup. I know.. But the subs are very low wattage.. And I rarely run them above 50%, which is around 200w from both subs..

that short of a run should be ok. if its not getting to hot your fine. its really only when you get into 15-20ft runs that larger wire is needed. your run looks like 2.5ft to the power supply.

You could be correct. Would have to factor in the resistance per ft / meter of wire.

In the description

Thanks , what was the price?

@@bassworld5279 Around 45 USD each

My amp allows only low frequency notes to subs.. For Mids and Highs I use other speakers

@@retromadness7777 ight i got an amp also hooked up at home

First one is Woofer cooker, I've blown a few subs with that one Third is bass I love you Don't know the name of the second or fourth songs

I randomly played from RU-vid when I made this video.. let me see if I can find again

Around 40k INR

Around 40K INR

Ya, the windows were rattling a bit

Total around 40K INR.. the amp OP for those subs

@@retromadness7777 u from

@@retromadness7777 indian price ???

@@giz913 40K INR

It is bass test Man

You expect the man to test vocals and midrange on dual 8" subs? #howsway?