Тёмный

DUCATI 748 Fuel system service 

P.X.C BIKES
Подписаться 4,6 тыс.
Просмотров 1,6 тыс.
50% 1

Ducati 748, 916, 996 fuel system service along with fuel lines replaced air filters cleaned.. spark plugs replaced, which can be performed on the Ducati 916 and the Ducati 996

Авто/Мото

Опубликовано:

 

1 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 15   
@docsbmw525i
@docsbmw525i 2 месяца назад
Absolute quality work again 👍👍👍👍
@PXCBIKES
@PXCBIKES 2 месяца назад
Thank you very much pal 👍
@DavidMartinez-kf9zt
@DavidMartinez-kf9zt Месяц назад
my side stand has a cable that goes between the 3 wire plug and the 2 wire plug. I thought it was weird but when I removed it the bike would cut off with the stand up. So I put it back and figured I was just wrong. 2002 620ie
@PXCBIKES
@PXCBIKES Месяц назад
Really 🤔 I have never seen that ....it must be an adapter cable for the harness ..so one of those wires will be bridged into one
@richieperrott8413
@richieperrott8413 3 месяца назад
Interesting vid mate . Sounds sweet now!
@PXCBIKES
@PXCBIKES 3 месяца назад
Thank you pal 👍
@ducatidave
@ducatidave 3 месяца назад
Another great video and another job for me to do 😁👍
@PXCBIKES
@PXCBIKES 3 месяца назад
Thank you ...your bike is just going up in value now 🫡
@PXCBIKES
@PXCBIKES 3 месяца назад
I used 7.5mm hoses to replace the old ones, but 8mm is fine and easier to fit
@ducatidave
@ducatidave 3 месяца назад
@@PXCBIKES great I’ll try get some during the week
@TSauce1
@TSauce1 Месяц назад
Can you elabroate on the path the fuel takes and the purpose of the degaser and fuel return lines? It's unclear to me. If you did have to replace the smaller hoses (5mm and 7mm) in the assembly, where would you source them? Thanks.
@topfentorte
@topfentorte 3 месяца назад
Thanx for your videos! @28:02 you mention making sure that the idle sattles back stable and does not dip. Since my 98' 748S does exactly that - dipping, not sattling stable immediately - any short advice on how to solve that?
@PXCBIKES
@PXCBIKES 3 месяца назад
Yes it's just slightly rich so you can adjust the fuel screws on the throttle body's...turn them in but only quarter turn at a time ...it maybe just one to adjust
@996ducatirides
@996ducatirides 3 дня назад
Fuel tank level sensor should have been replaced, too. The o-ring and rubber hood perish.
@PXCBIKES
@PXCBIKES 3 дня назад
It dosent have to be replaced its the plastic nut that can crack...the metal nuts are better... but I don't have metal nuts ! 🤔
Далее
DUCATI MOTORCYCLE BRAKE AND CLUTCH FLUID CHANGE
38:59
Просмотров 1,1 тыс.
DUCATI 748 CLUTCH REBUILD
30:46
Просмотров 1,6 тыс.
DUCATI 916 ELECTRICS REPAIR FIX
34:49
Просмотров 2,4 тыс.
DUCATI DRY CLUTCH DRAG PROBLEMS
17:41
Просмотров 834
Fixing Ducati Fuel Sensor- Step by Step Guide
15:02
Просмотров 3,3 тыс.
DUCATI 959 PANIGALE CRANKS BUT WONT START
35:29
Просмотров 1 тыс.
k20 / k24 swap fuel system DIY!!!
9:19
Просмотров 16 тыс.
DUCATI DESMOQUATTRO OIL CHANGE AND FILTER
20:02
Will it Start after 17 Years? Ducati 916 SPS
35:58
Просмотров 249 тыс.