DUDE! WHERE'S MY SILL AND QUARTER PANEL? 

This car should be on the road not a dirt feel. Looking at what you have done to her in such a short time is amazing. Would love to see her painted with all her trim and a little attitude in the front. Jim is a lucky man to have friends like you two. Great job!

His videos make me want to just get an old car or truck and start redoing all the metal work on it.

That went smooth, Chad. Like the old adage goes..... You go to school on the first side and you're an expert on the other side.

Oh man...if Jim isn't seeing this he sure is going to be thrilled when he does...I'll be surprised if he doesn't want to take it further...really looks nice...great job Chad and great job jolene on getting us right there in the action..great episode 👍

This is the part I wanted to see! The passenger side rocker panel is virtually gone from rust! Watching Bad Chad conquer this side is a must see & I will truly learn a LOT from it!

I cant believe the pro results you get in such short time!

Jim is going to be very happy with his car. What an excellent job!

Lovely to see the enjoyment on your faces when the dash turned up… it’s truly a work of art…. Jim will be equally pleased with the work you done for him on the old’s… helping each other out is what we all should be doing 😎

I can appreciate the work that you are putting in to the bucket of rust and you’re doing a great job but for something he’s going to run in a field

A prime example of how, if your mind is in learning mode - the second time you do something you have improved on the first time. Love the way you always challenge yourself to do better each time brother

CHAD YOU ARE MAKING THE VIEWERS AND JIM VERY HAPPY with this make over,,,,,,,,

Chad uses the cut off wheel like its an extension of his hand. Laser straight lines without slip ups. What an artist. Thank your for your production Jolene.

Every night I am learning, soaking up chads knowledge!!! Thank you for teaching 👍👍👍

The Dash and frames are terrific works of art. Geoff Webster is truly great at his craft. Jolene's Bugatti is going to be something very special indeed.

Love the Back window in this Oldsmobile,

The speed of this repair is amazing. Go Chad Go!

Can't wait to see Jim driving around in his new field car 🙂

Back at her again this side gets a new sill and rocker ... Chad your doing a great job but your going to make it look so good Jim won't want to field drive it ....

Great job on Jim’s sills. Sound cut out again part way through video. Great to watch …. Even without sound. Chad has a voice that picks up pretty well under any circumstances.

Chad you keep going, you end up doing the hole car, haha you did a nice job. Jim is going to love it. you a good friend.

awesome job...u 2 r a great team!... thanks 4 video. be kind.

I just can’t believe what you have been able to with that car so quickly it’s so far gone from rust, unbelievable! Impressive!!!

Amazing that Jim brings you a car to fix floor boards to hold a seat but your professionalism and craftsmanship you’ve taken it so much further. It’ll be interesting to see what Jim does with this car.

Patience and knowledge. Great work, Chad! Ole Jim will be proud of your work...

You make quick look easy. We enjoy the daily lessons as we see your projects go from Zero to Hero. We get the same satisfaction in our own projects and we love watching people who express the same passion as we do about old things. Cheers from Rustoration Inc. in Washington State. See you guys tomorrow.

Jim will likely be quite speechless with this, he seemed pretty overwhelmed last time he was in, I would imagine he has spent his life doing things on his own with little help from others (because he is OCD) so cool you stepped up to help a friend Chad

Great job on Jim’s car guys, just goes to show how something that looked far gone is coming back to life.

I hope Jim has a great time in his yard car, I think he will decide it can be a road car and drive it and have fun. It's not a show car , It's a go car! Great job, Chad and Jolene, what a great thing to do for a friend!

Jim will really appreciate the work Chad and Joline have put into his vehicle.

That went pretty smoothly today. Looking really good

I hope Jim gets to work on this car as soon as he gets it back! No pressure though, Jim, I'm just excited for ya!! ​🤘😎🔥

Bad Chad,Thanks for showing your skills and talents. Jolene, Thanks for the camera and video skills.

I love the way Chad and Jolene work together, he is quite an artist when it comes to using his head to make something from nothing. I work with a lot of body man The head shops. They couldn’t do a 10th of what he was doing

I like that your showing us a different way of doing the sill and quarter ... It gives us two prospectives of the same process. God bless Chad and Jolene.

Adding so much medal to that car you should continue and finish the whole thing off. Great job.

That dash and window surrounds are beautiful! What a nice surprise for Jolene, I bet she's happy as a pig in sh*t ! :)

Light at the end of the tunnel . Time management is key because if you don't set some deadlines the project could set for along time . Great job Chad and Jolene .

Chad you are a good man! Jolene is sweeter than a bucket of honey! And smart as a whip too! I enjoy the time we have together every day… Thank you for helping all of us through these troubled times!

Car is almost ready for the road. Loving it!

Hopefully next summer my wife and I will be heading to your neighborhood to the lobster house y’all went to and hopefully get to stop by for a visit from Mississippi.

Fina didn’t look too impressed today. Gotta love dogs and the expressions they give us. Oh by the way , car is looking great, nice camera work Jolene.👍🇨🇦

Once you figure out exactly what you need to do on one side, now you can do a shortcut on the other side. Outstanding.

Hard to stop the rust repair when your having so much fun

The old girls just about done, she’s going to be solid, great job can’t wait to see the next floor being put in ,have a good evening ,God bless.

Unbelievable how you make this look so easy and give the step by step fabrication. I'm sure there are people using your tips and techniques. Keep up the good work guys, Jim's going to love this car and hopefully after he's done having fun in the field with it he'll make it his next project and get that bad boy on the road.....

Time is flying. Jim will be back in his car in no time. Nice work, both of you!

Looks good! Jim is going to be beside himself, nice thing you guys are doing for him. Well deserved, he's a great guy.

Happy Thursday ...Hanging out in the Fabit Hobby Shop. Shopped at Eastwood today. Chad does 18g and I start at 16g. It's hard to find tooling on 16g without going up in sizes of equipment...Awaiting for the Chad n Jolene Show

Would love to see more metal work, love seeing these old cars saved, it is like saving history, thanks.

Love the fact you did the rocker and rear quarter at same time. Who knew. Great job

Chad you made that car look good again it has a great chance to get put back on the road again, Chad you are a great fabricator and I love watching you guys together putting all these older cars back together and road worthy, thank you for sharing your skills with us and God Bless you guys

Another day in the shop doing what you love, What a life you have my friend! Cheers you two.

Building it back better than GM originally did! Awesome job! Keep those videos coming! Your a great teacher sir!

Love the look Fini gives Jolene when Brads altering the sill height. It’s like “are you filming me!!” 😊 Thanks again guys. Love your work.

That's quality metal work here people. Did you see Fina listening & watching intently at the start of the show? If Ed Sullivan was introducing Chad & Jolene he would still say We have a really big show tonight. Bo Dereck may have invented the 10 but Jolene continues the tradition for Chad. Hope my hat arrives soon so I can wear it . Thanks again for the win.😎👍🇨🇦

I'm looking forward to seeing how you repair that mess .great information chad and jolene God bless you 👉⚘⚘❤❤

lookin fwd to this episode and enjoy Chad's energy and Jolene's smooth moves with the cam and the good vibes between them.

Hey Chad...Just started watching your RU-vid video clips and they are quite informative. It's obvious that you are a very hard worker and that you really enjoy your work! It's equally nice to see that you always treat Jolene with politeness and respect....your a gentleman! Keep truck'n brother....well done!

Love watching the master at work!! Cheers Chad and Jolene !!

Having fun & getting it done! Thanks for sharing Chad and Jolene!

Great job , Jim's gonna love it. Probably change his mind and have you do more. Rock on you two !

I just love this old Olds! Such a cool 50’s style, colors and the chrome!

Jims gonna be shocked how it looks and how far you have come with the car great job Chad and Jolene true craftsmanship and art

Jolene, you do a fantastic job on the camera! And Jim’s car is looking good! 👍

well been waiting all day now for yet another awesome and intereting show on replacing rusted parts on jims olds..thank you chad and jolene..your the team

Nice episode last night and holy molly what a beautiful job on the woodwork that’s going to look beautiful in jolene carrr, Going to be one of the best cars on the planet when finished keep up the great work and thank you both for sharing part of your busy day.

Great work! I will be implementing all your tips and tricks on the 55 Chevy we are building. Thanks for takin the time to video this.

We're on vacation but we still make sure we watch Chad & Jolene! - Bobby & Sue

Looks great. Thanks for the amazing tips. I’m looking at buying my first welder. 👌

Great progress. I'm a visual learner, this stuff is always helpful.

Thanks again for sharing how you work and inspiring people to try and not be afraid to tackle what might be a difficult job. Joe

Work of art! Awesome metal fab without a bunch of complication.

Man I look forward to every one of these videos! They are so inspiring. Thank you.

Good job; I enjoy seeing how other people do things. Keep doing what you’re your doing. God Bless!!!

Super fast and a great job. Jim’s going to be so happy and thankful. Great video thanks from Ontario

It just keeps going! Great job. Those panels look great!

I think I missed my calling. Love watching. I always wanted to do this kind of work.

Awesome work! Keep up the great daily content. Thank y'all!

Chad you should really think about starting a welding/ fabrication workshop where you get together a small number of people and teach them the art of welding & fabrication. You explain things in a raw easy to understand way so it doesn’t sound and look too complicated.

Thank you Chad & jolene for jobs done well.

Great job on the sills it amazing how they look great plus add value & strength to Jim's car, great work Chad and Jolene

After seeing the wood work for Jolenes Bugatti I'm having it rough just thinking about t getting it done lol . But Jim's car comes first and I can wait ! Because I'd want to watch it for a long time ! Very entertaining 👏 ! Thumbs-up 👍 Chad and Jolene !

We are in for a good one today. Brad will show us his magic. The job will be done and very well, I might say!

Even though you have years of experience and learning you still take each thing you do and take something away to make things faster, easier, stronger, better in some way. Making the passenger side sill and quarter panel in one piece really cut time and looks as good if not better than the driver side. Life long learning is the real spice of life.

Awesome job Chad as always. I really enjoy watching as you fabricate and make things work. I find myself waiting every night for your show to come on and wonder what will I learn next.

Chad you do excellent work. Its a treat to see a skilled tradesmen working away and saving an old car. You get a lot done with just a guy by himself. Its great that Jolene can step in and help on top of everything she already does. To bad there weren't a few more Chads around to give a guy a hand.

Looking good! Powering on through it, like a hot knife in warm butter, you make it look so easy. Can’t wait to see what’s next to be repaired/fixed/reworked/etc. Anyway, great job for the both you.

It's going to be a great video. it makes my day to see a new video from Chad and Jolene.

You made it look so simple, it looks a good solid floor. Love watching you work, Be safe

Thanks for all the awesome tips and tricks... love your show

Great video series ...thanks Chad and Jolene

Amazing video as usual, I'm loving the way Geoff used the offcuts and made something usable on the previous video. I can't wait to see a bit more progress on jolenes car

Looking great, Jim will be delighted.

Great job , Jolene & Chad, amazing progress.. Smokin !

Looks Awesome!!! Jim is going to be soooo Happy!!!

The finish is in sight and what a lovely job. Jim is going to be over the moon. And another nice project in the pipeline. Carry on !!!👍👊

It's amazing how you can take a piece of junk and make something so nice. I really like to watch your performance. I learn much watching you and like how you explain what you are doing. continue the good video instructions. Jay, from Norman, Oklahoma, USA

Hi Chad love the way you make it all work . Ignore all the negative comments you help your friends out.. should be more people with your attitude..I have helped many people out and when I need help they all disappear . Your a good friend to have ..Wish my friends had your attitude... Thanks for the videos I have learned a lot...Who needs friends ..Will finish my build on my own ..Have 1 friend who's gonna paint my car can't wait to see her in colour..Have a good weekend... thank Jolene for awesome camera work..

getting along in the build...thanks for letting us join you

You are a magician who’s willing to let us peek behind the curtain!