Тёмный

Dustless Blasting Strips a '63 Impala in Under 1 Hour! 

Dustless Blasting
Подписаться 63 тыс.
Просмотров 5 млн
50% 1

See our Limited Edition DB500 Mobile S: www.dustlessbl...
Machine Used (DB500 Mobile) store.dustless...
We've been reading your comments and thought we'd answer some of the more common ones here:
Q: What happened to all that glass and paint?
A: With Dustless Blasting, the spent media and paint don't go very far. Water encapsulates the particles being removed, and they drop to the ground. When you blast over a hard surface, like this one, you can scoop or sweep up the spent media. Others choose to blast over a plastic tarp, which catches the media and can be rolled up and thrown away.
Q: Doesn't water cause the metal to rust?
A: By using a specially formulated Rust Inhibitor, you can prevent flash rust for up to 72 hours. Add the inhibitor to the blast water to prevent flash rust during blasting, and then use it as a rinse after blasting is complete. This will give you or the customer plenty of time to prime the vehicle.
Q: I once tried Sandblasting a car and the dust was awful. How is Dustless Blasting better?
A: The water in the process suppresses the dust plume and allows you to use far less media than traditional dry blasting. If you've ever sandblasted before, you'll know how dirty everything can get, Dustless Blasting helps solve this problem.
Q: Is it expensive to buy Dustless Blasting equipment?
A: Our turn-key mobile equipment is no more than the price of a nice pickup truck. And unlike a pickup truck, the Dustless Blasting system gives you the ability to earn, on average, $300/hour. And because it's not a franchise, you'll never have to pay ongoing fees or royalties - you truly own your business.
Imagine how much money you could make with this level of productivity. It's no surprise that new Dustless Blaster owners are calling it "magic". The Dustless Blaster is faster, easier, and cleaner than any other blaster on the market. We've been designing and manufacturing top quality blasters since 1941, and continuous improvement has brought us to Dustless Blasting. The most incredible advancement in blasting technology in over 60 years. Find out why the Dustless Blaster is the best abrasive blaster.
First song is by Dan-O at DanoSongs.com
Second song is by Jason Shaw from Audionautix.com
If you'd like know more, visit us below or join us on social media:
Start A Business (Own a mobile blasting business and make money in your community): www.dustlessbl...
Online Store (Purchase consumables, parts, and accessories):
store.dustless...
Academy (Training videos, support, and resources):
support.dustle...
Facebook: / dustlessblaster
Instagram: / dustless_blasting
Twitter: / dustlessblaster
Linkedin: / dustless-blasting
#Sandblasting #Wetblasting #DustlessBlasting

Авто/Мото

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 574   
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 5 лет назад
We left a Q/A in the description for some of your more commonly asked questions! Hopefully it helps!
@RichardMLowe
@RichardMLowe 4 года назад
Just got off the phone with Jeremy and I hope that this will go forward
@777Slots
@777Slots 4 года назад
Hi please send me more info via email, jerrod@pdrsolutions.ca
@karlhungus5554
@karlhungus5554 6 лет назад
Awesome! This would be great technology to help my Mother-in-Law remove her makeup.
@guardrail2897
@guardrail2897 5 лет назад
How about just remove the mother-in-law.
@afrosamuri05
@afrosamuri05 5 лет назад
It will definitely remove your mother-in-law from the make up lol.
@ceaserbriones5337
@ceaserbriones5337 5 лет назад
Dose it work on fiberglass boats?.
@tomperkins5657
@tomperkins5657 5 лет назад
@@guardrail2897 Now, now, Guardrail, let's not put ideas into Karl's head.
@vanzrealm
@vanzrealm 5 лет назад
😂😂🤣🤣🤣🤣🤣
@tantricmaster800
@tantricmaster800 6 лет назад
It is not ready for primer, it is ready for a lot of body work.
@Mr.-Wint
@Mr.-Wint 4 года назад
A lot..
@fibrenewtidewater1863
@fibrenewtidewater1863 6 лет назад
I have to ask, as a small business owner, what kind of liabilities there might be? If the media is recycled bottle glass, and paint is being removed, how is that all cleaned up at the end of the job? Can a child with bare feet run across that driveway? I'm not too familiar with that type of blasting media, but I know what having fiberglass insulation come into contact with skin feels like. Are the micro-chips of paint left to wash down the nearest storm drain? Again, I'm not trying to be critical, but if you stop to think that a bunch of contractors building a home are required to erect those fabric dust barriers - for digging dirt, what must the requirements for blasting paint with glass media be? I would imagine that at least a portable shelter with a capacity for containment would be required by most municipalities. I have 2 old cars, and this system looks awesome, compared to the time it takes to do only a small bit of sanding. I think that as a homeowner, if someone didn't mind having the residue melt in with their backyard, they might get away with it, behind a privacy fence. But I would really be careful offering this as a customer based service, without the capacity for containment and disposal.
@dot7107
@dot7107 7 лет назад
Ready for primer? I would say that this impala needs some welding before primer...
@dangerdavefreestyle
@dangerdavefreestyle 6 лет назад
Hammering, shaving, metal shaping/ patching, replacement paneling,
@jonjon7245
@jonjon7245 6 лет назад
restoration shops in high humid areas epoxy prime the entire car imediately after blasting to prevent future surface rust, then metal work, bodywork and polyester primer.
@claudio_calcagno
@claudio_calcagno 5 лет назад
there are weldable primers that allow to be applied before all the welding and grinding cutting operations, they do not burn, they do not stink and they do not prevent the welding
@NOVE1967
@NOVE1967 5 лет назад
😂
@wolf360090
@wolf360090 5 лет назад
epoxy priem it so metal does not rust, then grind off areas where welding is going to be done
@chrisworth2102
@chrisworth2102 5 лет назад
Brings back memories, I sandblasted a horse trailer year ago and it basically disintegrated into just a frame. Great system, keeps the thin metal cool too I bet to avoid warping.
@NZHorizones
@NZHorizones 11 лет назад
For those that have never stripped a car before in there own driveway this was a symphony for the eye, I could of sat here for the whole hour and watched those coatings wash away. I certainly want this machine.
@raykarner686
@raykarner686 4 года назад
So glaas, paint and bondo leave no mess behind?
@realdeathpony
@realdeathpony 5 лет назад
The customer should of pulled the dang bumpers and grill /tail panel off..
@terrykuder8268
@terrykuder8268 4 года назад
It's only half done. What about inside trunk, engine compartment, and door frames?
@whatever895
@whatever895 4 года назад
Whenever they say call for price, you know their out to lunch on their price
@pattygq
@pattygq 6 лет назад
0:25 That's a hell of a handshake lol.......and again at 4:46
@foreignwhipcrasher7388
@foreignwhipcrasher7388 6 лет назад
pattyg lmaooo almost broke his arm and shit 😭😭
@Denbig.
@Denbig. 6 лет назад
I like a man that can give me a firm grip.
@adrianramos4387
@adrianramos4387 5 лет назад
Rubber arm 😂😂😂🤣🤣🤣😪😶🤢🤮🤮😱🤪😳😂😂😂....
@sludge4125
@sludge4125 5 лет назад
They knew the camera was rolling.
@pastoryoda2789
@pastoryoda2789 4 года назад
pattygq i think something is wrong with his arm
@TralfazConstruction
@TralfazConstruction 4 года назад
In 1989 I dropped off my wife's car which was being repainted by the dealer under factory authorization for failure of the clearcoat and underlying paint. A little more than an hour after Ieft the dealer I had to go back to get the garage door opener from the sun visor. The two-man crew working on the car had it 80% to the bare metal where they were located in the corner of the body shop and after seeing this video I believe that they using a process similar to what's shown in this video. My wife, notorious for keeping her vehicles for a long time, admired the paint on her '88 Bonneville SE for the next ten years or so and the finish on that car was an outstanding feature since the dealer did an impeccable job on the repaint.
@jeffbaker4364
@jeffbaker4364 10 лет назад
Small sweeps is how its done,the compressor probably a screw type works like a surecharger. around 200 ks an hour at the tip of nozzzle.
@willfink1995
@willfink1995 4 года назад
Ha that’s crazy I just realized y’all are in Hammond when I googled this. I’m a painter over at Bill Hood on North Morrison! This product looks incredible. Might be calling y’all someday.
@markallen9389
@markallen9389 6 лет назад
The video might say dustless but believe me it’s not! I had my 2015 F150 bed done using this method and I didn’t pay $1000.00. Look at the ground in the video that’s the mess that’s left. This method does a great job and I’m happy with the way my truck turned out but there definitely a mess afterwards!
@dontyoudare7767
@dontyoudare7767 8 лет назад
Not bad! I think this method of "dustless blasting" would be really good to strip back previously painted flaking and peeling "brick walls" to its bare substrate.
@lukewarmwater6412
@lukewarmwater6412 6 лет назад
I just finished helping on a log house job. the medium glass media does a nice job and this rig works well I liked it a lot. only get about 250 hours out of the short coupler hose on the blast tank that I don't know the real name for, but the machine came with three spare ones so that must be normal.
@jonathanwwichtendahl6930
@jonathanwwichtendahl6930 5 лет назад
That and stucco
@rcnelson
@rcnelson 6 лет назад
Looks good. I once helped blast paint off a car using some kind of plastic medium. What a pain.
@delljohnson172
@delljohnson172 4 года назад
Any health hazards from breathing and handling the powdered glass? how do you collect and dispose of it.?
@TranscendentalAirwaves
@TranscendentalAirwaves 4 года назад
What about the windows? Some of the spray has to be hitting it at some points here...
@TeReNo223
@TeReNo223 9 лет назад
Every OCD persons dreams watching this hhahaha. its so clean !!
@keefykicks6102
@keefykicks6102 6 лет назад
TeReNo223 so satisfying 👌🏼
@jjash5848
@jjash5848 10 лет назад
Kick butt setup for sure, but does the local demand make the investment worth while? I suppose this could be used on concrete or any rusty structure…so yeah, maybe I just answered my own question.
@Flussig1
@Flussig1 4 года назад
Very interesting, here in So. Cal the A.Q.M.D. would require you to capture everything you blasted away.
@leef8063
@leef8063 6 лет назад
What about warping of the large flat panels? Do you guarantee not to do damage to the existing metal?
@l.wheels3458
@l.wheels3458 6 лет назад
2:45 my phone battery in a nutshell.
@PINCHENERON
@PINCHENERON 11 лет назад
That was simply amazing..! I'm curious if this system will work on aviation ? of course the surface is different from a regular car ( car is metal ) aviation ( combination of aluminum, fiberglass and carbon fiber)... Have you ever tested your system on aviation components ?... If you do I might have a idea what aviation company will be interested in this kind of tooling.
@robertbragg9364
@robertbragg9364 6 лет назад
Definitely looks a whole lot easier then sand blasting and a whole lot cleaner.
@rammice
@rammice 6 лет назад
that was so satisfying to watch
@hsbs0855
@hsbs0855 6 лет назад
Can't wait for my trailer setup to arrive!
@SS4LiFe1488
@SS4LiFe1488 8 лет назад
wow, this is amazing, i could easily have a new paintjob every year without much pain in the ass!
@JohnDoe-du6yi
@JohnDoe-du6yi 4 года назад
What about all the trim and glass? Is that all etched and pitted now?
@wellmixed7269
@wellmixed7269 6 лет назад
I'm here because I have OCD but this is so satisfying 😍😍
@rsvp1234
@rsvp1234 5 лет назад
That annoys me when businesses are booked for months out. Buy more equipment and hire more people. You're inviting competition to move in. Having months of work does not mean you are successful it means you cant handle demand and you aren't satisfying clients. Who wants to wait six months to get their job done?
@juanchoman9824
@juanchoman9824 5 лет назад
What city are you in?
@joedennehy386
@joedennehy386 3 года назад
Absolutely brilliant thanks I struggle to understand over 1 000 thimbs down
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 3 года назад
Thanks for the support!
@akrause2004
@akrause2004 6 лет назад
I have a DB500 . The tool is amazing and performs exactly as shown in the vid. It's a highly effective tool that is worth the money and can earn a company like mine a very nice profit. However, ....the term "Dustless" is *extremely* misleading. Any area you work is is going to be a mess. A MESS! At a minimum, there will be a substantial amount of glass bead (basically sand) all around the work area to recover. If you're lucky enough to be outdoors, many times you can just blow the area with a leaf blower once it's dry (like 20 min) and be done. This week, my guys are blasting miles of rusted water/sprinkler pipe inside a parking garage so we'll have to blow, sweep, shovel and vacuum up the media when we're finished before we wash the floor for line striping. Otherwise, we'd clog the floor drain in seconds. Likewise, whatever you blast will be dirty and have residual glass bead on it as well. You HAVE to do a thorough rinse of the surface afterward and add extra Hold Tight (or whatever rust arrestor you purchase)to most surfaces or they will flash rust very quickly, ...sometimes within an hour or two. We double the recommended amount of HT in the 500 and still rinse with it afterward. I'd rather burn up a little extra $ on chemicals rather than have to pretty much start over on a rusted surface again. Ultimately, you can make nice money with this thing but there is a learning curve and, like anything, you have to sell, sell, sell the service or it will sit and collect dust (pun intended). Few people know what hydroblasting is.
@newzerozeroone
@newzerozeroone 5 лет назад
So many questions, but here's a few... 1) how is the glass media reclaimed? 2) if there is water/glass media in the air why is he not wearing breathing protection? 3) how many gallons of water did this thing go through?
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 5 лет назад
1.) 40/70 crushed glass media is generally not reclaimed as it shatters on impact and becomes unusable. It is swept/scooped up and disposed of. Luckily, it is inexpensive at about $10/bag (or less depending on your distributor). Some more expensive kinds of media like glass bead can be reclaimed, depending on the use. For example, if you are cleaning pool tiles with glass bead you may be able to use a pool vacuum to reclaim the majority of it. 2.) The water in the Dustless Blasting process suppresses the dust plume making it safe to breathe normally when blasting in open air. We do recommend hand, ear, and eye protection. For comfort, many of our contractors like to use the Nova 3 blast respirator. We highly recommend it. store.dustlessblasting.com/collections/comfort-systems/products/rpb-nova-3-blasting-helmet 3.) The DB500 uses about 20 gallons of water per hour. Hope that helps!
@pengkrug5283
@pengkrug5283 5 лет назад
thats funny how you said it "small cost compared to our profit" lol
@chrislawson7983
@chrislawson7983 5 лет назад
Very nice 👍 thanks for the post.
@tacocat1938
@tacocat1938 6 лет назад
I have OCD this satisfies me so much
@ryangraham6341
@ryangraham6341 5 лет назад
yeh what about inside the door jams and under the bonnet looks ok though it dosnt seem to warp the pannels like most bead blasting
@danilot28
@danilot28 8 лет назад
it's more funny to do to the new neighbour jeep
@MrDavidelliottjr
@MrDavidelliottjr 5 лет назад
Yeah. That would be epic
@Miguel-wc8hu
@Miguel-wc8hu 4 года назад
Excelente trabajo, dónde puedo conseguir el equipo... comprarlo
@rikiwakwak
@rikiwakwak 5 лет назад
Hmmm,,, what about the silica in the recycled bottle glass?
@datchaffeec4529
@datchaffeec4529 5 лет назад
4:45 might be his first time doing a hand shake
@drefhill
@drefhill 4 года назад
second time at least 0:25
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 4 года назад
LOL!
@tanihcstuag3109
@tanihcstuag3109 4 года назад
And in only 54 minutes the owner realised that the car is complete trash
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 3 года назад
It was savable....somewhat
@64oilburner
@64oilburner 6 лет назад
That’s a reasonable price for that we had a guy come to our shop and do a pickup box he quoted 6-700 and it ended up costing 1400 took him almost a full day
@Aikaramba12
@Aikaramba12 4 года назад
Wont it start to rust right away?
@stevenelliott318
@stevenelliott318 4 года назад
What's the 102 liquid you rinse the car off with after the blasting process and why rinse with water and that 102 liquid?
@tonylang7526
@tonylang7526 5 лет назад
WOW!!! ITS ABOUT TIME FOR THIS SIMPLE TECH!!! RENTING THE POWER UNIT AND $50 BAGS OF GLASS RESTORES AGING METALS ALL AROUND THE HOUSE, FARM, AND BUSINESS!!!
@n8rm
@n8rm 5 лет назад
I sand blast ceramic shell off of bronze at a Foundry I work at. We use aluminum oxide sand through a Clemco blasting unit in a room where you wear a hood with circulated fresh to breath. This method is very interesting
@towerydanny5
@towerydanny5 6 лет назад
Hope there was rust inhibitor added in so when u was done blasting it dont rust
@claudio_calcagno
@claudio_calcagno 5 лет назад
What air is needed to make it go? how much does a suitable compressor cost? how much does it consume? How much does a treatment plant and disposal cost for water contaminated by paint removed ? throw it in the toilet a bucket after another or in the rainwater drain?
@flugschulerfluglehrer
@flugschulerfluglehrer 8 лет назад
Great technology! I would love to see how this works on wood.
@chrisflores8362
@chrisflores8362 9 лет назад
Dustless Blasting Sponsoring a Nascar team this week in Bristol TN!!
@jarodmorris611
@jarodmorris611 7 лет назад
Is it completely bare metal with decals stuck on? that'd be perfect.
@OceanicGyogō
@OceanicGyogō 4 года назад
This is satisfying to watch
@yafois988
@yafois988 5 лет назад
Actually for a DIY guy home restore, this is a great thing.
@ThePrincesselise06
@ThePrincesselise06 5 лет назад
Awesome
@TimothyMichaels
@TimothyMichaels 6 лет назад
I'm sold. 😁😲
@MrSmokestac
@MrSmokestac 11 лет назад
What is the price for a machinery like this? Amazing! Very interested if the price is right! Best Reguards, Adam SWEDEN
@TheAviationJake2930
@TheAviationJake2930 10 лет назад
Very nice innovative machine! Kudos to you!
@GnarlyFarleyy
@GnarlyFarleyy 9 лет назад
I would love to have this done to my 1983 Chevy C10 pickup before I do the body work on it and of course then paint it
@zoesdada8923
@zoesdada8923 6 лет назад
How much does it cost?
@maxigo4537
@maxigo4537 5 лет назад
Hi sir, may I know how much will it cost me ? And what is the cost for shipping this to Singapore ?
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 5 лет назад
Hi Maxigo, I'm going to reference you to our international page. At the bottom is a phone number, give us a call so we can get you shipping information www.dustlessblasting.com.au
@mechanicsnorthperth
@mechanicsnorthperth 11 лет назад
Wow! Thanks you so much for the tips. It's really a big help. Good job!
@josephcarroll7027
@josephcarroll7027 7 лет назад
what a great machine!!! very impressed!!
@tajinelson7815
@tajinelson7815 5 лет назад
Man you have a number i like what i see im restoring my old scoo
@tangotango168
@tangotango168 6 лет назад
Great job
@delboytrotter8806
@delboytrotter8806 6 лет назад
What a promo !
@SteelWaffle112
@SteelWaffle112 6 лет назад
I have a 1,100hp compressor with a crock that holds 400 pounds of sand could I just use that setup for wet blasting I'm curious to how it works what do you guys add into it you said something about glass
@nainitalism
@nainitalism 2 года назад
If you hold the nozzle perpendicular to the surface you will get better production and use less media.
@mohamedibrahimmohddaud1139
@mohamedibrahimmohddaud1139 6 лет назад
We tape the chrome... Leave the front and rear bumper...hahaha...anyway thats damn satisfying
@buddy77587
@buddy77587 6 лет назад
Amazing
@zeppelin67637
@zeppelin67637 9 лет назад
nice, since warping is usually caused by heat, I would guess there would be no warping here, since the water would keep it cooler.
@cudatom9290
@cudatom9290 5 лет назад
What about protecting the glass?
@Calling321
@Calling321 9 лет назад
Very quick and nice. Taking all that off by hand would take hours/days.
@aronoah
@aronoah 9 лет назад
Collin Bru weeks man
@brandonsmall4277
@brandonsmall4277 6 лет назад
How much does it cost to do something like this
@davidfrison2765
@davidfrison2765 5 лет назад
I live on the Eastern coast of Canada and we use salt on our roads in the winter and it destroys our cars.. You can literally tell when someone buys a car from central Ontario or further out west because of the fact that the car isn't sitting in the scrap yard
@dennisleporte2327
@dennisleporte2327 5 лет назад
pretty freaking amazing
@efrains54
@efrains54 4 года назад
Can you upload the finished Impala?
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 3 года назад
It came out pretty, trust us.
@bbbustedflush
@bbbustedflush 6 лет назад
Why didn't the video show blasting around door handles?
@sklaboratory3983
@sklaboratory3983 5 лет назад
Excellent!
@rodclark2964
@rodclark2964 4 года назад
how to find bondo
@bobbyjojo
@bobbyjojo 5 лет назад
It is obvious that this car needs extensive metal work. But what about the paint on the door jams and under the hood and trunk?
@jmontyme
@jmontyme 6 лет назад
I'm not a car guy nor even a manual labor kind of guy. But I still kinda want to do this. Looks fun!
@Blaze_1961
@Blaze_1961 4 года назад
Any issues with various city ordinances?
@jaggerwild
@jaggerwild 5 лет назад
Your putting water on bare metal, is there a prep to use after this is done to help neutralize it? Aside from Chem wipe...........
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 5 лет назад
Totally. We sell a Rust Inhibitor that you add to the blasting water. Prevents flash rust for up to 72 hours.
@unicornwolfteam718
@unicornwolfteam718 4 года назад
What does it do to the crome and glass on the car? Mess it up?
@martinhuerta4492
@martinhuerta4492 3 года назад
Would come in handy with all my bmx frames/parts
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 3 года назад
It would make easy work of those for sure.
@Demmytry
@Demmytry 4 года назад
Круто, а что за абразив в воде, кварцевый песок?
@shiddy.
@shiddy. 5 лет назад
looks very good
@EM-fi2qg
@EM-fi2qg 6 лет назад
What does cleanup look like? Are you sweeping up tons of debris? And does it damage chrome and glass?
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 5 лет назад
You can sweep or shovel up spent media from a hard surface. Another method is blasting the project over plastic sheeting, which can be rolled up and disposed of. Blasting will etch chrome and glass, so if the customer plans on keeping those, they can be masked off with tape and cardboard.
@rickydurrurrnga2873
@rickydurrurrnga2873 6 лет назад
Wow That's Very very Beautiful I Like That Where Did You Buy That
@mundrubjet
@mundrubjet 6 лет назад
Sooooo... what happens to the abrasive which the narrator said was recycled bottle glass?? Also, where does the paint and primer go that came off the car??
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 5 лет назад
The Dustless process keeps everything contained to a very small radius. When you're done blasting, the spent media and coating can be swept or shoveled up and disposed of. You can also blast over a plastic sheet to make cleanup easier.
@desyquintero8451
@desyquintero8451 3 года назад
Plot twist, this video is in reverse . All the guy did was paint the car and yall dummies think he took the paint off. Im not falling for that.
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 3 года назад
Possibly..... but you will never know.... will you .....
@McLovin420_LoE
@McLovin420_LoE 3 года назад
How much for the DB500 mobile. Not as much as nice truck like actaully price?
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 3 года назад
Our turn-key mobile units come with everything you need to start a profitable business, and they start at $43,500. We have financing options on our mobile trailers for as little as $4350 down and $980 a month - or our standalone blast pot units start at $5995. www.dustlessblasting.com/products/mobile
@Ibnalyemen
@Ibnalyemen 5 лет назад
That’ was a strong ass hand shake
@simonloveless8924
@simonloveless8924 4 года назад
Great wonderful machine like to say.
@williamblakeley3744
@williamblakeley3744 5 лет назад
Wow that's Awsome 👍
@mizellhobbyshop
@mizellhobbyshop 6 лет назад
15 MINUTES TO MASK IT OFF.... i have to see that to believe it. maybe 4 guys can do it that fast, and they have to be very familiar with the car (meaning taped off quite a few cars exactly like it) But i dont see one person doing it that fast.
@robertmccully2792
@robertmccully2792 5 лет назад
Their website says 300 per hour nationwide average. And where do you buy 50 lbs of media for 10 bucks,, and he said 6 bags of 50 pound for 60 bucks... Now if all that was true i would buy one.
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 4 года назад
This is assuming you use two four-armed men.
@tootall5559
@tootall5559 6 лет назад
where does the old paint and glass go? Are there other mediums you can use with it? If you don't trap the old paint and glass beads aren't many places going to give you grief over it?
@DustlessBlasting-MMLJ
@DustlessBlasting-MMLJ 6 лет назад
the glass is typically a 40/70 grit and when mixed with water traps the paint and falls to the ground. If on concrete it can be swept up. If you are over another area and want to lay down a tarp - it can be rolled up and disposed of after the job is complete. The media itself is 100% inert and non toxic and won't cause harm to grass, plants or the earth.
Далее
Dustless Blasting Mortar and Concrete
5:10
Просмотров 415 тыс.
Cheese grater HACK
00:22
Просмотров 1 млн
Blast Medias Compared and Demonstrated
27:24
Просмотров 161 тыс.
Dustless Blasting on Performance TV!
19:08
Просмотров 117 тыс.
SandBlasting Heavy Equipment Rust Removal
40:28
Просмотров 118 тыс.
😧КУПИЛ НИССАН И УДИВИЛСЯ!
0:17