Тёмный

DX6i & CCPM Full Setup Guide Part 1 Setting Up The DX6i 

RcHelpDotCom
Подписаться 25 тыс.
Просмотров 232 тыс.
50% 1

Come Visit The Forum!
rc-help.com/forum.php
Like Us On Facebook!
/ rchelp
Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how to" video that covers everything from start to finish?". Well, that is exactly what I have done.
This series is going to show you exactly what to do to setup your DX6i, set all your swash, pitch, throttle curves, gyro settings, end point's, and everything else in the radio. Then, I'm going to show you exactly how to bind the Tx to the Rx. Then, setup all fo the servos on the cyclic, adjust all the links to get the proper swash height so you get the same pitch up as you do down, set the blade tracking, setup the gyro outside while hovering and getting the swash correct for FF or forward flight.
So, sit back and enjoy this series. I will also try to get the WHOLE series on my website so that you can download it, adn watch it anywhere you have a computer. No internet required after the download.
For detailed questions, please visit my forum at www.rc-help.com/forum
~-~~-~~~-~~-~
Please watch: "Aomway Commander V1 Goggles Updated Version Discount Code"
• 👍$279 Aomway Commander...
~-~~-~~~-~~-~

Опубликовано:

 

14 апр 2011

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@serviceoverself2375
@serviceoverself2375 Месяц назад
I can't believe more users did not give you more thumbs up. Your presentation is amazing.
@melvinw.quinene841
@melvinw.quinene841 3 года назад
I gotta tell you, this tutorial has made me understand 110 % how to set up my DX6i so easily, very, very comprehensive !!! THANK YOU SO VERY MUCH TONY !!! I think that now I can set up my Blade 400 to where she is gonna fly very smoothly great video !
@Rcdoski
@Rcdoski 2 года назад
I have to say thank you so very much for your 5 videos on the Dx6i and ccpm setup. My Dx6i stopped working on rudder channel recently and I sent it in to Horizon hobby. They fixed it for only the cost of shipping wow a 10 plus year old raidio. But had to do a firmware update which wiped out all the models. I had 7 helis on that raidio and with your videos I have them all programmed back in a very short time. Thanks, great vids.
@deatharmor100
@deatharmor100 13 лет назад
good god man !1 you just saved my world , i was completly lost ,but now because of your vids , i can teach someone about the dx6i set ups ,thanx a million dude!!!
@44Skippertje
@44Skippertje 11 лет назад
Hi there. A friend of me, has helped me out with the problem. He told me that some of the cables was not plugged in right. Also we solved the problem with the swash. Thank you for your response.
@ritchieme
@ritchieme 11 лет назад
You my Sir are a star !
@andrelafreniere8604
@andrelafreniere8604 Год назад
Awesome, you saved me lots of time. Thanks
@209cynical
@209cynical 13 лет назад
really like watching your videos
@serviceoverself2375
@serviceoverself2375 Месяц назад
Amazing!!! Thank you for your help.
@PATROLMAN2056
@PATROLMAN2056 12 лет назад
Cool vids... Lots of help thanks dude!!
@benumguritno5041
@benumguritno5041 2 года назад
Very clear explanation...tq so much
@Droneil70
@Droneil70 13 лет назад
God Bless youre my hero!...good luck buddy and more videos
@mattyboy111222
@mattyboy111222 12 лет назад
thanks for ur help on that one mate
@coolgabsi
@coolgabsi 13 лет назад
great that you posted you this!! thanks a lot tony!! :)
@mrerick0363652
@mrerick0363652 11 лет назад
Keep making great video thanks for information first set i just brought a new blade 450 and i also a blade sr would like all the information you can give me and thanks again for the video
@ring4ahit
@ring4ahit 11 лет назад
Ok will do thank you
@TheDillonma
@TheDillonma 12 лет назад
if you have the gain in the radio installed does the pod on the gyro it self have any effect
@WillSr70
@WillSr70 12 лет назад
I just got my 450x with the dx6.The heli keeps drifting to the left,how can I stop that,and is there any setting to get quicker response once the stick is returned to the center?
@yoodoo122
@yoodoo122 11 лет назад
I am a newbie on the heli side but are you meant to set the throttle trim to zero???
@otrosmd
@otrosmd 11 лет назад
hi. which is the recommended value of d / r expo, in a trex 450 pro. in 3d and normal flights, thanks
@ring4ahit
@ring4ahit 11 лет назад
Hi I got a used trex500. With a AR7000 receiver and I got a dx6i controller. Try to bind it but the receiver doesn't blink. Any idea what is wrong? Thank you.
@tommybt9679
@tommybt9679 3 года назад
Thank you
@MrLeeRossi
@MrLeeRossi 10 лет назад
tony I have a few questions regarding my e flight blade 400 RC helicopter I have zero pitch at half stick on my dx6i transmitter but the helicopter will not lift off the ground I am new at this so I could use some help I've watched your videos they are great but I still need help. thank you lee
@ingeniousozone
@ingeniousozone 12 лет назад
I got to swash mix. Clicked. INHIBIT appears on the screen? How do I change this to show the screen you have at 7:29?
@DominicGreen432
@DominicGreen432 11 лет назад
Is this ash to use for a beginner, first transmitter! And can it be switched for mode 2 to 4. Will this fly a champ??
@ring4ahit
@ring4ahit 11 лет назад
Thank you it worked. But no power to the motor. Lol cyclics go up down but blades don't spin.
@44Skippertje
@44Skippertje 11 лет назад
Hello, Since that i have infected with the modelflying virus, i'm very interrested in flying with helicopters. I've followed all of your video's but still i got an problem with one of my servo's. I have plugged in all the cables into the reciever , but stil one of the servo's is not working or working on an half way. I've used your settings into the DX6I to program the transmitter. In one of your video's you are showing how to plug in the cables, but somewhere i've missed an spot.
@reltubfamily
@reltubfamily 13 лет назад
tony, i have bought a bind and fly blade 400. therefore i don't have the standard factory settings with the dx6i, would these settings be suitable for my helicopter given that i'm novice .......Ian
@dizzychizzy1
@dizzychizzy1 10 лет назад
Help!!! man sounds like you know your stuff.... Quick question, I am installing the back light (6xi) and that seems all good. BUT I have a spare toggle switch and I want to have the backlight switchable.... would you have any pointers?? I see you have tricked out your logo with the night rider effect.. Nice
@hillbillypetej
@hillbillypetej 12 лет назад
Would you say yr set up is good for a beginner not the stunt mode as iv just got a dx6i
@dozermanful
@dozermanful 12 лет назад
With my Swash Mix, I set my elevator is at -60 the rest are set on 60+
@EviLNox8
@EviLNox8 12 лет назад
I would be afraid to install a backlight in case there is some other problem I don't know about yet that needs to be fixed with warranty. I don't want to lose it by moding my radio.
@droptopmaids8474
@droptopmaids8474 3 года назад
Please help me. I have a perfectly good blade 4503d I just can’t get it right. I can fly it, do back flips front flips. I just can’t adjust settings Thanks
@eletronica1857
@eletronica1857 6 лет назад
hi, plz, how u put back light on display ? its very nice, cuz dx6 display is too bad do see
@eletronica1857
@eletronica1857 6 лет назад
tnx so much for your reply !! hugs from brazil 1
@yoodoo122
@yoodoo122 11 лет назад
Thanks for that.
@ingeniousozone
@ingeniousozone 12 лет назад
Figured it out. Was on 90 not 120.
@geraldobrasil5964
@geraldobrasil5964 5 лет назад
AMIGO BOA NOITE. , voce pode me ajudar.. veja se estou certo. no radio dx6i, na parte do PITC CURV 26=33=50=75=100....... AQUI eu vou verificar o pase das pas certo? no radio puxo alinha ate 50% e no estik no meio do radio, no pit gauge 0% e alinho as pas para 0%.. fiz tudo isto certo, DETALHE. notei que o braso do acelerador ja esta quaze todo aberto, quer dizer que estou com quaze toda acelerasao. PERGUNTO..este braso do acelerador nao teria que estar tamben a 50% para acompanhar toda esta regulagem. porque fui testar e notei que ficou muito alta a rotasao, ai nao insisti no voo.....NO THRO CUR ...0=25=50=75=100... Montar e desmontar heli nao tem segredo. criar peças eu faso, sou mecanico de automovel e nao vo desistir deste heli.ja procurei aulas de configurasao e nao encontrei, HELI RAPTOR 30 NITRO CLASE 550.
@RcHelpDotCom
@RcHelpDotCom 5 лет назад
google translate is having a hard time translating some of the things you are saying, and unfortunately I don't speak Portuguese. I will definitely help where I can, but just need to know what it is you are needing help with. If you can, come over to the forum and post up there. I'm quite busy right now and I find it hard to find the time to reply to messages currently. www.Rc-Help.com
@coolgabsi
@coolgabsi 13 лет назад
@RcHelpDotCom what happened?? they didnt like you crashing that mcpx too much.. :P ...lol... i am sorry!, just kidding!! :) my name on rchelp is rahulgaba, thanks tony! :)
@danhill9317
@danhill9317 4 месяца назад
Q😅i0
@danhill9317
@danhill9317 4 месяца назад
Q😅
@Low4show09
@Low4show09 13 лет назад
Dude don't no how to install it I would broke something knowing me I'm a rookie I told u before I would for u to install it only or I will just buy the dx8 instead if u won't do it
Далее
Кто Первый Получит Миллион ?
27:44
Spektrum DX6i Setup for Helicopter - Part 1 of 3
10:09
Flybrarless helicopter setup in Spektrum TX
14:42
Просмотров 20 тыс.
AR7200BX / Beast X : Setup Guide #1 (FreddyCanFly)
38:17
Swash Mix Explained
9:51
Просмотров 65 тыс.
How To Set Dual Rate & Expo For RC Plane DX6i
7:41
Просмотров 89 тыс.
all 3 SAFE modes on dx6i
6:14
Просмотров 43 тыс.
GPS Drone disguised as a RC Helicopter
11:54
Просмотров 502 тыс.