Dyno Tuning my GPI 416 Camaro- FINAL POWER NUMBERS!!! Ep. 18

Подписаться 60 тыс.

Просмотров 24 тыс.

50% 1

Chassis dyno, Engine Dyno & Head Flow Numbers are in the Outro. Built alongside ‪@GwatneyPerformance‬
Gwatney Performance Innovation: gwatneyperformance.com/ref/11/
GPI MAX 2.0 Heads & Cam Package: gwatneyperformance.com/introd...
‪@HolleyPerformance‬ Holley Performance: holley-social.com/KaylaRundle
‪@HPTuners‬ HP Tuners: www.hptuners.com/mpvi3/
Kayla's Instagram: / kaylarundle
Business Inquiries: KaylaRundleDesign@gmail.com
#teamgpi #DynoTune #Maxeffort416
*Notice Monetized, Affiliated & Sponsored Content may be included in the video or description. If you make a purchase on items shown in the video, I may get a small commission. Thank You for your continued support on my Channel. Featured driving clips may be exaggerated for entertainment purposes. Drive Safely & Modify under state laws.

Авто/Мото

Опубликовано:

14 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 148

@victorwilburn3498 Год назад

Kayla: You built your engine "right" because TORQUE is what accelerates the car on the street/road course. Your close to 600/600 wheel which will be wicked fast on the street/ off a corner on track. A strong clutch upgrade will be key to complete your package. These days lots of options to have the clamping force your motor requires AND still be managable "effort" to daily the car when you want to. You got it wired now Kayla👍.

@guitarsandcars2586 Год назад

I agree. As someone who loves mustangs I only wish you could build 5.0 coyotes for more torque.

@northernninja3321 Год назад

Awesome, I bet it sounds wild in person. can't wait to see your first drive. Hope you filmed it! I figured you wouldn't pick up much with the intake disconnected, modern intakes are pretty good! plus the couple degrees cooler charge temp helps make up for it. Impressive flow on those heads too!

@C10Scottsdale Год назад

Great video Kayla, always good to take it in steps as it makes tuning easier. Your car sounds so good. I hope when I eventually change my 1985 C10 which I bought new over to an LS3 sounds half as good as yours did before your build would make me pretty happy. You do a very nice job on the videos as well as the audio which I think speaks of your professionalism in what you do. The only problem I use to run into when building a bike or a car is knowing when to level off and be satisfied for a bit. Have fun with the car and good luck on any future mods Respect the power and "drive on".

@omaredwards3765 Год назад

Thanks for the info and inspiration. I just bought a c5 Corvette and am interested in doing a power build similar to yours. Every time I see someone else fulfill their dreams, it gets me motivated ya know? Happy for you chica.

@josephsolomon8623 Год назад

Awesome Kayla I'm real happy for you I knew it would hit in the least 600 my 11 Camaro SS hit 502 horsepower on my rebuild nowhere near as high-tech as your build was I really love the 5th gen Camaro she's my baby all right Kayla I can't wait to see the next video stay safe Kayla

@Christian-en2kf Год назад

Congrats Kayla, absolutely beautiful car!

@chadoliver2966 Год назад

Great video and awesome build

@jcvinaja5542 Год назад

You explain the dyno sheets very well including what you are looking for on the power band when it comes to torque vs horsepower. You car came out great. Love the sound of it. I still remember when you posted the video of your camaro getting hit and had good amount of damage plus you crying. Your car has come a long way. I hope you have lots of fun with it.

@KaylaRundle Год назад

I appreciate that so much. Obviously I could sit there for hours describing everything but that's not necessary. Glad it makes sense! Thank you for all the support along the way. That was only one year ago, it's crazy how fast this all happened!

@rolliefoster2837 Год назад

...that's just awesome - good for you, girl - loved the series on this build & testing - now go have some fun !...

@loubianchi2577 Год назад

Kayla.....Your BIG grin says it all !! Fantastic job.

@jenseman4476 Год назад

👍👏She Barks!! "Pretty Mean!! "Love it.

@keithmyers6121 Год назад

Congrats KAYLA!

@brakesitr Год назад

Looking for clutch, I recommend Monster Clutch 2 disc rated for 700HP. I have it on my 2013 Camaro SS with over 60K miles on it. Easy on the clutch pedal, makes sure you get the remote bleeder with the kit. Mine cam with aluminum flywheel. 💯 my is 416CID has over 30k miles on the motor.

@markj6049 Год назад

That's quite an amazing torque number! The specific torque (torque/engine displacement) just about beats the C8 Z06 - that's a bit of an achievement for a pushrod engine!

@zachariahsmith1322 Год назад

Just the video i been waiting to see

@KaylaRundle Год назад

Woohoo! It's been a long ride for this build- Thanks for staying with it!!

@joecameron3406 Год назад

ROWDY for sure. Torque rules. It would be interesting to see full exhaust versus exhaust cutouts. Gonna be a handful getting traction now. Can't wait to see your impressions of first street drive

@casanovablacko2534 Год назад

N/a WOW factor!! I dig it 👌

@michaelelisy364 Год назад

Sounds insane. Have fun as I know you will by that smile on your face. 👍

@zaknefain100 Год назад

1.4 tq/CID is something of a benchmark for a great engine build. Definitely nothing to sneeze at. I'm guessing the power loss to the wheels, is something closer to 18%. I'm liking this build vs going LS7.. which is what I've been considering for my Ultima GTR. Gives me more to think about!✌

@grahamerosewarne6656 Год назад

Sounds so healthy and anything around the 600 + is more than enough for You to play with Kayla 👍🌹 Aussie Fan 💪🇦🇺🤘

@KaylaRundle Год назад

I agree! I don't need more power than 600 for what I do. Very happy on the outcome... GPI IS THE BEST!!

@brandondarnes3699 Год назад

🔥🔥🔥

@brentbonham9427 Год назад

Congratulations

@jayczyzyk9707 Год назад

Very kool

@Gladius_ZR2 Год назад

You know your a car gal when you love the smell of E85, definitely sounding like a monster now lookin forward to the track videos! 👌

@KaylaRundle Год назад

I haven't been able to understand it until now. Since I know the smell of my own car so well now I understand how much better E is!

@Gladius_ZR2 Год назад

@Kayla Rundle Definitely makes sense when you add a new smell to familiar ones, I'm sure it's gotta smell better then raw 93!

@TheTexican05 Год назад

As a testament to GPI’s tuning, and the big breathing LS7 heads and intake, this combo made 600 at the tires and 733 on the engine synopsis, with a very conservative 242° intake lobe on the cam. 😮 😳 💪 That’s very mild duration for a big 416 (for the desired torque delivery of a road course build). A lesser build would’ve given up a ton of horsepower on top. This one did not disappoint! It was also really cool to see how well the top and picked up power with the addition of the E85 and more timing. You can see where the power curve carried strong all the way to 7000. Big thanks to you and GPI for being so thorough with this build, and for documenting the details for us to observe and learn from. 🍻

@TheTexican05 Год назад

Apologies for the typos above. YT is not letting me edit the comment to fix the autocorrect spelling snafus… 🙄 🤦‍♂

@SSCamaro_Sno Год назад

That SS is a Beast💯💪🏾

@nicktheamsoilguy Год назад

Love the smell running E85!

@AB-80X Год назад

I don't know what kind of E85 there is where she is or where you are, but the quality VP E85 I use, stinks like dirty socks. C16 is what smells nice🙂

@LT4_Gio28 Год назад

I’m in the market for a 441 build and I been in contact with GPI about the build, but stock LS3 you made 500 and then dropped a 416 in there with a lot of modifications and you only made 101 extra WHP that’s hard for me to see but still happy you cracked 600

@wesleybeeson1818 Год назад

That 500 was not stock. Had a big cam and bolt ons. Just stock displacement

@wesleybeeson1818 Год назад

Stock ls3 Camaro is 370 whp. She then gained 130 initially. Now another 100. This is awesome

@KaylaRundle 11 месяцев назад

@@wesleybeeson1818perfectly said. Thank you so much ❤

@KaylaRundle 11 месяцев назад

From a built LS3 to a built 416.. staying NA and gaining 100hp is HUGE!! Message me with any questions, I can try to better explain!

@cliftonaucoin6493 Год назад

It sound great

@its_taps Год назад

🔥🔥

@ArthursYoutubeChannel Год назад

Congratulations...You sound like a pro. Have fun ...Be careful

@KaylaRundle Год назад

Thank you!!

@ricktaylor3748 Год назад

Kala, your new engine sounds killer.

@KaylaRundle Год назад

Thank you!! I love it!

@AmraphelofShinar Год назад

Nice car with a sweet engine. My poor little 3rd Gen's 305 only makes 170hp. Well, maybe not now, but when it was new anyway.

@adamhodge9759 Год назад

Your car is awesome

@sniperlif3 Год назад

I want to see this beast. I live less than 10 minutes away from GPI. I have only at 493 wheel on E, but I am on a 6th gen. Hopefully you haven't already left. Careful of E85 all the time. It does damage to rubber, especially O-rings, and of course E-85 is a magnet to water, so don't leave E in it while the car sits for a while or you can ruin your engine. Surprised that they did 100% E. Normally tuners don't recommend more than 50% because there usually isn't much benefit beyond that(but I think that is most likely because of stock internal builds). My personal tuner in Arkansas recommended about 30% E mix with 93 because I didn't gain anything beyond that but could slowly hurt the engine/fuel system.

@ccooper04 Год назад

Who was your tuner? I’m about 10 minutes from gpi as well. I’ve been debating between gpi and kk performance for my tuning.

@ricktaylor3748 Год назад

Kala, you should ditch the E-85 fuel, it has corn alcohol in it. Which will gas wash your rings and cylinders. it's like running your engine low on oil. I suggest using Shell or Sunoco premium with some Lucas REAL octane booster, it makes 20 gallons of 93 octane into 96 octane. You really don't want ethanol in your fuel. (BAD stuff.) You can always use more Lucas. Depending on how high you want the octane level. I wish you had started your engine with open headers.👍😁

@gabeesquivelLethalZR1 Год назад

Hi torque mini starter from gm will work great and very reliable, just put heat blanket on it.

@popatop6657 6 месяцев назад

I am looking for a build like this What did your build cost and what kind of fuel mileage are you getting on the highway driving it nice?

@philt7074 Год назад

Other than you liking the smell of E85 over the 91/93, what was the difference between the E85 and 91/93 pulls? Was the difference worth adding the flex fuel kit to the car?

@KaylaRundle 11 месяцев назад

Not a huge different being NA.. only 10HP but it’s there if I ever add more power in the future!

@MiniOne82 Год назад

Shes come along way. From loosing a rear wheel to having a 416 lmao!!! Awesome Job Kayla XD

@KaylaRundle 11 месяцев назад

This means so much! Thank you!!

@bmwe30guy Год назад

Keep in mind, roto-fab is north of you up in Camp Verde!

@yolofullsend Год назад

To put it in perspective made 575hp on a totally stock l99 with 10 psi of boost.

@KaylaRundle Год назад

Boost is a completely different set up and was not what I needed for my application. Aiming for more Constant Torque over max HP.

@yolofullsend Год назад

@@KaylaRundle right.. my point is.. thats how much power equivalent youre making now. It's a lot

@jenseman4476 Год назад

You need to "Throw some "Subframe Connectors in🤗

@5thgen_ttf49 Год назад

Welcome to the 600 wheel club lady 😎👍

@realshidd3062 Год назад

I bet that thing runs like it makes well over 600 to the wheels that’s a lot of power especially naturally aspirated but if you are looking to make more power go with a solid roller cam

@AB-80X Год назад

Have you seen the cam they used? There's a lot left on the table even if she stays with a hydraulic. She can lift well into the 700's with some of the newer lobes. Lift right now is like .639.

@donaldbitsinnie8088 Год назад

Chevy power 🔥

@cuzimaluzer777 Год назад

😘

@Moody_G8 Год назад

What was the compression ratio?

@KaylaRundle 11 месяцев назад

11.8:1

@jasonbrittain7110 Год назад

wish i had my NORI tail lights ordered them on 4-27 still don't have them

@KaylaRundle Год назад

Reach out to Chris from Nori Lights. He is super helpful and can get them done sooner if need be!

@stacydornan9765 Год назад

Sounds pretty healthy now Kay

@KaylaRundle 11 месяцев назад

Thank you!

@BrendanDalponte Год назад

Dang so close was trying be first comment good video

@KaylaRundle Год назад

You so fast!!

@owenmorgan857 Год назад

Thats some power for NA

@KaylaRundle Год назад

very impressive!

@wesleybeeson1818 Год назад

Do know your cam specs? Obviously custom with the 416 kit

@Carl_Jr Год назад

My guess @ 4:10 is 594 HP. Edit: One of the few times I'm glad I was wrong! 😁 😎👍 Side note: That blue shirt on you! ❤️❤️❤️

@dylangrewell2351 Год назад

Monster s clutch no doubt

@justinw6448 Год назад

Is your intake manifold ported?

@AB-80X Год назад

No. Go watch the video where they assemble her engine.

@realshidd3062 Год назад

Now all you need is weight reduction may be some fiberglass doors fiberglass hood fiberglass trunk

@KaylaRundle Год назад

I have been working on the eight reduction for a while- aka my Carbon Fiber Roof saved me 20lbs. A trunk is a good idea. I do not think I will change the doors until I have door bars for safety.

@505Goat Год назад

Not sure why you think you need an aftermarket starter, just get a factory one. Start changing unnecessary stuff and you'll have unnecessary problems. I didn't see details on what was happening, but if it was struggling to start while hot you probably just need to add a ground wire.

@markskala9107 Год назад

Agreed. Sounds like heat soak to me. Common issue on the fifth gen. Grounds at engine and at battery.

@505Goat Год назад

@@markskala9107 exactly. To me certain things obviously can't be left factory, but whatever can, should stay that way. Manufacturers put in a lot of R&D aimed at reliability, I find it best to leave what can be left factory alone....that's my advice though, everyone must do as they see fit.

@KaylaRundle Год назад

@@markskala9107 we added a Ground and grinded down the trunk area for more surface area. It helped but not enough. Battery fully died yesterday and I had to get a new one... could have been that too! I ordered a PowerMaster Starter regardless since my OEM Starter is 9 years old. I am no longer worried about staying OEM, I've basically replaced the entire car at this point lol

@AB-80X Год назад

@@KaylaRundle Put a 60Ah Antigravity battery in there. It will save you a lot of weight and give you over 1600 CA. Even if you have the best starter out there, it's nothing without power.

@evcass69 Год назад

Yeah, having the capability to leave the track to go to a parts store to get compatible equipment is great. I try to use acdelco/Delphi whenever I can for electronics.

@zl1chris904 Год назад

Tilto st 246 Clutch

@wesleybeeson1818 Год назад

Do you know your final compression ratio?

@KaylaRundle 11 месяцев назад

11.8:1

@wesleybeeson1818 11 месяцев назад

Oh! Ok ignore my repeat question in the other comments section then. Thanks!

@KaylaRundle 11 месяцев назад

@@wesleybeeson1818 you’re all good!! Just going over late comments lol

@jamesdelong6401 Год назад

Clutch. Centerforce clutch. Drive shaft. Chrome moly drive shaft. MUCH strong than carbon fiber and cheaper.

@AB-80X Год назад

Stronger than carbon? Okay. Tell that to all the 4500-5000 hp pro mod teams out there. Unless you get some kind of low rent oddball carbon shaft, you can always get a shaft that is stronger than a metal shaft in CF. Why waste power with all that weight when a carbon shaft will work and work a hell of a lot better?

@Dalekennth1969 Год назад

hello i thought you put a new clutch in it most people do when rebuilding motor would be easier seeing as the motor out of the car

@KaylaRundle Год назад

That was the plan but the part didn't come in time. Put it in a few days after everything was done!

@aakar88 Год назад

Sounds as mean as a COPO!

@cal200 Год назад

What are the cam specs?

@AB-80X Год назад

238/256 .648"/.639" 113+4

@jeffmoody9868 Год назад

Get an msd dynaforce starter. You won't be disappointed

@KaylaRundle 11 месяцев назад

I got one now! Thank you!!

@mikeemikee1610 Год назад

For the next vid . Break down the expenses on this build.

@KaylaRundle Год назад

Not a bad idea, but all prices are available on GPI's website!

@shorttrackthing6919 Год назад

Reminds me of a NASCAR kinda

@MrJoseeclipse123 Год назад

How much they charge you? took me 7k to get 600 whp

@KaylaRundle Год назад

There are super easy ways to get 600whp including a $300 Nitrous kit. However that was not my goal for this build. Prices for all the individual parts can be found on GPI's Website. The MAX 2.0 Heads alone are worth more than $7k...

@MrJoseeclipse123 Год назад

@@KaylaRundle i have heads cams only not nitrous and got the 600 whp

@MrJoseeclipse123 Год назад

@@KaylaRundle you feel good that what matter.

@MrJoseeclipse123 Год назад

@@KaylaRundle same here mi goal was reability and everyday car 1 year already 600 whp na and no problem. Congrat f9r yoyr build.

@whitelightningmiw Год назад

When you say “road” does that mean you’re going to race it on road courses or are you referring to something you can drive relatively easy on the street? If you’re going to road race this thing, this channel instantly became more intriguing. Speaking for myself anyways.

@KaylaRundle 11 месяцев назад

I mean road courses specifically like Apex, chuckwalla, Vegas speedway, Spring Mountain, NCM and more. But the car is still streetable so it’s reliable and not over the top!

@JoeSmith-nu8oo Год назад

Now run it with open headers😝

@dennisrobinson8008 9 месяцев назад

The torque numbers on your engine are supèr high. A ls7 427 ci with heads cam and tune might make 540 to 560rwtq youre making almost 600rwtq. Which ive never seen.

@gen2-x364 Год назад

Nice reliable numbers. Get a carbon fiber driveshaft.

@KaylaRundle Год назад

That is the plan!

@davesober2093 Год назад

...thickness.

@jetboatracer5967 Год назад

You only gained that much from a basically stock motor?! My BBC in my jet boat makes 780HP NA. WTF to me that's a waste, but of course no money out of your pocket 🤣

@sammckay5418 Год назад

Do you read what you write before you post or…

@KaylaRundle Год назад

My goal was not to reach max HP. This is for Road Course & Time Attack applications so the torque curve was much more important with smooth shifts in the higher range to reduce wheel chirp while racing. We all have different reasons for what we do, but this fits me perfectly!

@wesleybeeson1818 Год назад

Stock is 370 whp, she was already modded to 500 and new mods to 600 whp. This is outstanding!

@edddiaz4202 Год назад

Build the trans

@KaylaRundle Год назад

I Installed a 900whp Twin disk Clutch. TR6060 is pretty strong for what I have!

@badarbiter15 Год назад

DONT run the carbon fiber drive shaft. They are much weaker and known to buckle and shatter under high torque like what this thing makes. Go one piece aluminum for sure. Almost 2000lb ft of torque rated

@Slowcarfastbeans Год назад

If you want to see a man cry, give him PTSD from bubble wrap snaps.

@rylordrylord7347 Год назад

Bet you won’t race me though

@KaylaRundle 11 месяцев назад

Let’s go!

@AB-80X Год назад

Mantic clutch. Do it right, do it once.

@evcass69 Год назад

My Mantic Twin started slipping less than a year after install by a recommended shop with only ~500rwtq. US sales rep couldn't explain it. I switched to a Monster S Triple and so far the feel and holding power have been great. The extra mass helps on the street but I can feel it's a bit more sluggish in the high RPMs vs the lighter Mantic kit. Compromises *shrug*

@AB-80X Год назад

@@evcass69 That’s very odd. I have had them hold up for much, much longer in front of way more power. Same for everybody I know who runs them. There must have been an issue somewhere. Either the install or bedding in. Or simply how it is driven. People often overrev the engine in takeoff as to not stall the engine. This can lead to premature wear, especially if not bedded properly. It needs to be clutched like a light weight race clutch

@larryssnova76 Год назад

27 total timing with e no way should be like 36 to 38

@WHERESSS Год назад

36-38?? even best power is made 28-32

@Carl_Jr Год назад

LS based engines don't need that much advance. Their head chamber design is so far advanced compared to a SBC they will literally make less power with more advance.

@bmwe30guy Год назад

More efficient builds need less timing to make power I'm 21° 91 26° e70

@AB-80X Год назад

So much determines what timing is needed, but mostly the CR and piston design. They run over 12:1 and a flat top. 36-38? Nope, it's not a BBC with dome pistons.