Dyson DC41 | Thorough disassembly and cleaning of root cyclone vortex and cannister bin | how to 

I looked at several videos but yours was the only one that gave me enough step by step detail to be able to take apart the cyclone vortex. I'm a fan. Thank you.

Thanks bootsowen. Who the hell would buy another dyson vacuum cleaner? Over designed overpriced. I bought a simple Henry or Hatty with very large throw away or burn them bags. Simple cheap vacuum. by the way my son and I have science degrees and this vortex design is just bells and whistles. Filthy cleaners.

I cleaned mine without removing the screws. Works just fine. Thanks for the video.

I ll have a crack at that but I won t bother taking the red lever out from the spring as it was a pain to get back in .Glad I watched this or i would have given up

great video! I did this exact cleaning this weekend, 2 take aways I found. the white plastic piece that has the inner lip that catches a lot of dirt can be removed from the minicyclone array and for taking the gauze off, once the I had the gap established with a screw driver, I used a paperclip and toothpicks to walk that section off.

The thing about bagged machines the smells go to the motor and you can’t clean out the bag compartment to get the smells off. The first time I took my daughters DC37 apart I thought it was hard.. but I just bought a 10 yr old DC37 for my son and it took no time to do the tear down. I will let it dry for a few days to be sure and that takes the most time if you need it sooner.62 yr old gramma here with free time to do it though.

Found one of the law today at the thrift store. Paid 18$. Cleaned it all except for where you need the torx screwdriver. Didnt have any. Will get some but this thing runs smoooooth

Wow, you saved me hours of aggravation and aspirin. Not to mention a trip and money to the vacuum repair shop. Amazing! Hats off to Bootsowen!

Thank you, cleaned mine without removing the screws, but I did use a small bottle brush in those areas and a hair dryer to blow the dust out. A little easier. Great video.

Thank you so so much. I got gifted one of these a year ago and I’ve been using it since. I just started cleaning it for the first time (shame shame) and it is soooo nasty. I was stumped when I got to this part of my disgusting journey. I appreciate the walk thru!

Thank you!!

Thanks! I cleaned my 2013 DC41 animal. It isn't exactly the same but close enough that following your video made it possible. I hope to get another decade of good service out of this machine.

Love this video! So good! It's inspired me to clean out my DC41 cyclone for the first time in such a detaield manner. Very good and soothing voice and great presentation! Thank you Bootsowen! I'd be interested in your other appliance maintenance videos. I disassembled my front loading Electrolux and removed the drum, cleaned a ton of dirp off the rubber seal. That was amazingly satisfying! Nobody has any idea how dirty those can get! 😉

Can you wash the hose tube?

Amazing video and a HUGE help!!!! The spring was an issue for me so I had to watch a few times. Your instruction was clear and super helpful! THANK YOU!!!

Thanks , this was helpful . I appreciate . Hopefully I can put it all back together tomorrow !

Best disassembly vid I've seen on the topic. Well done lad🍻

What size torx screwdriver did you end up using?

I agree I was recently given a DC41 I prefer a nice bag vacuum. My current one is a simplicity which I adore. This Dyson while washable just seems needy and it doesn't impress me much.

This was a tremendous help!!! thank you for making this video

Who knew the little end of that spring kept the middle red piece lined up with the big red piece? Drove me crazy. And thanks for zooming in!!!🙏

Excellent video. Thank you.

Hey man thanks you saved me a great amount of time great job

Whoever decided it was a good idea to stuff those dumb little torx screws down in that ridiculously awkward spot buried up in there has never tried to take something apart. Gotta love engineers. Thanks for the video, the canister release button on my DC41 broke and I ordered a new one. I was worried I’d have to take the whole thing apart to get the bottom part of the button out but when you missed reinstalling it before you reassembled the top and found you could just stuff it in the side it saved me the aggravation of trying to get those torx screws out and back in again.

Next..do motor and stick assy...I am stuck on removing the stick from the motor assy

Thanks for video m8 help's loads in doing a deep clean with out braking it saved me loads of time .

My DC41 dust canister/bin has started to fall off the vacuum. When engaging the vacuum rollers and snapping it back in, there seems to be some flex in the gray handle. It's like the dust bin is able to just barely be able to start to fall out because of it. It doesn't really look like the plastic is worn, but hard to tell. Do you think it's the spring inside the part at 2:35 starting to wear? Any ideas how to make sure it doesn't pop off until I actually press the release button?

I sure hope you wore a mask..

Spot on nice video

Hi, great video, really helps build confidence in tackling a job like this. Just one question. The bastard screws around the 9 minute mark - are they just standard Phillips cross slot screws or more exotic? My Phillips screwdriver is struggling to make them turn.

Nice job

thanks for the vid! :) exactly what I need

Good video

Thank you for this!

Hey great video saved me a ton of frustration as well. Now my Dyson is nice and clean. Took one extra sep and let it all dry before reassembling and also lubricated all the O-ring areas with silicone. To keep the gaskets from cracking.

That white part on the dyson dc 41 is removable gasket because I took mine apart today and washed it and let it dry

Excellant video, my brother. Thank you!

This video was great! Our vacuum is clean and happy now. Thanks for the detailed instruction!

This video was great. Very detailed! Thanks

Just got rid of my DC41 like a few months ago because of this problem☹️ and now I got a shark

Thank you