The Dyson DC65 is a muscular upright vacuum cleaner manufactured for multi-surface
cleaning. It has Radial Root Cyclone technology and also an active base plate brush bar to
clean all dirt and dust from the house.
How to clean Dyson DC65 clear dust bin
Do not use detergents, polishes or air fresheners to clean the clear dust bin. Do not put the clear bin in a dishwasher. Do not immerse the whole cyclone unit in water or pour water into the cyclones. Clean the cyclone shroud with a dry cloth or dry brush to remove lint and dust.
Look at the canister of your Dyson DC65. You can see dirt deposited on the filters in the dustbin of the Dyson DC65. You should clean this filter every three months. Now you see a blue tab between the cyclone. When you pull the blue tab, you can actually get the pre-filter. You can either see it dirty
or clean. Now I’ll tell you the process, how to clean post-filter and bin. So, how do you separate the upper part of this Dyson dustbin and the actual classical container? Just press the red button and holding your hands down. Now you can actually separate as a unit. You see a little button on the dustbin just below of the cyclone, you have to press down the button. I know initially when you see all your Dyson dirt, you just want to put it into a dishwasher or just want to let the water run over it to clean it. But not to do it, you need to have a dry cloth or a dry brush and then brush it off. Never
use water. Clean the canister upper part with water. Wherever you clean a Dyson with water, let it dry for 24 hours. It is very important that all parts of the Dyson are BONE DRY before you use your DC65 again, or else you might destroy your DC65. After 24 hours put everything back together and put it into your Dyson vacuum cleaner.
Leave me a comment if you'd like some further advice.
You can also find me on Twitter: / woopnik
repair engineering Dyson V15 Detect Laser Dust Technology cleaner how to
2 окт 2024
