Dyson Soft Cleaner Head - not spinning - kind of repair

Подписаться 1,4 тыс.

Просмотров 58 тыс.

50% 1

This is a strange issue, I didn`t understand exactly why the motor mount changed its shape and got damaged. Excessive vibrations or using it on the carpet may have something to do with that. Still, the roller doesn't look like it is unbalanced and vibrations are not much higher than usual.

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@Section82 5 месяцев назад

You legend. Solved my problem as well. Both wires were cut exactly like yours, and it was because the same exact part had its plastic "ring" that holds it in place broken where it fits in with the keyed plastic area. I just put some glue and some electrical tape around the edge to hold it into place. Hopefully it lasts.

@techfixPOV 5 месяцев назад

Glad it helped!

@srdankragulj6581 4 месяца назад

Nice job my friend!!! You saved me. Only thing is that the resistance is around 31 Ohms for my motor. After the repair of the wires the resistance is now 8 Ohms....Thank you for the video!

@techfixPOV 4 месяца назад

Glad I could help

@mbcobbler 7 месяцев назад

Hey. Thanks for the fix. This is the reason mine stopped spinned and this video helped get it going again. My plastic mount was also broken with a section missing. Used superglue and will see how long it holds for.

@techfixPOV 7 месяцев назад

Glad it helped

@n0tix-427 10 месяцев назад

Same issue for me (2 wires cut). Thanks for this video. Problem fixed! Thanks!!!!!

@techfixPOV 10 месяцев назад

Glad it helped

@davidk35 Год назад

Thanks- solved my problem too- in my case the wire was not cut but the connector got loose -very helpful !

@techfixPOV Год назад

I'm glad I could be of help.

@ivansantagata1826 3 месяца назад

Mine doesn't spin in any case, with brush and without brush, the rotor doesn't rotate What can it be? I don't know how to solve

@milenamimijovanovic 3 месяца назад

Merci beaucoup pour cette video, j'ai réussi a réparer mon balai dyson

@techfixPOV 3 месяца назад

Glad it helped!

@cyrusjay5034 7 месяцев назад

This helped me out a lot! Thank you!

@techfixPOV 7 месяцев назад

Glad it helped!

@Mysli0210 Год назад

Great video, helped me a ton!

@techfixPOV Год назад

Awesome, thank you!

@CAyou 9 месяцев назад

Exactly the same thing, it saved me! My version of the plastic part that's holding the motor was kinda broken, but some tough tape will do the job hopefully. Thanks!

@devonnonamaker247 9 месяцев назад

Mine is having the same issue. The brush head stops spinning but when I disassemble and test it without the brush head on, the motor doesn't stop at all. I made sure all debris was gone and it's still not working. What could cause this?

@robertos3712 Год назад

Thanks to U man I solved the same problem ! Great

@techfixPOV Год назад

You're welcome!

@rudolfspetersons1881 5 месяцев назад

This helped me a lot as well.. Thanks! :)

@techfixPOV 5 месяцев назад

Glad it helped!

@fvassu День назад

HI, I have the exact same problem but I'm not very good at soldering. Anybody knows where to buy just the new electric motor with new wires?

@truthhurts2149 Год назад

If you catch something with brush bar and it stops it this will happen. The plastic piece in mine shattered so it's not fixable without new part.

@techfixPOV Год назад

Yes, in this case, only a new part will make your brush work again.

@hennepplant Месяц назад

Thanks! Solved my issue 😀😀

@techfixPOV Месяц назад

Glad it helped!

@taylankelpetin9885 18 дней назад

Hairs get stuck in the bottom two wheels and I can't get them out.

@Toipno 4 месяца назад

Thanks you!

@techfixPOV 4 месяца назад

Glad it helped!

@mark100177 7 месяцев назад

Sounds like a defect. The plastic holding the motor was broken. I haven’t disassembled all the way yet, but I am sure the wires are cut, too. I thought Dyson is supposed to be good.

@techfixPOV Месяц назад

Compared to other products, they are generally quite reliable. Like any product, it also has weak points that do not honor the company.

@mr.writer2996 4 месяца назад

Hi when removing hair I cut through a black lining roller. The smaller purple / blue head won’t turn any quick fix please?

@techfixPOV 4 месяца назад

I'm sorry, I don't understand what you mean. Can you elaborate? Or can you send some pictures to TechFixPOVinfo@gmail.com?

@denisk7047 8 месяцев назад

I have a problem, the brush doesn’t spin on Dyson. But if I connect 16v directly to the brush It spinning🤔 All connectors on Dyson are clean and when I check by multimeter it shows that there are voltage on the Dyson connectors. Do you have any ideas?

@techfixPOV 8 месяцев назад

I think you have a problem with the electronic board of the vacuum cleaner. The board uses a MOSFET to power the brush and constantly monitors the consumption. It is possible that the MOSFET or another component is faulty.

@lawrencepoh7691 8 месяцев назад

My V8 soft roller is also not spinning. I tried to remove the soft roller but it is stucked at the other end. Any idea how to remove it. Thanks

@techfixPOV 8 месяцев назад

It looks like the plastic melted inside the roller. That can be caused by a stuck bearing (rusted?). You can remove it only by force, try to put some pressure on the roller with a flat screwdriver.

@mark100177 7 месяцев назад

How long is super glue and electrical tape going to hold it?

@techfixPOV Месяц назад

Until it breaks again. It would be ideal to replace those components. More recently I see that they can be ordered from Aliexpress (Dyson Motor Bearing Assembly - around $5).

@ZeeSlans Год назад

Mine doesnt also spin. But i have deassembled the whole thing. The wires are intact. And sometimes it spins for like 1 turn and then it stops. I think its maybe an cracked cable or sum idk do you maybe know something i dont?

@techfixPOV Год назад

First, you should check if it works normally when the fluffy bar is not mounted. Maybe it is a mechanical issue. If it still doesn't work normally, you could check both wires individually using a multimeter set to read resistance.

@l.ectric6713 Год назад

This is my problem too the roller bar /motor has power then it does like a hiccup and stops, it does this every time

@user-qr4so5fx8p Год назад

I have the same problem, all the wires are connected properly. The other brushes works great, only this one, turn half spin and stop.. 🤷‍♂️

@charrissemalabat9122 Год назад

Mine does the same, have you fixed yours yet?

@jamiebmorton 9 месяцев назад

I have the same issue. The brush spins for 1-2 seconds and stops. Pressing the power button again causes it spin again for a few seconds and stops. Sometimes it does not spin at all. The wires are connected and seem to be okay as far as I can tell. Could it be that the motor in the brush bar is the problem?

@marclevesque3464 8 месяцев назад

thanks a lot same issue here haha

@techfixPOV 8 месяцев назад

Glad it helped!

@T-rex513 5 месяцев назад

Having the same issue. .however, until the moment I saw the cable snap decided not to DIY.....leave it to service center to fix. Complicated.

@techfixPOV 4 месяца назад

Repairs like this are usually not done in service centers. Most likely they will recommend you to buy a new brush. This is also the purpose of this channel, to show how various problems can be solved to avoid the expensive complete replacement of the defective accessory.

@KrNekiiii Год назад

Where can one get the new plastic part? Thank you.

@techfixPOV Год назад

Unfortunately, this component cannot be purchased separately.

@SH-wg1cq Год назад

My dyson heads all spin backwards. It pushes dirt out in front rather than sweeps it into the vacuum. How to fix!!

@techfixPOV Год назад

what model is the vacuum cleaner?

@SH-wg1cq Год назад

@@techfixPOV V8

@techfixPOV Год назад

Watch this video I made: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BCf2DCHRWqU.html Depending on how the two wires (red and white) are connected, the brushes will rotate in one direction or another. In your case, if all the brushes rotate in the opposite direction, I recommend that you reverse the two wires. If you watch the video from the beginning, you can see the entire disassembly and assembly process. Good luck! If you have other questions, please ask.

@SH-wg1cq Год назад

@@techfixPOV omg u fixed it. ily

@techfixPOV Год назад

I'm glad it works now :)

@germankazenelson 10 месяцев назад

Why should ever I pay so much money for this dyson-p*ece of sh*t, and then fix it by myself? What is more, the battery also sucks, it does not work after one year, if I use turbo-mode. I will never ever buy Dyson.