E-Flite A-10 Thunderbolt Twin 64mm BNF UNBOX, Assembly 

I LOVE YOU PILOT RYAN!!!!

I remember back in the 80`s I was flying from Hartford to LA on business when there were 2 A-10`s in front of us taxiing, never heard of or seen one before and I was so awestruck and amazed how friggin awesome these jets are! Thank you so much once again Ryan and Bobby, you guys really have awesome videos, I`ve been a fan of Ryan and Mike for years and now of yours too Bobby! Thank you also EFlight -- AWESOME JET!!!

Missed this one by accident. Pilot Ryan and Bitgo Bobby working it like the pros they are!

Great demo, I have to say, I was totally blown away when I got the box open. Absolutely an AWESOME jet🧨

We can hear you two breathing hard over the unboxing!! That's ok! I was All goofed up too! Liked it so much I got the second version!! Thanks guys!!

Thank you for taking the time to post this very important vid on assembly and set up.

Really nice, great job Ryan and Bobby 👍

"You don't have to know why, you just have to do it!" Well said Sir! Application of this statement is limitless Regards from D.C.

I was just watching the HH release video and thinking to myself, would sure like to see how this goes together. Then BOOM, here comes the notification from Pilot Ryan with an unbox and build, nice job fellas!

Great demo on the assembly and finish with the horizontal tape covers, Jeff in LA USA

I just ordered one! can't wait!

Just got mine yesterday. Can't wait to get it flyin.

Awesome! Definitely putting in for an alert when there in stock.

Thanks Ryan I'm brand new to your channel love these E Flight jets thanks for the assembly video

That A10 is so freaking cool!!! 🔥Hey Ryan🔥, love your channel keep'em coming 👍

it's an absolutely amazing model again by eflite but we cannot afford to buy each model every time.. I wish companies would send me new models to be reviewed.. nice job Ryan & co👍🛩️✌️

excellent build. very much a video guide.

Awesome model can't wait to get one.

Awesome video.

Man that's one sweet plane

Looks great Ryan, ready for the shakedown 👍🏼👍🏼🔥🔥

Definitely better camo then the FW. Looks great 👍

Couldn’t resist dang you guys! LOL.

Really nice and the price is just right. Can't wait for the shake down. 👍👍👏👏👏

Good call on taping the connections inside the tail. No way to get to them and I have had enough nitro car battery pack connectors work loose that I now tape EVERYTHING. Nice review. I have one ordered, pretty excited to get it.

the airplane must be placed right up (not upside down) to bind it. It may be trivial to the people who are familiar with this model, but that was new to me. It took me so much time to figure this out!

😀😀😀Awsome looks Great very nice..💯💯🤙🤙

Tank you. That was the video I was waiting. How to program my jet A10 thunderbolt. On my DX6 transmiter

Nice, I didnt know E-flite was releasing a A-10

Great video Ryan! I'm going to go watch the flight videos now. I fear you've pushed to buying yet another plane. :)

Thanks to you I was able to put together my A10 Thunderbolt but. You did not teach how to program this yet on high rate. I could not program my A10 using my spectrum DX6 transmiter

Watching it right now just curious why they didnt use the new smart receiver

Sweeeet 👍

An a 10. 👍🏼

Sweet, I no longer have the only 64mm 6s A10, except mine is a star max from 2008. I'm definitely getting a set of gear, Ryan what's the length of those struts? 70 mm is the one I want still.

Is there any reason why you couldn't use foam tack instead of Ca & Kicker on this A-10? It might prove more difficult and a tad messier, but I'm talking from a bond/strength standpoint? Very Interested in this Jet from its size to the fact its 6s and has lights and is well represented in the modelling.

Does the plane come with a remote or is it sold separately

What if you have to change out a servo in the horizontal stabilizer?? I am missing something here? The horizontal stabilizer needs to be removable!

I so wanna learn how to fly those RC planes, is there a flight simulator or a plane for beginners that you recommend?

Is there space in the nose to add an fpv camera? How about a Caddx Vista?

Is there room to upgrade to a matek f7 flight controller?

DUDE 👍🏼😎✌🏼🇺🇸🇺🇸🇺🇸. I WANT ONE

Hello from Belgium! Great video , thank you! I will probably buy this jet , but I have a question to ask you . Since the rear tail is glued, we can no longer access the servos!! Thank you for your opinion...cordially

When binding a plane with retracts should I have the gear switch up?

question.... if one was wanting to repaint from the factory scheme... could you take off the existing decals fairly easy? or would you need to paint over them and redo the details?.... asking for a friend...

great video, i just ordered the e flight A 10, i have 3300 6S 50C lipos, would i be able to get at least 3-4 minutes flight time out of the a 10

Great video! Just FYI ... You are running your rudder servo wires incorrectly. You are incorrectly putting the short rudder servo wires in the slot that is intended for the vertical stabilizer spar as you are gluing it in the video. While it is probably negligible, this may create a slight "TOE OUT" on the vertical stabilizers & also makes it more difficult to change a rudder servo in the future. The horizontal stab may also not fully seat in the vertical STAB pocket with the wire in that slot:( They made a channel in each end of the horizontal STAB for the short rudder wire to make a "S'" turn before it plugs into the rudder "Y" Harness. Hope this helps:)

Hey can you connect a spektrum dxs transmitter to this plane?

How much is It coast ? In Brazil coast 3x more than in U.S.A

Does that receiver say A635B?

Finally, the A-10 I always wanted, 4 channel w/retracts and small enough (64mm) to fit in the car. PLUS it's a really well made model with good features.

You ain’t using no stunt doubles for these builds. Not with those CA crusted fingertips. Respect!! Keep up the great work!

I'd get rid of the pave penny. My LHS will be getting them after virus deal is behind us. He does mail order also. 10 minutes from my house. Enjoyed the flight.

Got one one per order !!!! They said April 15 I should have it

Hey pilot Ryan I saw a video of you flying the mig21 3 years ago on motion rc is that a nice flyer what would you compare it to? And how is the quality on it since it’s a older model

Where is the 4000 mah battery supposed to sit in the battery tray?

Great video, very informative. Man I really like this plane alot. It looks like the real thing. I'm very familiar with rc trucks and cars both electric and nitro. I have around 20 units or more.. Question, this plane in the video says very easy to fly. Would you recommend this plane to someone like me that has no experience with airplanes but like I said have experience with the cars and trucks electic and nitro? I have played with a helicopter a time or 2. Thumbs up on this video, thanks. 👍

Can this work on a 6 channel Spektrum?

Ryan ... Jim Bonito here formerly RC obsessions are you done with Motion RC ... I'll be checking you out on your channel here good to see ya Bro ... Nice A-10

is there any way i could mod this to shoot bbs or to at least make the brrrrr

Would you recommend this for someone that's only had experience with ground RC's because It Is pretty expensive I would cry If I crashed this thing 1st try?

Have you put a 6s 5000 is this?

I used magnets to attach my front radar pod thjngymabobber.

I subed to u

does it come with a remote control

Come on body. I bound and programmed my A10 thunderbird. But my safe AS3X did not activate. You as pro should explain how to. Program and switch asing fo safe AS3X. Using DX6 spectrum transmiter.

RIP eflite f18 savings

I LOVE THAT PLANE ,BUT THE DESIGNER FAIL TO ADD 2 SCREWS ON THE RUDER ASSM, IS NOT SAMART TO GLUE THE PARTS,IS A PLUG AND PLAY DEAL,IF FOR SOME REASON YO HAVE TO CORRECT SOMETING YOU HAVE TO BRAKE AWAY THE CA AND BUY PARTS ...JUST A THOUGT,..NICE VIDEO....

hard to believe this is a 6s jet for the size!

I was wondering "why the hell in this day and age is the video pixelated to hell and back, it looks like they filmed it on a cheap-ass Chinese webcam it's ridiculous!" And guess what? *RU-vid decided to play the damn video in 144p even though my phone has a 1080p screen! What the fuck RU-vid?*

Nice but Shame not like the Mustang ... the servos could be painted etc. THE horrible tape covering the wires wrong colour. AND another A10 why? There are some many cool jets they could make.

There goes my wallet. Now how am i tell my wifey....

Dude... I just realized you ripped off the Ray.Ban logo...

the video was good but the only thing which was kinda disturbing was the ASMR(Breathing)