What to expect while installing the ZS190 Zongshen 190cc horizontal honda clone engine. Step by step install!! Should be the same on the Honda Grom, except the wiring will be different of course. Major different in power and now it is a 5 speed instead of a 4. Hence the new name “HELLCOUGAR”
The swap takes 3 to 4 hours if you take your time.
Contact Dave Bullock in the “ZS190 swap” facebook group for this motor.
Follow “parkers Garage” on facebook for other Z190 videos.
The new 190cc engine gets ? mpg
54 miles per gallon with the old 125cc engine Off roading, I was impressed!
It doesn't have to be fast to be fun, Create your own adventures
Current video links:
Adjustable intake: amzn.to/2yoWxqb
Nibi 26mm carb: amzn.to/2WbIQ74
Mikuni 26mm carb amzn.to/2WJmhFU
intake adapter swing plate: amzn.to/3drWVTp
It goes pretty good for a 125cc bike (55 mph after tune), suspension is nice, braking is good. 0-50 mph in 19 seconds
Links:
I get my bikes from Txpowersports.com use MOTOCHEEZ at checkout for a discount bit.ly/3asOO81
Shinko Offroad DOT Grom tire set: ebay.to/3dKIoDB
Jet kit: amzn.to/2Qf8PrJ
Frame bolts: The ones on a bike or metric but 5/16-18 or 24 (preferred) 5" long will work. I'd get grade 8, Grade 5 minimum. (ebay.to/2zdtG8a Grade 8) (ebay.to/2L5sCWq Grade 5)
I think it would be an awesome around town or city bike. Just like the clone it is not very fast
Available in Red, White and Blue!
PROS:
Honda clone horizontal 125cc engine
CONS:
no kickstart, Electric only
Specs: (most from Txpowersports website)
HELLCAT 125 ENGINE:
Engine Size: 124cc
Type: Electric start
Transmission: 4 speed manual with clutch
Drive: Chain drive
Cooling: Air Cooled
Ignition: CDI
Fuel Tank Capacity: 1.5 Gallons (5.5 L)
Top Speed: 54 mph (After Mods)
Horsepower: 12 (estimated)
Spark Plug Type /
Gap: A7RTC / 0.6~0.7 mm
Battery: 12V 7Ah (Included)
CHASSIS:
Front Brakes: Hydraulic Disc (Hand)
Rear Brakes: Hydraulic Disc (Foot)
Front Rim: 2.75 x 12 Alloy rim
Front Tires: 120 / 70 - 12
Rear Rim: 3.5 x 12 Alloy rim Rear
Tires: 120 / 70 - 12
Front Suspension: Dual inverted forks
Rear Suspension: Single shock absorber
Ground Clearance: 4.3 Inches (110 mm)
Seat Height: 30 Inches (760 mm)
Wheelbase: 49 Inches (1250 mm)
DIMENSION:
Overall Dimension:
70 x 30 x 39 Inches (1790 x 750 x 995 mm)
Carton Dimension: 64 x 22 x 32 Inches (1620 x 565 x 810 mm)
N.W.: 207 LBS (94 Kgs)
Watch us Unbox, assemble and review this bike with my opinions on it along the way, good and bad. I make these videos so you know what to expect when you purchase one of these Chinese bikes, I keep it 100% honest with what I find. Assembly is about 1 hour.
------------------------------------------------------------------------------------------
Like my videos? Links below, be sure to like and follow please :)
TaoTao Playlist:
DLX Hawk Playlist:
Go to www.motocheez.com for most up to date discounted links.
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
Custom intro music and Voice-overs by Harp C Chord, Ryan Harper.
Audio clips:
Movie clips: Stepbrothers. The office. Me myself and Irene.
Memes: Biden sniffer
26 июн 2024
