E39 Auxiliary Fan on Amazon: amzn.to/2IQ60b3 E39 Auxiliary Fan on eBay: ebay.to/31HUNC8 Video Quick Short Cuts: 0:00 Front Bumper Removal 3:29 Fan Shroud Removal 8:24 Fan Failure and AC Problems 8:57 Removing the Old Fan 10:18 Installing the New Fan 12:00 Reassembling the Shroud and Bumper
Great video man! I like the simplicity and clear instruction of how to complete this without any extra non relevant commentary that other you tubers tend to add. I’ll be attempting this today. Thanks!
Very good instructional video. Just did this replacement on my e39. However, the e39 bumper in this video doesn't have headlight washers. But easy enough to handle. But with these models being 20yrs old now, my washer fluid supply line was so brittle it disintegrated. If you have the headlight washers, plan on an extra hour and +$100 to replace that system while you're in there.
This was a fantastic video. Instructions were excellent. I want to share a development that I experienced and viewers should be aware of since the e39 is getting older and corrosion sets in. The two 13m nuts holding the fan auxiliary on passenger side could become a problem (9:00-9:15). The bolt that these nuts fastened onto are not set and begin turning. There is no access to get to the bolt head. It wouldn't matter anyway as they are flat and round. I have no idea why these bolts are not welded to the frame. Long story short, I had to saw off the nut after failing to use an extractor. My bolts are still long enough to rest the new auxiliary fan in place but I need to figure something out to secure secure it. It is a total PITA , everything was going so smooth too. Driver side nuts were not problem. I believe this happen because this side is susceptible to anti-freeze getting all over place when bleeding the system.
Thanks for the video I used it today to replace my auxiliary fan on my 03 525 msport. Unfortunately for me I couldn't get the last of the 4 nuts off the lower left bolt. The bolt and nut were so rusted and the bolt just kept spinning when I tried turning the nut. I had to cut the nut off. I probably need to pull the whole radiator out to replace that bolt as there's just not enough room to get that bolt out.. Ugh. For now, I just zip tied the lower left side as the remaining bolt is too short now to put a new nut on it. Great video though!
Hey there! I’m seeing this video is 11 months old, was just wondering if the fan is still running strong? The one in your link is significantly cheaper than all the other brands and I’d love to save a hundred bucks if the part is still reliable
Great video and tutorial. Does your auxiliary fan come on when driving or sitting at idle? Mine only comes on when I use the conditioner. Also your Amazon link says Currently unavailable.
very helpful and i loved the video! Though I was wondering if I needed a new fan when my fan is weak causing the car to overheat and theres a leak through the cooling system. Do you any advice on a beginner regarding this issue? :) Thank you!
Hey! This is exactly what is happening to me RN lol, first the coolant tank popped so I replaced it only to find out the fan wasn't spinning at all so I'm replacing it thanks to this video!
Arianna Lerdo just got my first proper diagnosis for my car and it turns out it’s a problem in the engine (valve hitting, need new gaskets, etc). Glad you got yours figured out! Drive safe 🙌🏽
Great video. Just watched this . It’s 2022 and I need to replace the aux fan on my wife’s 2001 525I. Question? Those plastic pop rivets you removed on the top.. can they be used again? If not do you know what size they are? How many did you buy and where. Going to attempt this repair but I want to have everything I need beforehand. Thanks so much for a reply and your help. Also anyone else in the know with an answer would be greatly appreciated. Thanks! JR
I typically show one repair at a time so they can be used individually as a guide or overview. Check out my fan clutch test video here (on an e39): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fqnvOYwfxbU.htmlsi=iHMkj1yZpXSPiFuf
Can you help me please. That “snorkel piece”, what is its actual name, eventual part number? Checked realOem, and my local supplier can’t seem to find just that part! Had it at a mechanic that has lost one bolt, and broken the item and the seal😞. 4:18 to 4:28
Hello today I forgot a socket in the front and dropped inside and fan destroyed it and a hizzing noise was loud like something leaking but not actual fluid u think I messed up the condenser??
I like to keep my cars in factory condition so I probably wouldn't be too interested in doing that kind of conversion to be honest. It does sound interesting though, thanks
Hi I have a problem in my car BMW E39 electronic fan front does not shut down continuously even when the engine is fully extinguished Is anyone help me and thank you
Yes it can overheat. Especially if the fan clutch has also failed and the car idles in hot ambient temps. The fan has dual purpose, AC cooling but also kicks on if it hits higher temps.
How weak can it really be though. My 2001 525i is 18 years old with 240,000 miles on it and still going strong. The aluminum saves weight. There are other materials used in later models, magnesium etc!