EASILY Braze, Steel, Iron, Brass, Bronze, Or Copper

Подписаться 604 тыс.

Просмотров 479 тыс.

50% 1

Learn how to easily braze steel, iron, brass, bronze, or copper using the supplies shown in this video that yield excellent results! You'll be able to make many repairs, and save a lot of money. Enjoy the video!
Hot Max Brazing Flux: amzn.to/2oM2UfB
Bronze Brazing Rods: amzn.to/2Dbyqh7
Harris Stay-Silv Brazing Rods: amzn.to/3kiGRYH
(Amazon Affiliate Links)
Thanks For Watching!
Support the creation of more electronicsNmore videos at the link below:
www.paypal.me/electronicsNmoreYT
**If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a "THUMBS UP", and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)**

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 352

@cruiser97eric1 5 лет назад

The second side of the steel ring was harder to braze because it was covered by a layer of black oxide that formed while brazing the first side. To prevent that I would have put some flux on both sides before I started heating anything. The flux will protect the metal from oxidation caused by the heating. It is better to prevent the oxide from forming in the first place, instead of having to wait for the oxide to be removed by flux applied after the metal was already very hot.

@Finchcustomputters 3 года назад

Yes apply flux to the part as well that’s what I was taught

@keithosborne6585 11 месяцев назад

Flux would help although a reducing flame should be able to remove the oxidation during heating.

@shawnkittle5406 8 месяцев назад

Yea wat he said!!!😂😂😂

@poochihuku3701 7 месяцев назад

Only halfway through this video and I am so happy to have found this. You give all the most important tips and are clearing up a lot of my confusion. Also because the flame of your torch is mostly invisible here i am finally getting to see the behaviour of the braze pool in great detail. This the perfect video for anyone looking to get into brazing! Thank you!

@keithgeisen Год назад

Thank you for the up-load. I am starting a small hobby and I was thinking I needed a welder to build a small form, but I will give this a try. Thanks again!

@tinytonymaloney7832 3 года назад

I haven't done mild steel brazing since 1980 at college. I recall that word Borax, like Vim, a white powder. I need to braze a mild steel bolt to a mild steel plate for a metal chair repair. I looked on Amazon but it is not obvious what rods I need neither what flux I need. There is only a large tub for £35 which is a bit excessive for one braze. What I like about brazing is that you tend not to blow away the metal like you can arc welding or MIG or TIG, all of which I am not to good at. Good straightforward and explanitory video. Well done.

@augiemattheiss 5 лет назад

Excellent, thank you! Love brazing, strong as hell... sometimes have contamination or flux issues that cause brazing material to "ball up"... always trying to improve my skills. I have some silver loaded brazing rods, will try the recommended flux.

@electronicsNmore 5 лет назад

Thanks for watching Augie! Be sure to watch my aluminum brazing videos below, and share my channel with many others. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3SBfP4_i1Go.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CCycms8wVC4.html

@johnprato6494 8 лет назад

You do a great job- very clear articulation, explanation, and appropriate brevity. I appreciated the focus on the material at hand and your economy of words. I believe I will now go downstairs and braze for the first time with a pretty full understanding of everything you did in your video, which I'm more or less replicating. I like that you didn't have obscured activities taking place out of the eyesight of the camera, and that ultimately, I don't need to watch ANOTHER 10 videos to get second opinions. So, having watched numerous DIY videos- I give kudos to you as being fantastic at this. You also inspire confidence with your tone. I rarely review anything, but felt compelled to say this. I'll check back in an hour with results of the mission.

@spongebob50034 7 лет назад

Just a tip. For that piece he was focusing more on the rim instead of the bottoms base plate. You notice the filler is balling a little bit. Need to apply a bit more heat to the base not the filler

@tonio909 6 лет назад

You took the words right out of my mouth. No senseless intro, just straight to the point. This is a great example of how information should be shared on RU-vid, I was able to braze for my first time as well after watching this.

@bazlebreeze9938 3 года назад

Yep, what Prato said.

@cornfusedatbest6693 7 лет назад

Refreshing to see posts and comments coming from those that have a "clue" on the subject. YT is a great tool to have, IF, .. you have just a little common sense. Thanx for posting, everybody.

@saltmummy626 3 года назад

Thank you. You're video is clear, concise, and informative.

@electronicsNmore 3 года назад

You're welcome! Thanks for the nice comment. Be sure to rate thumbs up, consider subscribing, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. ru-vid.complaylists

@victoryfirst2878 2 года назад

Nicely done fella. I used your channel to refresh my memory for a smooth and strong joint.

@PigeonDesign 3 года назад

Extremely helpful. Thank you!

@electronicsNmore 3 года назад

Glad it was helpful! Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you, and stay safe! ru-vid.complaylists

@thomasdemetrius39 5 лет назад

Excellence video great demonstration and explanation , this video gave me confidence and proper information to now do the job myself thankyou

@electronicsNmore 5 лет назад

Thanks for watching Demetrius! Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3SBfP4_i1Go.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CCycms8wVC4.html

@andre-michelgoulet6933 2 года назад

Very thorough explanation and excellent demonstration, thanks much mate!

@electronicsNmore 2 года назад

Glad you enjoyed it Andre! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thank you ru-vid.complaylists

@Vhbaske 8 лет назад

Very nice! Metal is a very precious thing to work with.

@electronicsNmore 8 лет назад

+Pedro Vazquez Thanks for watching Pedro! Please share my videos with others.

@nicktran939 3 года назад

Thanks so much! I have used stay silver 6 for hvac copper all the time. I Couldn't get it to braze steel before. I will try the hot max

@electronicsNmore 3 года назад

Glad I could help! It's good stuff Nick. Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No additional cost to you), and most importantly take one minute to share links to my videos with others on social networking sites. Thank you! ru-vid.complaylists

@GrahamSchroder 3 года назад

Thank you, I think I'm ready to get my brave on and have a go. Thanks heaps.

@electronicsNmore 3 года назад

You can do it. Practice makes perfect. Thanks for watching! Be sure to rate thumbs up and share.

@pikifrino 5 лет назад

Very good! Thank u 4 sharing

@electronicsNmore 5 лет назад

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You

@gregoryvpencheff3091 2 года назад

An excellent tutorial. Thanks!

@electronicsNmore 2 года назад

Glad you enjoyed it Greg! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you ru-vid.complaylists

@DiamondR0GUEnz 5 лет назад

Awesome got it, jst what I was looking for...

@electronicsNmore 5 лет назад

Great to hear! Be sure to watch my other great videos(especially my brazing videos below), and most importantly share my videos with many others. Thank you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CCycms8wVC4.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3SBfP4_i1Go.html

@damocash1980 5 лет назад

Thanks for making this video, I'm a welder and my boss has asked me to braze some brass at work tomorrow and I haven't done it since I was at school nearly 2 decades ago. I found your video very informative and clear. After watching it I'm no longer nervous about messing up the bosses fancy brass door handle tomorrow.

@electronicsNmore 5 лет назад

@ARCSTREAMS 10 месяцев назад

how did it turn out?

@anthonycesario4056 3 года назад

Good video. Very helpful. Thank you.

@electronicsNmore 3 года назад

Glad you enjoyed it!

@pcdoodle1 Год назад

Gotta love a no bullshit, right to the point video in 2022.

@marcinkoscielny1481 Год назад

This is the best video on brazing that I found so far.

@electronicsNmore Год назад

Great to hear!

@elitecmdrjake 3 года назад

Great video faceless man. Learnt a lot and eager to get to my workshop and try my hand. Thanks again. (Australia)

@electronicsNmore 3 года назад

Glad you enjoyed it! Thanks for watching

@sandipnepali8043 5 лет назад

Really nice work

@electronicsNmore 5 лет назад

Thanks Sandip! Be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others. Thank you! ru-vid.complaylists

@Rudimentary007 3 года назад

Just learned something new👍.

@electronicsNmore 3 года назад

Glad to hear Frank! There's plenty to learn on my channel. Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks ru-vid.complaylists

@HowlinWilf13 5 лет назад

Thanks for the vid. Glad to your vice was made in England!

@electronicsNmore 5 лет назад

You're welcome! When we purchased the home from Canadians, it was there. Be sure to look over my extensive video playlists for other great videos of interest to you , rate thumbs up, subscribe, and most importantly share. Thank you!

@jcims 9 лет назад

Nicely done, you've got a knack for explaining this stuff and demonstrating it clearly! Watching that puddle flatten reminds me of watching my old man brazing copper for HVAC. The first time I saw the blob of brazing material get sucked into the joint when it hit temp, it was like magic. Took me a long time to figure out those copper pipes were sucking heat out of the joint almost as fast as the flame was dumping it in...no time for lollygagging, lol. I'd hate to see what kind of jabba the hut joint i'd do these days. :)

@electronicsNmore 9 лет назад

jcims Glad you enjoyed the video. I have brazed many copper A/C refrigeration lines over the years. :-)

@kennethcrowe300 Год назад

do you think its a good idea to braze on wood

@TalmadgesArcade 3 года назад

Thank you

@electronicsNmore 3 года назад

You're welcome

@designertjp-utube 3 года назад

Wonderful Instructional Brazing Video! Always wondered why even *7* *year* *olds* are able to do #Steampunk Cosplay so easily, with all the metal attach stuff. Now I feel more _"confident"_ to enter this Steam Environment Costume World myself, Thanks to your superb tutorial! #DesignerTJP

@shawnkittle5406 8 месяцев назад

Awsome vid man!!!

@watkinsme4629 4 года назад

Hey thanks a lot very informative 🤙

@electronicsNmore 4 года назад

Glad you really enjoyed the video! Be sure to share my channel with others, and look over my extensive video playlists below for many other videos of interest to you. Thank you ru-vid.complaylists

@brplatten1273 3 года назад

Thanks been trying a video that would show me how to do this I'm glad it was in English also again thanks for the video

@electronicsNmore 3 года назад

You're very welcome!

@maplehouseknives 8 лет назад

Great vid!

@electronicsNmore 8 лет назад

+Maplehouse Knives and Bushcraft Glad you enjoyed it! Be sure to check out my video playlists, share my channel with others, and rate thumbs up. Thank you.

@mitch5699 3 года назад

Thanks so much man, I welded /brazed for years but never thought, I'd need to one day braze forks and spoons for a project, what's the ideal rods,flux, and & heat for run of the mill flatware. .thanks again ! yer the man !

@electronicsNmore 3 года назад

You're welcome Mitch! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you ru-vid.complaylists

@Scrap5000 6 лет назад

Awesome video!

@electronicsNmore 6 лет назад

Glad you enjoyed it! Be sure to check out my extensive video playlists for other great videos of interest to you, rate thumbs up, and share. Thanks

@skyym3629 7 лет назад

Thank you for the information and demonstration. Thumbs up.

@electronicsNmore 7 лет назад

You're welcome! Be sure to check out my video playlists, rate thumbs up, and share with friends. Thank You

@skyym3629 7 лет назад

electronicsNmore ..... Will do. Thanks again.

@jesusyeshuaelelyonelshadai6295 6 лет назад

Very good video👍👍👍👍 very informative

@electronicsNmore 6 лет назад

Thank you! Be sure to rate thumbs up, check out my extensive video playlists, and share my channel with others.

@petemoss9693 8 лет назад

Having a fire brick handy will be a good substitute instead of a damp piece of wood, welding requires a very good ground also a good surface for welding to complete the circuit . I have used the Hot Max using silver solder brazing rods it works well . Good video -

@electronicsNmore 8 лет назад

+Pete Moss Thanks. You're correct. A fire brick would be great, but I live on an island in the Bahamas. We don't have any here. :-)

@petemoss9693 8 лет назад

LOL . . . . I'll send you a few !!!

@ken4059 5 лет назад

Circuit ?? Are we watching the same video ? Or are you just a moron ?

@johnmacmillan627 2 года назад

Very helpful. Thx

@electronicsNmore 2 года назад

Glad it helped John! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks ru-vid.complaylists

@tonyb337 5 лет назад

Good video

@electronicsNmore 5 лет назад

@Marine-iu3ev Год назад

Very good video A+

@diyhvac1028 10 месяцев назад

Ekshrtremely interesting!

@craigcageriot5504 6 месяцев назад

Outstanding video!!!

@electronicsNmore 6 месяцев назад

Glad you enjoyed the video Craig! Be sure to check out my video playlists as well and share. Thank you

@sportsworld1701 6 лет назад

I am doing gas welding on joints of copper and brass .please tell me which material rod we should use to join

@UneasiestDaisy 9 лет назад

I already knew how to do this but for some reason I couldn't help to watch the whole thing.(mostly because your very informative)

@electronicsNmore 9 лет назад

Uneasiest Daisy Thank You! Please share with others

@bobbowie5334 6 лет назад

Love this video.

@electronicsNmore 6 лет назад

Great to hear! Be sure to check out my extensive video playlists for other great videos of interest to you, rate thumbs up, and share.

@richardtrowell8812 2 года назад

Would firebrick work to prevent damage to surfaces such as concrete in video? Am looking at repairing the seats on metal chairs. The wire screening has come loose and thought brazing would be a good repair since everything is attached on underside. What did would you recommend?

@peterfowden9118 Год назад

Hi ..just wondering what brazing rods and flux you are using there for mild steel

@malakademon977 4 года назад

I love you man, great vid. Happy Hanukkah

@electronicsNmore 4 года назад

Glad you enjoyed the video. Happy Holidays!

@FreeYourBrains 6 месяцев назад

it is actually better to place the work pieces over a gas burner, this way you get a lot of help because the gas burner will maintain the work pieces at a high temp eliminating the heat sink effect, I have done it on thick copper and steel and works wonders

@aceryeo8409 3 года назад

I have a wood stove with serious pitting due to rust fissure forming under kettle. What is the best way to get the brazing material into the dirty fissure without drilling out all the fissures?

@tuckerc3802 Год назад

That rod you used how does it look if you buff it I'm needing to braze or weld brass clothing racks together and polish after and they have to look great the filler needs to look like the brass or very close im trying to find the best looking way possible I'm fine with tig welding but the brazing looks better

@londonjacks8371 3 года назад

That’s a good old English made vice you have. 👍

@electronicsNmore 3 года назад

Had! LOL I moved and left it there.

@umakantgajjewar8898 2 года назад

This is how a DIY video should be like. Very good explanation of the all aspects of the job, like materials, temp, cleaning etc. Also, I would like to know if the same method can be used to join brass with mild steel/steel ? -Thanks a lot !

@electronicsNmore 2 года назад

Thank you very much!

@sarfazzsyousaf9084 2 года назад

Stainless steel?

@jamesfranklin5713 9 лет назад

Thanks for the great lesson I'm a self taught metal artist is the flux for brazing necessary or just helpful Most of the stuff I braz is not load barring

@electronicsNmore 9 лет назад

James Franklin No flux necessary for copper/brass/bronze, but mandatory for steel/cast iron. Thanks For Watching

@kocnn 6 лет назад

electronicsNmore, what about stainless, Also can propane be used? Great video, Thank you for posting this.

@pepucarrasco6991 5 лет назад

Man great video. You explained everything the way I needed to learn what I needed. I'll subscribe. I'm looking forward to weld bikes and brazing is a must skill That a need to know. I been watching hours of videos about brazing and this was one of the best

@electronicsNmore 5 лет назад

Great to hear Ignacio! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly share my channel with others. Thanks ru-vid.complaylists

@ianviljoen9036 5 лет назад

This video is extremely good!

@electronicsNmore 5 лет назад

Thanks Ian! I have many videos that cover a wide range of subjects, so be sure to look over my extensive video playlists below and most importantly share my channel with many others. ru-vid.complaylists

@d.rrefrigerationservicese5365 2 года назад

Does it work with silver solder brazing copper to steel ?

@Liberallez 3 года назад

Good Stuff...as opposed to some others who just yammer!!!

@electronicsNmore 3 года назад

Thanks! Be sure to check out my very wide range of videos and share.

@mufuliramark 3 года назад

Never done anything like this before and I’m contemplating fixing the aluminium base of a bar stool where the bracket underneath that holds the seat suspension mount in place has cracked so the seat is very wobbly and unusable. Do you think it’s possible for me to tackle this job myself. I’m an experience DIY’er who is not a mechanic but does a lot of tinkering. You’re video is full of pertinent information and tips giving me confidence to try.

@electronicsNmore 3 года назад

Nothing to lose. Practice on a piece of scrap first. Thanks for watching!

@JaimeMartinez-hd2dk 2 года назад

Thank you for your video, very helpful. What type of brazing rod I need to braze broken brass? Thank you

@electronicsNmore 2 года назад

You're welcome. The link below is what you need. Thanks for watching! amzn.to/3DSqlZ9 (Amazon Affiliate Link)

@websurfer1585 3 года назад

Helpful video, thanks. How strong is a brazed joint compared to a weld?

@electronicsNmore 3 года назад

Great to hear! Very strong when done properly, but of course welding is the strongest method. Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks ru-vid.complaylists

@steveboone5480 3 года назад

My daddy always told me to get my wood good and wet!

@Mike-H_UK 7 месяцев назад

Maybe an obvious question but I am new to this... How do you hold the brazing rod? Bare hands, gloves, mulgrips etc? I would imagine it could get hot, but maybe it is like solder where it melts before the heat conducts down.

@nemodivermalaysia Месяц назад

How to join ss to ss? What kind of rod and flux is the best choice?

@naoufelmelayh240 4 года назад

hi sir thanks for video , need tuto braze metal galvanized and sometime stainless steel , please to help and advise about rod filler , is it silver or silver bronze alloy , any refs and flux with thanks

@electronicsNmore 4 года назад

Hello. You can use what's shown at the affiliate link below. Thanks for watching! amzn.to/2EsAmia

@jamesbarisitz4794 Год назад

Buy a couple of fire bricks. One for a base, the second as backstop and heat reflector. ✌

@RAWRMotorsports 3 года назад

Subed

@electronicsNmore 3 года назад

Great to hear! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you ru-vid.complaylists

@omarshuja 3 года назад

Very informative video. Can the same materials be used for Stainless Steel brazing? Thanks

@electronicsNmore 3 года назад

No, you cannot use the same rods.

@4dirt2racer0 3 года назад

the cleanliness of the surface can b critical for even mig welding, if ur usin flux core then u the weld is extremely sensitive any contamination, u can get nice welds with flux core i even have a bottle of denatured alcohol i wipe stuff down with before i weld before i use flux core all the time its jus way more convenient n welds fine for most things, n for what doesnt u simply plug a bottle in but at the very absolute least u should really wire brush the surface n spray it real quick with brakleen it only takes literally a few seconds n makes ur welds look alot better n for sure alot stronger without contamination

@electronicsNmore 3 года назад

I usually wire brush the area before working if I want a very nice looking job. Thanks for watching!

@mufuliramark 2 года назад

Complete novice here, the weld on the bottom of my barstools are coming off, what’s the best method and equipment to try and save them

@ronaldgoodall7320 7 лет назад

Can you do demo on bending brass plate? I have some brass 150mm long x 38mm wide x 3.5 mm thick. I want to bend this at 90 degrees. Cheers RG from downunder.

@tapkius99 7 лет назад

Not sure if you done it already , but the way i did it was cut a 2mm deep line on my sheet (5mm thick) using an angle grinder, then i fix it with clamps and bend with my hands , around 20 degrees . Then i heat treated it using a quick made forge with hairdryer supplying air for gigher temps . Repeat bend- heattreat until you are done, just be patient and dont bend too much at a time or you will risk metal cracking.

@charliebrown6512 4 года назад

Serious question: does the popping up of concrete have enough velocity to knock over the work pieces(s) potentially causing burns to skin or starting a fire??

@electronicsNmore 4 года назад

It's known as "Spalling", and the pieces that "may" pop off the surface are generally small. All depends on the moisture content of the concrete. Thanks for watching!

@richardschaeffer3204 11 месяцев назад

Great video, ez to understand. I have a great old bbq and the 2pc legs (assembled together) are 2inch tube steel about 1mm thick. And afraid of burning through it trying to make them 1pc. Is this too thin? Or will the inner piece heat up enough? Advise? Thanks.

@electronicsNmore 11 месяцев назад

Ideal for thin metal

@bitsurfer0101 6 лет назад

Is it a pretty strong bond when you braze vs weld? I wanted to make a wing for my car.

@electronicsNmore 6 лет назад

CDNBaconRich Very strong, but not as strong as welding.

@hikerJohn 3 года назад

I welded broken small flat stock steel together on a lawnmower catcher twice (40 years ago) and it kept braking due to vibration but then I brazed it together and it never broke again.

@electronicsNmore 3 года назад

Brazing works extremely well when the right rod is used, I guess you used the typical bronze rod. Thanks for watching John! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. ru-vid.complaylists

@simonsimpson4695 4 года назад

Could brazing be used to join tin cans to make a stove flue? If the first part above the fire box is a proper steel pipe? I was thinking of using Tuna tins, as I collected a shed-load. See anything with "Made in the USA" it's going to be good quality. I got a Speed Square from Amazon. Perfect. It's in inches though. I can't work fractions. Notably it's why we were tought fractions at school. It didn't sink in. MMs are better. Re-use not Recycle.

@electronicsNmore 4 года назад

The tin cans are really tin plated steel, so yes.

@sportsworld1701 6 лет назад

I want to do joint copper and brass with the help of gas welding please tell me right materil of rod which i should use as a welding material ?

@electronicsNmore 6 лет назад

Harris stay-silv 5 or 15.

@Uftonwood2 5 лет назад

You’re holding the gas torch too close to the work: heat is generated as the gas burns, the flame will be at its hottest towards the end of the flame. Had you applied flux to the bed and the piece and introduced the brazing rod inside, at the base of the piece, the braze would have run round the entire ring, making a stronger joint using less braze metal.

@allenhonaker4107 4 года назад

Futon I totally agree. Branded joints should be treated like soldered joints because brazing is high temperature hard solder. The joints should be thoroughly cleaned and fluxes immediately to avoid oxidation

@usernamemykel 9 месяцев назад

Yes, any dampness in the concrete will want to escape when heated - that's why experienced/knowledgeable outdoorsmen don't ever use river rocks to line campfires - or BOOM!

@ARCSTREAMS 4 года назад

sure takes a long while ,guess you must be using propane/air torch,,nice thing is the other side is not melting but it takes lot of heat to flow cooper rods

@electronicsNmore 4 года назад

You need high temperature to melt the brazing rod, unlike soldering. Be sure to look over my extensive video playlists below for many other videos of interest to you, and share. Thanks for watching! ru-vid.complaylists

@Bmanfresh 4 года назад

So is it like solder in the way if you are heating up next to the previous solder point the one thats done is going to reheat and fall apart?

@electronicsNmore 4 года назад

As you move away, the area you just did cools.

@diesalweasel 8 лет назад

hi nice job. what safety Google would you recommend may I ask I use to braze at high school around 20 year ago . I have some low melting point aluminium rods coming as well

@electronicsNmore 8 лет назад

+James Birkin If you're only using propane/Mapp gas, then only clear safety goggles.

@diesalweasel 8 лет назад

thank you :-)

@Evan-jp3zw 6 лет назад

Hi great video; could you use a soldering iron for the flame?

@electronicsNmore 6 лет назад

No, you must use a propane or MAPP gas torch. Thanks for watching! Be sure to check out my extensive video playlists for other great videos of interest to you, rate thumbs up, and share my channel with all your friends.

@Evan-jp3zw 6 лет назад

ok thanks for reply , i will check out your playlists , like , share.:)

@dhduncan 3 года назад

Would this be the same technique for brazing copper to copper? Thanks

@electronicsNmore 3 года назад

Hi Heather. Yes, when I did HVAC work, I used Harris stay-silv 5 and 15 to braze copper tubing. Clean the copper with 400 grit abrasive paper until it's bright and shiny, no flux required. I should have links in the video description area. Thanks for watching!

@djrocker1007 5 лет назад

Great video! Thank you. Will Stay Silv 5 work the same for steel?

@electronicsNmore 5 лет назад

Hi there! Yes, but I'd use Harris Stay-Silv white flux with the rod. I have many great videos on my channel that cover a wide range of subjects unlike the majority of channels on RU-vid, so be sure to look over my extensive video playlists for other videos of interest to you, and most importantly share my channel with many others. Thank you!

@djrocker1007 5 лет назад

@@electronicsNmore Thank you Sir!!

@whysurvivewhenyoucanthrive7592 4 года назад

Can I use the silv 15 for aluminum to brass

@electronicsNmore 4 года назад

@alistairkinnear8737 5 лет назад

I want to braze 20 gauge brass sheet. will this approach work. I made a prototype with solder and found the edges popped off under minor load.

@electronicsNmore 5 лет назад

Hello, Yes, the Harris Stay-Silv brazing rods are perfect for copper and brass. Be sure to look over my extensive video playlists below for other great videos of interest to you, and most importantly share my channel with many others. Thanks! ru-vid.complaylists

@billpatton7683 3 года назад

I'm new to welding/brazing. Just trying to spot weld/braze tin blades back to frame on a yard whirligig. But not sure what to order. What is difference of stay silv 5, 6, or 15?

@electronicsNmore 3 года назад

For tin, you solder. The melting point is too low to braze. Use an acid flux and solid solder wire.

@PeakyBlinder 3 года назад

Can you not use a fireproof mat like a welding mat under the aluminium.

@jasonyong8372 4 года назад

To all the pros here, I am a beginner in brazing. I have been wonder what will happen to the brazing joint after a certain of time exposed to the environment? I used a copper-based brazing alloy as the filler metal to join two pieces of carbon steel plate. What is the possible failure that may occur on the brazed plate?

@electronicsNmore 4 года назад

Anything is possible. How well you did the job is the most important factor.

@Jonmc511 4 года назад

Can Romex Wire be strong enough to use as a brazing rod? To reweld the top of the cr-mo frame that was cut off and repositioned?

@electronicsNmore 4 года назад

Pure copper isn't strong enough.

@Jonmc511 4 года назад

@@electronicsNmore thanks your quick reply. Save me from doing something then I shouldn't have.

@hafizulizham8692 5 лет назад

Hello sir...what the different of cooper and brass?

@electronicsNmore 5 лет назад

Brass is an alloy of copper and zinc.

@vivekzankar4702 Месяц назад

How you braze silver strip to copper where silver strip is 0.3 mm thk and copper base is 12 mm thk. How to avoid softening of bend section in copper carrier post brazing Akshay

@CaudillPat 8 лет назад

How does "Silver Brazing" differ from brazing the metals you used in this video? Thanks.

@electronicsNmore 8 лет назад

+Pat Caudill Adding silver makes the brazed or soldered joint stronger.

@CaudillPat 8 лет назад

+electronicsNmore Thanks! I'm trying to figure out how to "weld" old keys together. I'm learning that it may be easier to silver solder them. It seems as though having a good flux and taking my time in heating up the base and to be sure my flux is back into a watery appearance and I should be good to go.

@Lanninglongarmmowing 9 лет назад

Great video!! The braze looks like a weld to me. Lol. If you hadn't told me that it was brazed I wouldn't have known. I never knew you could braze steel or other metals. All I've ever seen is aluminum. Do you think brazing is better than welding for putting together thinner metals?

@electronicsNmore 9 лет назад

Love2boat92 Hello again! Brazing is the next best thing after welding, but for thinner metals I would recommend brazing. Thanks For Watching!

@Lanninglongarmmowing 9 лет назад

electronicsNmore Hey. Lol. Yeah I worry about warping thinner metal though. No problem.