Тёмный

EASY DIY Custom Display Case Part 4 - Garage Shelf Build 

Pop Culture Living Room
Подписаться 6 тыс.
Просмотров 15 тыс.
50% 1

Upgrade your garage shelf display with adjustable floating shelves made from aluminum and acrylic or wood.
Hanging Display Case Video - • DIY Custom Display Cas...
---------------------------
Disclaimer: This video is not sponsored and some of the links below are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. This helps me bring you the tutorials you love.
---------------------------------------
𝗙𝗶𝗹𝗹 𝗨𝗽 𝗬𝗼𝘂𝗿 𝗗𝗶𝘀𝗽𝗹𝗮𝘆 𝗡𝗲𝘄 𝗖𝗮𝘀𝗲: 𝗛𝗼𝘁 𝗧𝗼𝘆𝘀 𝗮𝘁 𝗦𝗶𝗱𝗲𝘀𝗵𝗼𝘄 𝗰𝗼𝗹𝗹𝗲𝗰𝘁𝗶𝗯𝗹𝗲: 👉Shrsl.Com/360h7
𝗔𝗹𝗹 𝗦𝗶𝗱𝗲𝘀𝗵𝗼𝘄 𝗖𝗼𝗹𝗹𝗲𝗰𝘁𝗶𝗯𝗹𝗲𝘀: 👉Shareasale.Com...
---------------------------------------
MATERIALS
Edsal Style Garage Shelf:
24 x 48 x 72 - amzn.to/3yApzON
18 x 48 x 72 - amzn.to/3ZUCoiK
Hanging Bracket:
1020 Aluminum Extrusion - www.framingtec...
4.2 Metric Drill Bit - amzn.to/3Lh07FN
M5 Drill Tap - amzn.to/3yC1Ttm
Cutting Fluid - amzn.to/3QjRx93
Tapping a screw Hole Video: • Blind Joint Basics
Painting your Hanging Bracket Video: • Painting Aluminum with...
Self Etching Primer - amzn.to/404t3Vz
Black Matte Paint - amzn.to/3ZZ7KoZ
Frame:
2020 V Slot Aluminum Extrusion - ooznest.co.uk/...
**For the smaller pieces of aluminum (153mm and 305mm), you will need to tap the ends so that a screw can be screwed in**
M5 x 10mm Button Head Bolt - amzn.to/3T9vWSQ
M5 x 10mm x 1mm Washer - amzn.to/3YHt80s
3/16 Drill Bit - amzn.to/3JAiVhP
Drill Jig - www.thingivers...
Cutting Fluid - amzn.to/3QjRx93
Acrylic:
3/16” Clear Acrylic - Buy Local
M5 x 10mm Button Head Bolt - amzn.to/3T9vWSQ
Spring Loaded T-Nuts - amzn.to/3JDE0Iw
7/32 Drill Bit - amzn.to/3JAiVhP
Putting It All Together:
T-Brackets - amzn.to/3yzx0Wx
Spring Loaded T-Nuts - amzn.to/3JDE0Iw
M5 x 6mm Flat Head Bolts - amzn.to/3mN0U74
M5 x 20mm x 1mm Washers - amzn.to/3FjXXS6
Tools used:
Ruler - amzn.to/3vIjT4n
Center Punch - amzn.to/3d9R4rh Drill -
Hammer - amzn.to/3zAmDlA
Drill (this drill has everything you need) - amzn.to/3Su37Qg
Allen Key Wrench - amzn.to/3A16uHb
Level - amzn.to/3Q7XXrI
Clamps - amzn.to/3P4A038
Painting your Hanging Bracket Video: • Painting Aluminum with...
Self Etching Primer - amzn.to/404t3Vz
Black Matte Paint - amzn.to/3ZZ7KoZ

Опубликовано:

 

27 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 60   
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Need the hanging bracket for your shelf? I am going to be making hanging brackets for purchase. No worries about making it yourself. The rest will be in the hanging bracket kit. Kit is $60 with free shipping. (free shipping for CONUS only). Email me for details at PopCultureLivingRoom@gmail.com
@MrRatatouille
@MrRatatouille Год назад
does it include the acrylic as well?
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
This is only for the hanging brackets and includes t-brackets to attach either the wood shelf or the metal and acrylic one.
@DonPeppinoo
@DonPeppinoo Месяц назад
Don't you worry, papa costa has you covered LOL!!!! I can't brag enough how much you are the man!!! That's why the community knows these cases as the, CostaCase!
@PopCultureLivingRoom
@PopCultureLivingRoom Месяц назад
@@DonPeppinoo Lol. Thanks again Don! You Rock!
@DonPeppinoo
@DonPeppinoo Месяц назад
@@PopCultureLivingRoom NO!!! YOU ROCK MY MAN!!! lol... I'll be there for your lighting tutorial on the 7th. See you there.
@The_Dog_Father_1618
@The_Dog_Father_1618 Год назад
I always enjoy watching your DIY videos! The step by step instructions that you provide gives people like me confidence to make amazing displays for our collection! Keep up the great content!! 🤘🏼👊🏼😆
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thank you so much Jared! It means a lot. Hopefully I can entertain you guys and give you quality content for a long time.
@Dannyspotchka615
@Dannyspotchka615 Год назад
My journey of building one of these begins this week! Thank you for all these helpful videos !
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
That is awesome! I believe I told you you could reach out to me anytime you have any questions so don't hesitate to do that. Make sure you take lots of pictures. I'm going to want to check it out. And maybe put it on my live stream when I start them up again.
@Dannyspotchka615
@Dannyspotchka615 Год назад
@@PopCultureLivingRoom thank you Costa!! I’ll def take some photos and I think I’ll put a video up about it on my YT ! Def will reach out if I got any questions ! I’ll dm you some photos of it through the process . Cheers bro 🍻
@99problemstoysaint1
@99problemstoysaint1 Год назад
Your enthusiam is a joy to watch and as a fellow toy collector i respect the whole project. But how many people could even buy all the correct supplies much less build these. Most of us cant put together pre-made ikea or target stuff. But your amazingly skilled at this & perhaps you should consider selling them. 👍🏻👍🏻👍🏻👍🏻
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thank you so much! You'd be surprised how many people have made this and the other cases. It's really not hard. I am selling the hanging brackets in a kit at the moment which can easily be paired with a wood board if you're looking for something nice and easy. Everything you need to add a wood shelf to your garage shelf display is in the kit except the wood. I also have a tutorial on how to make the wood board. It's super simple. Go to Lowe's, buy the board, have Lowe's cut the board and you paint it any color you want. Then use the kit to add it to your display. I am thinking about doing commissions. We'll see. Thank you again for watching!
@bobafettuccine666
@bobafettuccine666 Год назад
Another great video and excellent design Costa!!! Looks amazing!!! You da man, man!!!!
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thank you so much my friend! I had to fix the original video so that it had the correct measurements but I did it. And I added some music and stuff. I'm digging it. Thank you for your continued support.
@bobafettuccine666
@bobafettuccine666 Год назад
@@PopCultureLivingRoom Absolutely, and thank you for doing what you do! Yourt videos are informative, and very fun to watch!
@zillabountyhunter7047
@zillabountyhunter7047 6 месяцев назад
Needed this thank you and good work.
@PopCultureLivingRoom
@PopCultureLivingRoom 6 месяцев назад
Thank you!!! I'm happy I could help!
@blknazn1
@blknazn1 Год назад
Love the tutorials for these shelves man, great content. I dont know why more people arent subscribed. Im going to share this with some of the 1/6 scale figure groups im in on Facebook. Keep up the good work
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thank you!
@BXDRAGONX1
@BXDRAGONX1 10 месяцев назад
Lmao!!! Screw!!!! We never grow up!! Great video! I need you as a neighbor to create these for me.
@PopCultureLivingRoom
@PopCultureLivingRoom 10 месяцев назад
No we won't. Lol. Thanks for watching and thanks for the support!
@demetrioramirezleija
@demetrioramirezleija 10 месяцев назад
Subscribed! Dude great work on your content! Keep it up!! :D
@PopCultureLivingRoom
@PopCultureLivingRoom 10 месяцев назад
Thank you! Some good stuff is coming. Stay tuned.
@johncuevas2323
@johncuevas2323 7 месяцев назад
Love your idea on how to show your display. Have only one question? How much weight can the floating shelf hold? Cause I have premium format statues. Was thinking of doing that for my shelves. Just wanted to know since you made them. Great idea.
@PopCultureLivingRoom
@PopCultureLivingRoom 7 месяцев назад
Thank you so much! The shelves in the aluminum and acrylic can hold a considerable amount of weight. I have upgraded the t-brackets from 3" long to 5" long and they're a bit wider. Hoping to do an update video soon. I will see how it does with the couple premium format statues I have. Thanks again!
@johncuevas2323
@johncuevas2323 7 месяцев назад
@@PopCultureLivingRoom thanks for that info. Really like your videos. Continue doing what you’re doing. When I finally get done with renovations I’ll let you know how it comes out. 👍
@dailydrivendiecast
@dailydrivendiecast 8 месяцев назад
Pretty sick dude! I don't collect figures but this works for so many other things.
@PopCultureLivingRoom
@PopCultureLivingRoom 8 месяцев назад
Thanks so much! The tutorials are definitely for all types of collectors. Thanks again for watching!
@williamnelson9854
@williamnelson9854 Год назад
Where can I get some figure stands. I have all the Iron Maiden Eddie figurines. I'm getting ready to build this case. It's just what I'm looking for.
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thanks so much for watching! What size are your iron maiden figures?
@williamnelson9854
@williamnelson9854 Год назад
8" figures
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
@@williamnelson9854 There are a few types of stands available on Amazon for 8" figures. Here are a few: amzn.to/45fb5Td amzn.to/3OHork9 amzn.to/44eUZrx Hope this helps!
@robertonline6543
@robertonline6543 Год назад
Dude ...I don't know whether to hug you or strangle you...I took the plunge because of you. I really hope you do an easier video for us dumb ppl who totally suck at math and Don't have all these tools ...way too many steps .
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Lol. I would prefer hug. Thank you so much for watching! What's funny is that I didn't have all these tools before I started making these shelves myself. I do have another floating shelf video coming out hopefully later this week and it is using a wood board instead of the aluminum and acrylic. It will be easier and I'm personally liking it better. If there's enough interest, I may do a batch of the hanging brackets. It'll come with everything you need to hang an aluminum shelf or the wood shelf.
@robertonline6543
@robertonline6543 Год назад
@PopCultureLivingRoom hate saying this but I go blank when math thrown my way...math to me is like telling a joke that you understand 3 hrs later so I'm hoping you're next video is alittle easier to understand for us math dummies...I finally got my shelves today...so far so good...the ad says can hold 300 lbs but the wire mesh feels like it'll break in half so don't know how anything heavy will hold? Trying to make all black... what were those black sheets 🤔 you mentioned in your earlier 🤔 videos? I have one of those black storage shelves, it says use a rubber mallet and put pegs into the frame....weird....all new and alittle scary for us who are afraid it will look crappy but hopefully comes out as we dream.
@Zorthal
@Zorthal 10 месяцев назад
You can also get countersunk bolts for a flush finish.
@Zorthal
@Zorthal 10 месяцев назад
If you research extruded aluminum fittings, you'll find there are fittings that will allow you to cut the extrusions at a 45° mitre and then use L connectors on the inside.
@PopCultureLivingRoom
@PopCultureLivingRoom 10 месяцев назад
Thanks so much for watching! I like the idea.
@Genrou138
@Genrou138 Год назад
Care to give a rough estimate as to how much these 2 shelves cost to make? I'm just looking for an estimate so i can have all the funding before starting. I'm currently rennovating the room that i plan on building the display case for. I've had some large models for years that I've been waiting to display. These build videos were exactly what i needed.
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thanks so much for watching! The cost of the shelves vary depending on where you live. The estimate is based on if you live in the U.S. The acrylic floating shelves are very expensive. Mainly because of the acrylic and aluminum. For wo shelves by themselves for the aluminum and acrylic and screws will cost approx. $160. Big reason for the cost is we're still recovering from the affects of covid and shipping costs are crazy right now. The hanging brackets and T Brackets will cost another $30+ for the materials. If you want to go a less expensive route, I have my wood floating shelves video. They look really good in the display. Let me know if there is anything else I can help you with.
@Genrou138
@Genrou138 Год назад
@@PopCultureLivingRoom i did watch the wood shelf video, but I was just fascinated with the build of the acrylic ones. It gives me similar vibes to playing with erector sets as a kid, and that got me super excited!
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
@@Genrou138 I know what you mean. Are you U.S. based? If so, I have a US based company for the aluminum. They are a recent find.
@Genrou138
@Genrou138 Год назад
@@PopCultureLivingRoom yeah. I live in Eastern Pennsylvania
@Genrou138
@Genrou138 10 месяцев назад
Can you let me know the name of the company? I'm finally at the phase of my remodel that I can actually start on my display case build
@Redshirtlifer
@Redshirtlifer Год назад
Phrasing! XD
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thanks for watching Amir! Appreciate it. I saw you're looking to start a RU-vid channel. If you need any help, don't hesitate to reach out.
@Redshirtlifer
@Redshirtlifer Год назад
@@PopCultureLivingRoom I'd appreciate it! Need to get the equipment and want to build a few more dios before possibly kicking off this venture 🙂
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Sounds great! The most important things to start are the lighting and microphone. You can easily use your cell phone for the video. And even the lighting in the microphone don't have the cost that much.
@sixthscaleshero
@sixthscaleshero Год назад
Great tutorial, Costa!
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thank you Helen!
@jcolett444
@jcolett444 Год назад
Love your videos. Very inspiring. I would be curious to see your wood shelf version for this. I took the plunge and plan to make it soon.
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
Thank you so much! That's awesome! If you have any questions during your build, please do not hesitate to reach out to me. The wood shelf looks great and I think I may like it better than the aluminum one. It's also much cheaper and you can make it any color. I think it's more accessible. I'm also thinking about selling the hanging brackets, if there is enough interest. Thank you again for your support.
@jcolett444
@jcolett444 Год назад
@@PopCultureLivingRoom I am now really curious to see the wood shelf. Btw, I was considering felt to cover the boards, is it better to hot glue or staple that type of material? Oh, my son thinks you're hysterical. Loves your channel.
@PopCultureLivingRoom
@PopCultureLivingRoom Год назад
For the fabric, I prefer stapling. If something happens to your shelf or you want to change the look, you can easily do it by removing the staples from the fabric. Tell your son he rocks!
@jcolett444
@jcolett444 Год назад
@@PopCultureLivingRoom Thanks for all the help!
Далее
DIY Custom Display Case From Scratch
31:48
Просмотров 126 тыс.
С какого года вы со мной?
00:13
Просмотров 174 тыс.
Самая сложная маска…
00:32
Просмотров 1,2 млн
My NEW Favorite Display Case!
10:53
Просмотров 25 тыс.
Vertical Sliding Storage Shelves | Maximized Storage
21:43
DIY Floating Shelves with a Secret
17:19
Просмотров 2,4 млн
С какого года вы со мной?
00:13
Просмотров 174 тыс.