These guys lived in Ukraine and had a TV/Radio Repair Shop. They started their channel during the war in Ukraine. So basically the modern world had come to an end for them. I think they must have been making money from their channel because they have done a ton of videos (unfortunately most are in Russian).
Guys wtf 😂 400 Amps ? 100 amps? 😂😂🤣🤣🤣 That motor has maximum 600W not 88000W or 22000W 😂😂😂 A house has a fuse of about 40A to 60A. This motor having maximum of 600W uses 2.6A to maximum 3A not 100A. Because is 220V x 2.6A which gives about 572W. So as long as they have above 2.6A then they can have a good torque on the motor to push the person on the bike.
@@girlsdrinkfeck well yeah if you pass lots of Volts or Amps through it. But if it was 10A at 12V it would be fine or 5V at 20A but more than 100W is not that good for a long period of time.
Gotta love those universal motors. If you're powering it straight from the battery you should be able to PWM power to the motor to get throttle, just make sure the FETs are logic level and flyback diodes are good, and you can use the signal from the accelerator you already have.
Nah he closed the eyes 😂 I weld with normal sticks and they are a pain in the ass with that mask so sometimes I just close the eyes right before I touch the metal if I spot-weld.
Love these videos! I have an old rusty cycle like that at our village house, I'm thinking to somehow power it with a drill motor or something. Your videos are a great inspiration for ideas.
Use any Motor from a Scrap Car...Heater Blower Motor.....The Starter is good...and Powerful..and They only Require 12 Volts to Run....I Made one with an old Blower Motor and it will go 35 to 40 Kph....And I use Li Ion Batteries in Blocks to Power it....And an old Drill Switch as a Throttle.
So awesome guys! The idea about the throttle seems similar to the Excelerator pedal on new cars these days… Although I prefer something more direct as well. Thanks for the videos, cheers!
*@KREOSAN English* ----> to *@WeldingDude* eg: 7:35 Make him use welding glasses, so he don't get blind in like 3 years from now. Or at least take some regular glass & black it with fire. The danger is from UV- & IR-lights, that we can't see. those "protective" see-through glasses does NOTHING to stop the dangerous lights.
Sir you could have used a tire jack to increase the width of the frame near the rear wheel. Would have saved a lot of time and stretched the frame without breaking it but lovely video
Try placing a pure sine single-phase transformer with a power supply of more than 1000 watts on the bike and have it on the frame. Then you plug the washing machine motor cable into the pure sine transformer. after you do it the motor will work at 15000 revolutions. To adjust the revolutions from the motor you will need a speed controller for 12 volts or for 24 volts. If necessary, try placing a gear on the motor shaft and a different gear on the rear wheel shaft. Install a chain from the washer motor to the rear wheel sprocket.
That motor would probably handle 400vdc for about 30 minute burst, maybe add a fan to help cool the brushes! Don't forget, as volts go up so does the current, meaning double volts, 4x the wattage,
CREATIVE + IN SANE = KREOSAN...!!! 🤪😎 I LOVE YOUR IDEAS...! Next time use super Capacitors/ high ampere for your EV ...! we want to see what happens 🙃 !!!
This really be something to increase toward 220 volt DC from even more of batteries. Washing machine motor is brushed type that even DC can also work. You may have really insane power from full 220 volt DC.
That bike tube is an antique the damn thing has tons of patches on it and it has made in the USSR on it LMFAO!!! The USSR have not been around since 1991
I love your guys style. It sure isn't pretty but better than that it performs like all your videos. America is going through a transformation no safe bet all cards are on the table. My style is like your style not pretty but does the job. When you give things away and comes back and bigger rewards. You guys are an inspiration thank you so much. ✌️👌🙏🖖🏼🚀😉. Michael.
