Easy Plug and Play Turn Signal Kit Install | Polaris General | How To | SuperATV

Подписаться 30 тыс.

Просмотров 49 тыс.

50% 1

Our deluxe plug-and-play turn signal kit is the easiest turn signal kit to install yet. It uses dash-mounted rocker switches for the turn signal, hazards, and horn that all illuminate as expected. From end to end it utilizes OEM style plugs to connect to your factory wire harness for ease and reliability. It utilizes the OEM brake lights for the rear signals. For the front signals, our Deluxe Kit includes for amber LED lights for maximum visibility. The completely sealed and water-resistant control box coincides with IP67 standards. That means it worked even when immersed in three feet of water for thirty minutes. The box mounts conveniently under the hood using the included mounting bracket. It’s easy, it keeps out water, and it’s durable. Our deluxe kit fits so well, your friends will wonder if it’s OEM.
Note: Requirements for street legal UTVs vary from state to state. Check your local laws before driving on the road.
Get your turn signal kit today:
www.superatv.c...
#SuperATV #UTVTurnSingalKit #PlugandPlay

Хобби

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@jimschoenwalder7269 3 года назад

I very much appreciate the excellent video. Helped quite a bit. But again don't need the background noise.

@jeffhovatter6063 4 года назад

Slightly different on my 2020, But it went on. Also need connector plug for the power bar.

@EC_ATV_Outdoors 3 года назад

Everyone is going on about the music, but nobody is concerned that "Easy" is more like, take the whole thing apart then run wiring across the whole machine, then put everything back.

@bobwenninger1687 Год назад

my horn does not blow, hooked to a seperate power source and ground and it blows nice and loud!!! but would like for it to work through the button, and as soon as i started to put a bend in the horn bracket it broke! the metal is super brittle!!! i called the help number and no help whatsoever!!! because i bought it through a dealer!!! very unsatisfied!!! but the turn signals work as they should,

@SuperATVMedia Год назад

Hello Bob, it sounds like you may have a bad horn switch. We do need your proof of purchase or shipping info to locate a purchase, but once obtained, we can get both items replaced. If you'd like to send us over an email or give us a call with this info, we can make sure this gets taken care of for you; sales@superatv.com, 855.743.3427.

@lukedaoutdoorguy7639 3 года назад

Is there enough wire for a 4 seater

@terrymcgraw8624 Год назад

If you connect to power source that always on will that cause my tail lights stay on. Need a power source connector ?

@SuperATVMedia Год назад

You will need to connect this to a keyed-on power source instead of directly to the battery.

@1doublet777 3 года назад

Nice instructional info. But why the annoying background music as loud or louder than the guy talking??? I don't have to be entertained while trying to learn something.

@danielweaver6602 4 года назад

How do you connect to key switch?

@craftman5632 4 года назад

Look at 11:45

@vincethibodeau4260 4 года назад

I just install this kit on my Polaris general 1000 and the break light stay on even after the key shut off also the indicator light is not working on my lever is there something im doing wrong .

@SuperATVMedia 4 года назад

Sounds like you may have a wire or two hooked up incorrectly. Be sure that that 12v power source wire is hooked to the key on power terminal. Use a test light to make sure that terminal is only hot when the key is in the on position. If you can't figure it out, please don't hesitate to pick up the phone and give us a call at 855-743-3427 we'd be happy to get you fixed up.

@vincethibodeau4260 4 года назад

@@SuperATVMedia ok thanks for the info i will definitely check the wiring . Also i notice that the indicator light on the turn signal is not working,,,, wondering if it suppose to work or not,,, those 2 green light and the red light .

@SuperATVMedia 4 года назад

@@vincethibodeau4260 Your welcome, yes the indicator light should illuminate. I would venture to say it points back to the wiring. If for some reason it doesn't light up with the wires hooked up correctly, give us a call and we'll address the issue.

@vincethibodeau4260 4 года назад

@@SuperATVMedia ok sounds good . Not home at moment but will check it out next days off . Thanks for the responded not often that a company response to a question this fast , and for that i give 10 out 10 star .

@SuperATVMedia 4 года назад

@@vincethibodeau4260 Thanks Vince, don't hesitate to pick up the phone and give us a call if you need any other assistance. Have a great week!