Easy Repair For Broken Doorbell!

Подписаться 108 тыс.

Просмотров 849 тыс.

50% 1

What's better than fixing your doorbell? A spare car key without leaving home! I started Tom's Key Company (tomskey.com/?u...) so you can get quick and affordable DIY spare car keys and fobs shipped to your front door.
A broken doorbell can usually be fixed very easily and without any special tools. This video will show you how! Buy a new doorbell chime:
Amazon USA: amzn.to/2dZ2KcK
Amazon CANADA: amzn.to/2eFxbWt
Amazon UK: amzn.to/2ejd5G3
Affiliate links

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 456

@clandestino 3 года назад

I secretly watched this video and then fixed it like a champ in front of the family. I stay winning.

@MrMshaka 3 года назад

I wish I would've thought of this. 😆

@vezzothc 3 года назад

@@MrMshaka same🤣

@stevejones2782 2 года назад

LOL.

@samuelpena7305 2 года назад

You're a big fat phoney lmao I'm jealous

@erickjamale 2 года назад

Lol 🤣

@cyndihall5170 7 месяцев назад

We’ve been in our home for 9 months with a broken door bell. So thankful for your easy fix option of just moving the wire. It’s fantastic! Thank you!

@TomahawkDIY 7 месяцев назад

We're glad it worked out for you! 😊

@gl846 4 года назад

I had a faulty door bell chime and decided to install google nest hello. The front chime kept vibrating and it thought it was something I did wrong with the installation. I was going f’n bananas for hours and was about to give up until I stumbled on this video. I rewired the chime as you instructed and voila problem solved! Thanks a million!

@angharadswansea9343 9 месяцев назад

Thank you so much. This is perfect. I only have a front door. I live in a condo. I am totally going to do what you showed us in this video and cut out the top thingamabob. Happy new year!

@husamtamimi8475 4 года назад

Thank you!! I've just switched the wire from the front to rear side as instructed and everything has worked out! Much appreciated!

@lfeyt 3 года назад

Thank you for this super helpful video! This video highlighted my exact issue (broken buzzing chime after doorbell was jammed), and I was able to fix my buzzing by rewiring it like you showed.

@TrikesAndTrails 9 лет назад

Thanks for the vid! My chime issue wasn't any of those that you listed(the chimes were very muted), but seeing what a correctly operating chime was supposed to look like lead me to replacing the rubber plunger to chime insulators, and all works well again!

@scraype4111 6 лет назад

Great Vid! I just switched the wire from the bad striker to the good striker (removed the foam pad) and it works perfectly now! I just had a bad striker. Thanks for the awesome vid!

@N8747U 10 лет назад

Thanks for saving me money and sharing your knowledge!! Kudos to you.

@scottycards9876 9 лет назад

Switched terminals, worked like a charm! Thank you!

@joselobo51 8 лет назад

Great video. I followed your instructions and it worked perfectly. Thank you!

@marykeenan6723 4 года назад

The only video that had my exact problem, thanks for the solution and for making this video!!

@TomahawkDIY 4 года назад

Glad it was helpful!!!!

@norsypraseurt7773 7 лет назад

WOW. You just saved me a bunch of time! Thank you good sir!!!

@TomahawkDIY 7 лет назад

+deez Nutz So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).

@mayraortiz1127 7 лет назад

Yess! it was very helpful. Similar to all the other comments haha simple switch of the wire helped, saved me a trip and money!! thank youu!

@TomahawkDIY 7 лет назад

+Mayra Ortiz So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).

@adammerk9811 6 лет назад

This is exactly what I was looking for! Thank you so much!

@TheDrflay3 Год назад

This worked for me! Brilliant! Thank you so much!

@TomahawkDIY Год назад

Awesome! Glad it helped!

@capeman10 9 лет назад

Thank you so much, it took longer for me to set the ladder up than it did to change the jumper over to the rear door terminal.

@name7ess 8 лет назад

i fixed my doorbell doing this! thank you!

@grjosep 10 лет назад

helped me fix my bell. My front was broken and did not have a bell at the back, so rehooked the front wire to the back.

@EquityPark 10 лет назад

Very helpful. Thank you.

@johncollins5423 7 лет назад

We have an old chime the wire are currently connect to a screw labeled "T" and a wire connected to screw labeled "2." Is the "2" the same thing as "F"? There is only one doorbell on the house. Thanks.

@TomahawkDIY 7 лет назад

+John Collins I'm not sure. Good luck

@hiboy00 4 года назад

Why do they put 2 strikers on there and block 1 when they could just do 1 and lose the plastic thing that you cut away? Oh, and thanks for the fix!

@tonyuminski4075 Год назад

Watched your video. Was prepared to battle this out. Opened the box and -- none of the connections were on the outside of terminals!!! Is this the reason it doesn't work? I tried to install a Ring bell -- with no success on the actually 'ring' so I don't know what to do next. Any ideas? Thanks!

@franktang 3 года назад

thank you very much!

@PROPER444 6 лет назад

Thanks a lot fix my problem

@peddizz 7 лет назад

Didn't fix my door bell, any other suggestions?

@TomahawkDIY 7 лет назад

+phani peddi could be a wire that failed or just time for a new doorbells

@deatricejeff7831 10 месяцев назад

Can I use this with my ring doorbell and camera. Where is the transformer

@biglou3441 4 года назад

Hey what do I door with doorbell if its making a humming sound.

@bernarddowd9248 7 лет назад

Perfect advice...it worked!

@TomahawkDIY 7 лет назад

Glad to hear it worked with the newer models! I'm going to update the description - thanks for letting me know. Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission (TomahawkDIY.com/about). No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances

@glaxatore 6 лет назад

This is the same system I have. Hack worked but now I'm having a loud humming and buzzing sound.

@carolpatton3505 3 года назад

Me, too. I disconnected a couple of the wires to make it quiet. Guess I need a new one.

@timmy-the-ute2725 3 года назад

The striker really do go bad.

@Celeste8808 2 года назад

How to make the sound louder?

@ACSMusicSounds 4 года назад

Where is my door bell ringer located ???

@rogerwalton9330 6 лет назад

I have to hold my button in for my door bell to work...Help!!!

@Zombiemurderer 10 лет назад

Thanks for the info

@spurlyfamilyadventures 2 года назад

I’ve watched sooooo many videos and YOU and ONLY YOU were the first one to actually give an easy fix. This was soooo easy. And I look like a pro without having to go get voltage testers and go through all that. You, my friend, get a gold star. Thank you!!!!!

@rascalurock 3 года назад

Thank you for this! Our doorbell didn't work from the day we bought our house. The first time around, my dad got it working but recommended we replace our button. After replacing our button, it worked for awhile, but then broke again. After watching your video, I felt comfortable enough to open up the chime box and realize the fix was a super simple changing of the chime from front to back. I even taught my husband a thing or two after ;) Thank you again for sharing!

@philprentice1430 Год назад

This video may be 9 years old, but it still is awesome! Thanks, took me about two minutes to fix my broken doorbell thanks to your video.

@TomahawkDIY Год назад

That's really great to hear. Glad to help!

@joenellable 2 года назад

Thanks so much for this video my doorbell wasn't working and purchased several plug in doorbell units (but thats another story) i came upon your video removed box and bam it wasn't even connected i reconnected the wires and doorbell works thanks

@maggieprice3688 Год назад

Thank you! This worked! Wish you had a donation button. This saved me calling a handyman!

@TomahawkDIY Год назад

So glad to hear it helped you!. Donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about). Hope you subscribe too, thank you!

@pacod777 7 лет назад

Thank man! Switched the front wire to the rear and you just saved me a trip to the hardware store to buy a new chime

@blessed3274 3 года назад

I just did this I agree and it works

@danielsheets463 4 года назад

If you having doorbell problems I feel bad for you son. I got 99 problems but a doorbell ain't one, press it

@AdamHumenuik 6 лет назад

I don't understand how anyone could give this video thumbs down. It 100% fixed my problem. This is one of the most helpful video I have watched in a long time. Thank you!

@waranda6068 8 месяцев назад

he never fixed the problem he just jeri rigged it. What if you have a rear doorbell attached? It would still be broken.

@KevinJDildonik Год назад

Thank you so much. My case: Glue came off the plastic cap on front side. The pin dropped as there was no spring tension. They painted the bell onto the wall so I didn't want to pry it loose. So I switched power to the rear and bent the stopper, making the back side ding-dong. But I will also save the plastic stopper from the front. If the back ever gets stuck, I can re-glue the front. Here's to trying to remember where I put the spring in 10 years when it finally sticks.

@miekolock4060 3 года назад

Was at a job, ladies ring/nest door bell went up. Changed out bad transformer but the interior doorbell still wasn’t sounding off. Swapped the wires as in video, worked like a charm.

@oldilocksc3651 8 лет назад

Our doorbell has been giving us grief for months! After watching this, while in my robe and slippers, I grabbed a step stool, screwdriver and needle nose pliers, fixed the doorbell, AND made a donation in less than in five minutes. Thank you so much!

@twindye1 10 месяцев назад

🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉Just because u wanna see everybody eat.. don't mean it's yo job to fix their plates

@thomastwigg8366 8 лет назад

You should change the title to "How to Hack your doorbell system". Great idea, it worked for me. And you saved me a trip to the hardware store.

@omarrodriguez7323 Год назад

Thank you so much for the info. I fixed like a pro after 8 years. I even forgot that the door bell didn't worked until I had visitors today and I said this is embarrassing. It took me like 3 minutes to fix it. Thanks again

@TomahawkDIY Год назад

That's awesome! Happy to help

@nikkimoore19 7 лет назад

OMG! Thank you so much. I had someone who wanted to come out and charge me $80 to repair my doorbell for the new house I just bought. I'm a single lady, and don't mind trying to repair things myself, but the videos online were not helpful-I love This Old House, but they were no help. You are awesome! Your video was exactly what I needed to fix my doorbell, it was like you were right here with me, even down to cutting the piece with the sponge. I had to switch wires and use the chime for the back door. I cut the black piece with the sponge attached so I would get the "ding dong" effect. Thank you so much.

@TomahawkDIY 7 лет назад

+nikkimoore19 Glad to hear it worked!! Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission. No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).

@air23evil 3 года назад

Thank you so much I’m selling my house and after removing my ring doorbell and installing a generic one I noticed that the chime wasn’t sounding. I did exactly what you showed here and it worked like a charm.

@PrettyP08 Год назад

Thank you for this easy fix. We just fixed our doorbell thanks to this video :) 😊

@tinkerbellstar18 6 лет назад

Been in my house for almost a year now and I kept putting off getting my doorbell fixed because I didn’t wanna spend. I just fixed it myself after watching this video lol. Thank you very much for the help!

@polymyxa8233 7 лет назад

This is such a simple but extremely intelligent repair work! It is exactly what I was searching for when my doorbell sounded gagged. Thank you, Tomahawk DIY!!!

@TomahawkDIY 6 лет назад

+polymyxa So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).

@bellagrace9812 4 года назад

I just replace my doorbell and the doorbell light came on but no ring. Watched your video and moved wire to 3rd screw (rear) and it now works. Thank you so much. You saved me time and money.

@xenaapw Год назад

Thank you so much for this video, I know nothing about repair and you helped me fix my doorbell. I am so excited and proud of myself. Thank you for inspiring me and teaching me.

@TomahawkDIY Год назад

Wonderful!

@AgriKeny 7 лет назад

Excellent! I just brought my doorbell back to life. The front plunger was stuck and I simply moved the wire to the rear connection and broke the tab, as you described here. Now the bell is working. Thanks a lot.

@TomahawkDIY 7 лет назад

+Agri Keny So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).

@calumetcity3308 Год назад

Thanks so much! Totally solved my problem by switching the wire to the rear and removing the tab. Was about to buy a whole new chime. This saved me the time and expense!

@TomahawkDIY Год назад

Nice to hear that! Happy to help

@pland99 2 года назад

My issue,bought new doorbell unit,hooked up three wires,worked fine,then unit started humming,sam as old unit,no clue should i suspect transformer supplying power? Removed center wire while i research!

@weighit 10 лет назад

I love it when someone can show me how to save time and money. Good video, Thanks!!

@theguru83 8 лет назад

Worked like a charm!! Was a super quick fix :) Thanks a lot

@bir1320 Год назад

Fixed my bell after watching this video and my husband was very impressed 😊😂

@TomahawkDIY Год назад

Hats off to you! Glad to help

@barthc11 4 года назад

Wow! This was absolutely spot on. I have this same model doorbell and this fix worked perfectly in less than 5 minutes! Thank you!

@s2961mg1 7 лет назад

Wow, I can fix a lot of things....first attempt at doorbell. one look inside I was like...gotta go buy a new one..Saw your video, exact model exact problem exact fix in about 2 minutes! Thanks...BTW, home depots video doesn't show the fix part...just replacement...wonder why...

@TomahawkDIY 7 лет назад

+s2961mg1 Glad it helped you! No pressure, but if you feel like leaving a tip, you can through www.paypal.me/TomahawkDIY. Funds help support the mission of TomahawkDIY to help people Build Better Lives.

@SenorAntonino24 7 лет назад

Tutorial worked like a chime... My doorbell made a horrid buzz rather than a serene tone when pressed. I noticed the strike pin was completely stuck. I usually feel like a dumbbell when it comes to electrical repairs. But now, thanks to Tomahawk DIY, I'm ringing to a different tune. I'm sound of mind. And I no longer feel like a dingdong...Thanks Tomahawk DIY!

@TomahawkDIY 7 лет назад

Thanks for the musical comment!

@bob6610 3 месяца назад

for stuck plunger, rub the plunger with a little dish soap on a Qtip. move the plunger up and down a few times

@THE-CROWZ06 6 лет назад

Wow after 13 years I did fix my doorbell then I saw your video. 👊😂

@jefflopezphotography 10 лет назад

Worked like a charm, thanks for the tip!!! It didn't want to fire back up though, I removed the piece but still no top bell. Not a big deal, saved me 30-50 bucks so I'm happy. THANK YOU

@sethpailet204 4 года назад

Dude, you’re a life saver. This simple fix worked for my ring doorbell and buzzing sound I was getting from a broan NuTone doorbell chime. Thanks so much!!!

@Gentrol 5 лет назад

I have a doorbell that looks and sounds exactly like that. The only difference is the plastic is older. How old is the model?

@jessicahaughey849 2 года назад

GOOD JOB cutting out that dong blocker save it til the other 1 gets fixed

@TheJohnnyef9 4 года назад

I was about to move my wire but what I did was flick the door bell spring to ring the bell manually and I think mine was just stuck or had some dust/dirt in it and got freed up and it works normally now. So try that before switching wires.

@at2step 9 лет назад

Wow this saved me from buying a new ringer unit. Many thanks.

@nataliecasey1956 5 лет назад

Great explanation, i watched about 6 videos before yours and you were the only one to explain how the doorbell really works in order for us to trouble.

@gt9953b 10 лет назад

Had this problem today and fixed it exactly like your video. Thanks! BTW - What causes the front striker to get stuck like this and not fire? What brand of doorbell is this? I have the exact same one and it came with my house so I'm not certain.

@TomahawkDIY 10 лет назад

I'm not sure why it gets stuck. I'm guessing it might just be some part of the doorbell wearing out after being used for a while. Mine was about 10 years old. My neighbors have the same one and their house was build at the same time. Theirs also broke. No idea on the brand either.

@RyanSchwiebert112358 9 лет назад

Tomahawk DIY The terminal switch worked for me, despite my initial disbelief it would be so easy. I am also really curious why the first one stopped working. My doorbell is only 3 years old, the light had gone out in the switch, and the striker did not have any perceptible 'stick' to it. The weird thing was that you could manually jiggle the striker, the light would come back on in the switch, and you could get a weak ring out of it, but it wouldn't fire a second time without manual disturbance. The rear bell rings strongly. I can't see if the light's back on in the switch in daylight, but having the bell is enough.

@nottthereyet4872 6 месяцев назад

🛎 Our doorbell went out quite a while ago, and we never got around to fixing it yet. Then, all of sudden today, someone came to visit and rang the bell. Shockingly, it worked PERFECTLY! And . . .the bell Presser outside is LIT up again. The ring is music to my ears! 🎶 Is it a Fluke or a Miracle? Grateful, but Confused. 🤔

@paulamcmanus8207 9 месяцев назад

Thank you for being quick! 👍🏻

@PhuLy8788 4 года назад

I have the nest hello, it does the ding dong, but it goes really quick ! Not smooth and slow like yours. Any ideas ?

@NightriderXP1 6 лет назад

It worked switching to the back door ringer. However, when I removed the little white plastic block, it was attached to a black plastic piece mounted to the back. With the black piece there, the plunger couldn't hit the top bar. So I removed the black plastic piece and it broke the door bell completely. I'm bummed. I'm guessing that the spring couldn't move the plunger high enough to hit the top bar and now without the white and black plastic at the top, it was too far away from the bottom to hit the bottom bar. The plunger is sitting really high with the white and black pieces removed...

@gilbertlim2782 2 года назад

thank you, i fixed my doorbell.

@dorantgayle512 7 лет назад

Great job, I just followed your video and my door bell is functioning again. I was in the process of buying a new door bell. Thanks

@arianchandler9285 4 года назад

Thank you so much for making the video! Question: Can you wire two buttons to the same plunger? I have a wire going to the "rear" and a wire going to the "front", but the "front" plunger does not move anymore. Can I just move both wires to the "rear" screw?

@dan4091 4 года назад

Yes you can. All pressing the door bell button does is complete that circuit, so when you press the rear button the circuit is completed and it'll ring and the front bell being open is out of the circuit entirely.

@samting1852 4 года назад

My front doorbell only went "ding", not the two tone. I opened it up and noticed that the plunger spring had compacted. I pulled the plunger out and stretched the spring so that the top of the plunger was about an 1/8th inch off the chime plate. Now I have the two tone again.

@kerrysiu5846 Год назад

Thanks for posting this video. Worked for me!

@TomahawkDIY Год назад

You're welcome!

@mikeymusterhead9916 7 лет назад

Hey tomahawk, My doorbell on a rental house i have wasn't working after renters left. When i pulled the cover off there are three wires connected to doorbell and three wires hanging in the space not attached. I cant get it working no matter what i do, any advice.

@TomahawkDIY 7 лет назад

+Mikey Musterhead not all wires need to be connected. I recommend looking wires connected behind the doorbell button and ensure you are using the same ones at the chime. If you can find the wiring diagram for your doorbell on the manufacturers website, that will help.

@digger26 2 месяца назад

Ten years later and your fix is still working! Just tried it and had success. I did try removing the pad and the plastic tab but this did not work for the double strike. However, it is ringing on the single note rear bell so she is happy as it wasn't working at all before. Thanks for the great tip!

@dramaumass 7 лет назад

wow man thank you. turns out I had identical problem and you helped me resolve it.

@TyOTT-lg2wq Год назад

Very helpful video! Thank you very much!

@TomahawkDIY Год назад

You're welcome!

@tigerlilly6895 3 года назад

Okay... I have a doorbell that is now connected to a doorbell camera, so there is no way it can have a closed circuit. It never rang except about 4 months ago it rang once at 3:30 AM, then one day about a month ago at 4 PM , then 2 nights ago.. rang many times... like it's building up the charge... then last night it rang, lots of times again. Now tonight it's rang three times... Can anyone tell me why? Thanks :)

@johnq6123 3 года назад

Can you split the wire to make 2 separate chime connections? My chime burnt out when contractor was working on front door install (but he has no idea what could have caused it; LOL) I wanted to put double chimes side by side to replace old one (increasing DBs in same location); took the wire that was existing that was connected to burnt chime and spliced 2 new wires in (all 3 reds in one wire nut and all 3 blacks in the other). I already had 30amp transformer bc I wanted to this originally but never did. Thanx in advance for the help!

@ScaryTerryCards 3 года назад

Awesome Video, It helped me to fix (the shortcut) that the idiot electrician did when our doorbell didn't work the first day when we bought our new home. I put the wires back how it was and my doorbell worked and the light outside on the button. 1,000 thanks to you! Now I have a working doorbell after not having one for 5 years.

@uberurbana4894 6 лет назад

My doorbell would only ding....not ding dong....My ex husband put in a new doorbell for me after the last one broke. After you explained how they work, I looked at mine and he had the wire going to the rear doorbell which I do not have. I should have known he would half ass that like he always did everything else.....Thank you so much. I just switched the wires and saved myself money for another doorbell. And it rings correctly !!!!!

@CaptainRon13 7 лет назад

I need help. My door chime will dong. Voltage is correct. Button voltage is correct. Voltage at the chime is correct. The dinger will move with my finger, nut not with voltage. Is the chime shot? Thanks.

@TomahawkDIY 7 лет назад

+Captain Ron sounds like something broken electrically in the doorbell. Probably worth getting a new one rather than trying to figure out what electrical part had the problem. If you buy from Amazon, I appreciate if you use this affiliate link, which sends a small commission my way from Amazon, but costs you nothing. amzn.to/2dZ2KcK

@lak12765 7 лет назад

I installed a new doorbell chime and transformer for my ring pro doorbell. When I powered on the doorbell chime. I noticed a humming noise. The striker on the chime will not disengage. Could this be a transformer issue? I thought maybe changing out the transformer to a 16 voltage from what was like a 10 voltage transformer might have not been compatible with the old doorbell chime because the very same thing was happening with the chime striker like it is with the new doorbell chime.

@OGRH 5 лет назад

It is a good hack but it is not a fix... if it is something that you’re just not going to get around to buying for a while it’s a good quick way to start getting notified of visitors, but in my opinion the two tone doesn’t leave you feeling unsatisfied like the single tone does. I’m OK with the back door ring sounding a little awkward because anytime someone wants to come through the back door 😳... With that being said your video is still going to be useful to many people!

@daniellebattisti3483 11 месяцев назад

COOL but why do they put that piece in to begin with? Just asking Ive bought a new doorbell and button already only to get one ding 🤦🏻‍♀️

@WV591 8 лет назад

TU on the first part . but breaking that tab was not a good idea on mine. the rod falls out so now i have to buy a new one :-)

@TomahawkDIY 8 лет назад

+WV591 too bad breaking the tab didn't work for yours.

@WV591 8 лет назад

no problem for now, 5 minute epoxy and small block of wood took care of it. strange can't find those style doorbells.

@johndamsma5905 7 лет назад

Thank you! Moving the wire from the front to the back did the trick. My door bell works once again!

@TomahawkDIY 7 лет назад

+John Damsma So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).

@glennr2010 7 лет назад

DON'T do what I did. I attempted to cut off the striker block as described in the video. However, the entire piece which holds the little foam pad broke off and that holds one side of the bell bar. I am trying glue but I don't think that will work.

@samandlaurensanders8127 7 лет назад

Thank you thank you thank you!!! This same thing happened to mine and it fixed the problem! Was able to break of that tab and everything works wonderfully ! I can't tell you how many videos I've watched trying to fix it! & I was so happy to see it was the same exact door bell I have as well so that made it so much easier for me! Thank you,From the stay at home mom

@TomahawkDIY 7 лет назад

Glad it helped you! No pressure, but consider sending a tip my way. You can provide a donation via the "Support This Channel" on my channel page (ru-vid.com) or via Paypal.me/TomahawkDIY Half of all tips go straight to helping people in 3rd world countries Build Better Lives. Learn more here: tomahawkdiy.com/about.

@elizabethbaylor2683 3 месяца назад

phenomenal video. i'm amazed that you were able to just modify it to avoid replacing. genius!

@yupihaveone4070 Год назад

My problem is one of the rubber grommets that hold the bottom strike plate in place has deteriorated and no longer holds that plate in the correct position. That plate has sunk down too low for the striker to hit it hard enough to make it chime. Can’t find a replacement grommet anywhere!