EBAY'S Best B Series Turbo Kit 

I feel you. I was the same way b4 I boosted my GSR. Go get em tiger!😂 Thanks for watching 😁👍

Have you boosted your gsr I’m thinking of it to 😂

@@abe1199 Not yet, I've been having problems with the bottom end, so I may do a swap and go lsvtec boosted 🤷🏾‍♂️

@@willie110hh i have a em1 I’m thinking on outing a gsr in it and boosting it up idk what turbo kit I should use

@@abe1199 The link below is the exact same kit I used on my gsr build. Fits and worked great. Rev9 Turbo Kit rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575597721&toolid=10001&campid=5338700573&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F202050619501

Thanks. I have some Bosch 1000cc but I need a retune in order to use them. Good looking.

Thanks, also thanks for watching 😁👍

No problem, thanks for watching 😁👍

I feel you bro. But dont feel bad. The Toyota Sienna is a mini van that you can get with 300hp and all wheel drive! That was unheard of back in the day😫

Thanks. Thats a really good question. My integra PS was already deleted when I purchased the car. So I'm not sure. But I can try and find out for you. Thanks for watching 😁👍🏽

You would need to make sure the kit comes with a ac an ps compatible turbo manifold or just buy a ac/ps compatible turbo manifold an sell the one it came with if it dont fit lol

No sir. I never knew those existed til now. Thanks for the info. Also thanks for watching 😁 👍

You wouldn't need anything. Your engine is compatible. The kit is for all B-Series engines. Thanks for watching 😁👍

You should also pick up a hondata ecu and some bigger injectors and depending on mileage and hp plans you should rebuild the bottom end

I'm using a walbro 255 lph. And ebay injectors. Although I don't recommend ebay injectors. But get at least 650cc injectors. Thanks for watching 😁 👍

I'm not sure if the intercooler piping is correct for that year. But everything else will bolt up. Thanks for watching 😁👍

I know what you mean. I ended up boosting my integra because of watching boosted boiz on youtube😂. Thanks for watching 😁👍

No problem bro these same parts is all I need ?

Yes basically. But it would have to be for your model and year of car. So you wont have any fitment issues.

My first turbo car was an eg. To be honest that's what got me hooked on turbo. Thanks for watching 😁👍

If it has a dual cam b series swap yes. Thanks for watching 😁 👍

@@Duwop77 idek what a dual cam is bro Im running b18b1 and no problem man it was informational

Thanks. Yes it'll fit a b18b1. Dual cam is an engine with 2 camshafts.

@@Duwop77 oh worddd i got 404 adjustable cams so big bet 😎 i gotta put my motor together but thanks man 🙏🏾 subbed

@@NFSZay sweet, Thanks for the sub bro. Good luck with your build 🤙

Stock internals?

How many lbs

I made 250hp on my old setup. Smaller engine/turbo and log manifold. I haven't had it dyno'ed since my current setup. Also stock internals on 10lbs of boost. Thanks for watching 😁 👍

Thanks bro. I appreciate it. Thanks for watching 😁👍

Thats correct. No ac.

Yes, I've had manifolds crack on me. Usually it's a matter of time before they do with the high heat and cooling cycles. You just want to try and buy a decent manifold so it'll last a good amount of time before it crack. I try to by manifolds that's made out of schedule 40. Those seem to be in my price range. Other manifolds are better but I don't have 600-700 dollars to throw on a manifold. The manifold in this video lasted about 2yrs b4 it cracked. Which isn't bad for the price. Thanks for watching 😁👍

@@Duwop77 okay than you so much for responding same here don’t have much money to throw at a manifold so eBay has to be it again really appreciate it stay safe👌🏽

No problem. Anytime. Will do same to you 😁👍

I agree. But if the car starts and you need to drive it to a tuner long as you stay out of boost you'll be ok.

I’m trying to fit a hood exit with a ramhorn in my ek and it’s a tight squeeze

@@micahlawton what if you did a side exit? Check out the link below. www.google.com/imgres?imgurl=https%3A%2F%2Fhonda-tech.com%2Fforums%2Fattachments%2Fforced-induction-16%2F437654d1501528094-front-bumper-exit-exhaust-20141129_171300_zpsi0fouzoe.jpg&imgrefurl=https%3A%2F%2Fhonda-tech.com%2Fforums%2Fforced-induction-16%2Ffront-bumper-exit-exhaust-3232510%2F&tbnid=dPHhhCD0xxtzmM&vet=1&docid=q-zfF8BGx_xyQM&w=800&h=600&hl=en-US&source=sh%2Fx%2Fim

Thanks, I appreciate it. Good luck with the build. Thanks for watching 😁👍

Thanks I appreciate it. Everyone tends to talk about Amazon. It's all about Ebay!😄👍

I'm planning on running E85 with the new tune. Hopefully make around 330hp🤞torque arnd 2??. Also I'm using a walbro 255. Thanks for watching 😁👍

On a Pulsar gtx3076r on my b18c, good for 440 on 12psi.

I purchased from ebay. The link is below. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F284062901690&campid=5338700573&toolid=10001&customid=

Stock internals

I appreciate it. I plan on going e85 next. I'm glad you reminded me about the frequent oil changes. Thanks for watching 😁👍

It is heavy. But it also has almost 300 lbs of torque. It runs low 14's in the quarter. You might beat it with a tune. But it will give you a run for your money. Lol. So will the Nissan maxima. Thanks for watching 😁👍

It will fit all B series engines. LS b16 and b18 vtec heads. Thanks for watching 😁👍

Thanks, I'm running a chipped p28. But hopefully having it retuned for e85 with the hondata s300 v3. Thanks for watching 😁👍

We was about to get X rated. I had to catch myself 🤣🤣🤣 Thanks for watching 😁👍

I appreciate it. Thanks for watching 😁👍

Good so far. It's been at least 2yrs. Thanks for watching 😁👍

@@Duwop77 do anything internally? What whp u pushing?

@@miosmedia1111 no sir. Bone stock b20v. Haven't had it dyno tuned just yet. Thanks for watching 😁👍

Thanks bro, I appreciate it. Thanks for watching 😁👍

Thanks 😁🤙🏾